···
Log in / Register

How many kilometers for the first maintenance of BYD Han?

6Answers
Jesse
09/03/2025, 04:01:55 AM

BYD Han's first maintenance is at 5000 kilometers. Before the first car maintenance: The period before the first maintenance of a car is generally referred to as the break-in period. The surfaces of new transmission components always have certain minor imperfections, causing the contact and meshing between parts during operation to be less tight, resulting in more intense friction at contact points. If the operating speed is too high, it can lead to permanent damage to the components due to excessive friction temperature or load at the contact points. Contents of the first car maintenance: Free oil and oil filter replacement is provided. Additionally, if users have other needs, they can ask the 4S store staff to conduct some relevant car inspections, but it's important to clearly check the cost of these services.

Was this review help?
114
Share
Taylor
09/15/2025, 10:33:58 PM

I remember the first maintenance for the BYD Han is generally around 5,000 kilometers, but the exact mileage should be confirmed in the vehicle manual. After a new car leaves the factory, various components require a break-in period. After this initial distance, changes may occur in the engine oil, braking system, and other parts. During the first maintenance, the 4S shop usually performs free checks, including replacing the oil filter, inspecting tire wear, and assessing the battery status of the electric drive system. Having driven similar models, I've found that timely maintenance helps the car run more smoothly. Exceeding this mileage without timely attention could lead to minor issues accumulating, such as reduced motor performance. I recommend new owners follow the manual—don't push it. Safety comes first, and it helps avoid higher repair costs later. BYD service points are quite convenient, and booking an appointment doesn’t take much time.

Was this review help?
15
Share
Expand All
SanRichard
10/29/2025, 11:09:15 PM

When I drove my BYD Han, the first maintenance was set at 5,000 kilometers. After reaching this distance with a new car, I felt the power and sound became smoother. I took it to the 4S shop for a free inspection, which included checking for chassis looseness, fluid levels, and battery performance evaluation. Now, after several years of driving, the car still maintains good condition. Based on my experience, manufacturers set this value because after the break-in period of a new car, adjustments are needed for screws, chains, etc. If you drive a lot, especially on highways for commuting, you might need to handle it a bit earlier; if you drive less, just check whether the six-month deadline comes first. In short, don’t neglect the first maintenance—it’s a crucial step to ensure the long-term use of your car. Simply put, if the manual recommends 5,000 kilometers, just follow it on time for peace of mind and convenience.

Was this review help?
1
Share
Expand All
DelLydia
12/12/2025, 10:17:10 PM

From a technical perspective, the BYD Han's first maintenance mileage is recommended at around 5,000 km. During the initial few thousand kilometers of driving a new vehicle, minor run-in occurs between components, leading to fluid changes or clearance adjustments. Electric models particularly require inspection of the battery cooling system and high-voltage circuits to prevent early-stage failures. Delayed maintenance may result in increased power consumption or reduced range. Manufacturers set this interval to detect potential issues early, similar to regular human health check-ups. I advise owners to record mileage and schedule service when approaching 5,000 km. The cost is relatively low, typically covering basic items, which can prevent major repair expenses.

Was this review help?
3
Share
Expand All
EthanMarie
02/01/2026, 11:24:14 PM

The first maintenance is usually performed around 5,000 kilometers, and the cost is mostly free or minimal. From a cost-saving perspective: when you first buy a new car, you're full of enthusiasm, and checking key components like brake fluid and tire alignment at this mileage can extend the lifespan of parts. Delaying it might void the warranty, and paying out of pocket for any issues that arise would be unpleasant. For BYD Han's electric vehicle, battery maintenance is crucial, and 5,000 kilometers is a reasonable checkpoint. Follow the manual's guidelines and adjust based on personal driving habits—if you mostly drive in the city with less wear, you can delay slightly; if you frequently drive on highways, pay attention earlier. In short, keeping a simple mileage log and maintaining the car on time is more economical.

Was this review help?
10
Share
Expand All
Irene
04/27/2026, 04:20:26 PM

From a consumer's perspective, the BYD Han's first maintenance is set at 5,000 kilometers. During the initial driving period of a new car, components gradually adapt, and this inspection ensures there are no hidden defects. When driving my own car, I usually start making appointments around 4,500 kilometers, preparing the manual to check details. It's advisable to learn basic maintenance skills during servicing, such as cleaning battery terminals or checking tire pressure, which can save some car maintenance costs. If you frequently drive long distances or have a habit of sharp turns, 5,000 kilometers is a safe benchmark; delaying maintenance may lead to increased noise or reduced electrical efficiency. The key is not to forget the time frame—the manual states that six months is also valid—getting to the service center early ensures safety and efficiency.

Was this review help?
4
Share
Expand All
More Q&A

What is the curb weight of the BMW 320Li?

