How Many Kilograms of Antifreeze Does a Car Generally Need?

1 Answers
Luna
07/30/25 12:56am
A car generally requires about 4 kilograms of antifreeze. Antifreeze prevents the coolant from freezing during cold winter parking, which could otherwise cause the radiator to crack or damage the engine cylinder block or head. How to Choose Antifreeze: The basic indicators of antifreeze are its freezing point and boiling point. On the market, antifreeze comes in specifications with freezing points of -15°C, -25°C, -30°C, -40°C, etc. It is advisable to choose one with a freezing point at least 10°C lower than the lowest temperature in your region. Can Different Antifreeze Brands Be Mixed? It is necessary to use the same brand of antifreeze. Different brands may have varying production formulas, and mixing them could lead to chemical reactions between additives, rendering them ineffective. Antifreeze Replacement Cycle: For vehicles that operate for long periods, such as taxis, high-quality antifreeze should generally be replaced once a year. For vehicles with shorter operating times, replacement can be done every two years or every 30,000 kilometers. To prevent excessive foam formation, which reduces the heat exchange efficiency between the antifreeze and engine components, ensure the product is within its validity period when adding it. Long-lasting antifreeze can remain effective for up to three years. If suspended particles, sediment, or signs of deterioration or discoloration are observed in the antifreeze, it should be replaced promptly, and the system should be cleaned.
Was this review help?
10
2
Share
More Forum Discussions

Can cars be inspected in a different location?

Cars can be inspected in a different location. Currently, the traffic management department has fully implemented cross-provincial inspection for small cars, trucks, and medium-sized buses. Applicants can directly undergo inspection in provinces other than the vehicle's registration location and obtain the inspection qualification mark without needing to go through the inspection delegation procedure. Large passenger buses and school buses cannot be inspected in a different location and must return to the vehicle's registration location for inspection. Inspection time requirements: Small and micro non-operational passenger vehicles are exempt from inspection for the first 6 years. After 6 years but less than 10 years, they must be inspected every two years; after 10 years but less than 15 years, they must be inspected annually; after 15 years, they must be inspected every 6 months. Operational passenger vehicles must be inspected annually within the first 5 years; after 5 years, they must be inspected every 6 months. Trucks and large and medium-sized non-operational passenger vehicles must be inspected annually within the first 10 years; after 10 years, they must be inspected every 6 months. Imported vehicles, like other vehicle types, can undergo regular inspection at any inspection station. Inspection precautions: Vehicles that fail inspection must be repaired within a specified time limit. If they still fail after the deadline, the vehicle management office will confiscate their license plates and prohibit further driving. Vehicles that do not undergo inspection without reason or fail inspection are not allowed to drive on the road or transfer registration. Vehicles that meet the scrapping conditions or exceed the specified service life will not be inspected, and their license plates will be revoked, their files canceled, and they will be scrapped.
16
2
Share

How long does it usually take for the Changan Ford Focus to reach normal water temperature?

The normal operating temperature of the engine coolant is approximately 85—95 degrees Celsius. After a cold start in winter, it takes at least 10 minutes of idling to reach this temperature. Additional Information: 1. When the coolant in the engine radiator reaches boiling point and produces a large amount of steam, numerous bubbles will form. If these bubbles occupy part of the cooling system, it can lead to severe water shortage around the cylinder walls, causing insufficient engine cooling. This may weaken the strength of components such as pistons, piston rings, and connecting rods, even leading to deformation, making them unable to withstand normal loads. 2. Under normal operating conditions, the engine typically reaches this water temperature within 2-3 minutes in summer. In winter, it usually takes 10-15 minutes or more to achieve this temperature.
15
0
Share

Can You Change a Tire on the Highway by Yourself?

You can change a tire on the highway by yourself. Here is some additional information: 1. It is generally not recommended to change a tire yourself. If you absolutely must change a tire, make sure to do so in the emergency parking lane while ensuring safety and without obstructing other vehicles. 2. When changing a tire on the highway, proper warning signs must be set up to avoid secondary accidents. 3. Drivers should also know how to properly replace a spare tire, as improper tire changes on the highway can result in fines and penalty points. 4. After a tire blowout, avoid steering erratically. At high speeds, erratic steering can lead to skidding or even rollovers.
1
0
Share

How to Check If Auto Insurance Is Expired?

Methods to check auto insurance expiration are as follows: 1. Check the compulsory traffic insurance label on the vehicle. The compulsory insurance label on the windshield will indicate the valid start and end dates, but this method is only applicable for checking compulsory insurance. 2. Check the insurance policy: a. Review the paper policy. The paper auto insurance policy will clearly state the valid start and end dates. b. Online policy information inquiry can be done through the official website, phone, or some apps. You can visit the official website of your insurance company, where there will be a policy inquiry portal on the homepage. After entering the required information, you can check the detailed expiration date. Alternatively, you can call the insurance company's customer service hotline, provide the policy number or ID number, and have the customer service representative assist in checking the expiration date.
10
1
Share

How Many Years Can Brake Pads Generally Last?

Generally speaking, the lifespan of a set of brake pads ranges between 18,000 to 60,000 kilometers. Below is relevant information on determining whether brake pads need replacement: 1. Observe the thickness of the brake pads: New brake pads typically have a thickness of about 1.5cm. As they wear down through daily friction, when the visible thickness is only about 1/3 of the original, it's time to increase inspection frequency and be ready to replace them. Brake pads have small raised indicators on both sides; when the pad wears down to the level of these indicators (2-3mm), it means they've reached their limit and must be replaced. 2. Listen for sounds: If the brake pads wear down to the limit, braking will cause metal-to-metal friction, producing a "hissing" sound. At this point, the brake pads must be replaced immediately.