The curb weight of the BMW 320Li is: 1540 kg. Exterior of the BMW 3 Series: The all-new BMW 3 Series largely follows the design style of the overseas version of the new 3 Series model. The sharp LED headlights are connected to the enlarged glossy black dual-kidney front grille, complemented by the front bumper air intake and three-dimensional lines. The rear features straight and sharp taillight contours with internal L-shaped red light strips. Powertrain of the BMW 3 Series: The all-new BMW 3 Series long-wheelbase version is equipped with the new B-series 2.0 engine, delivering the same 184 horsepower as the current 320i/Li, but the tail badge is changed to 325Li. In terms of transmission, it is still paired with an 8-speed automatic transmission.
109
Share

What is the minimum engine displacement for motorcycles to ride on highways?

Motorcycles with an engine displacement of 50cc or above are permitted on roads. Below are the relevant regulations for highway riding: 1. Article 78, Section 5 of the 'Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China' stipulates: Highways shall indicate the speed limits for each lane, with the maximum speed not exceeding 120 km/h and the minimum speed not less than 60 km/h. On highways, the maximum speed for small passenger vehicles shall not exceed 120 km/h, for other motor vehicles not exceeding 100 km/h, and for motorcycles not exceeding 80 km/h. (According to this speed limit regulation, motorcycles can only ride in the outermost lane of the highway). 2. Article 83, Section 5 of the 'Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China' stipulates: The cargo compartment of trucks traveling on highways shall not carry passengers. Two-wheeled motorcycles are not allowed to carry passengers while riding on highways.
113
Share

How many colors are available for the Haval H7?

Haval H7 offers five color options: Hamilton White, Cocoa Brown, Sparkling Black, Pittsburgh Silver, and Castle Gray. Below are the related details: 1. The Haval H7 features a winged wraparound cockpit design, with a multi-layered integrated three-dimensional design style for the center console that complements the instrument panel. The multifunctional luxury seats support up to 8-way adjustment and come with seat heating functionality. 2. The H7 China VI version is also equipped with intelligent safety configurations, including Bosch's ninth-generation ESP body stability system, HBA emergency braking system, RMI rollover prevention assist system, HDC downhill assist system, HHC uphill assist system, TCS traction control system, BSD blind spot monitoring/LCA lane change assist system, and CTA rear cross-traffic alert system.
105
Share

What are the dimensions of the GAC Trumpchi GS3?

The Trumpchi GS3 has multiple models, and the body dimensions vary by model. Taking the 2019 models as an example: 1. The 150N manual comfort version, 235T manual comfort version, and 150N automatic comfort version share the same dimensions: length × width × height of 4350x1825x1655mm, with a wheelbase of 2560mm. 2. The 150N manual elite version, 150N manual luxury version, and 150N automatic elite version share the same dimensions: 4350x1825x1680mm, with a wheelbase of 2560mm. 3. The 235T manual elite version, 235T manual luxury version, 235T dual-clutch elite version, 235T dual-clutch luxury version, and 235T dual-clutch premium version share the same dimensions: 4350x1825x1685mm, with a wheelbase of 2560mm.
105
Share

What is the Function of a Safety Instrumented System?

It mainly serves as the alarm and interlock part in factory control systems, performing alarm actions, adjustments, or shutdown controls based on the detected results in the control system. Below is relevant information about the Safety Instrumented System: 1. Features: Based on IEC61508 as the foundational standard, it complies with the safety standard regulations for instruments stipulated by international safety associations. It offers broad coverage, high safety, and self-diagnostic capabilities, enabling it to detect and prevent potential hazards. 2. Basic Components: The Safety Instrumented System includes sensors, logic solvers, and final actuating elements, namely the detection unit, control unit, and execution unit. The SIS system can monitor existing or latent hazards during production, issue warnings, or directly execute predefined programs to immediately initiate operations, preventing accidents and reducing their potential harm and impact.
102
Share

How to Remove the Maintenance Reminder on a Passat?

To eliminate the maintenance reminder on a Passat, follow these steps: 1. Close all doors and turn off the ignition. 2. Press and hold the maintenance reset button with your left hand, while simultaneously turning on the ignition with your right hand (all dashboard lights will illuminate). Wait a moment until a non-flashing wrench symbol appears on the dashboard. 3. Release the button with your left hand and press the A button once. If the wrench symbol disappears, it indicates that the maintenance reset was successful. If unsuccessful, repeat the above steps. Why do vehicles have maintenance reminders? The purpose of vehicle maintenance is to keep the vehicle in optimal operating condition, maximize its performance, and identify potential issues early to prevent problems. Owners may forget to perform maintenance for various reasons, and the maintenance reminder serves to alert them.
110
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.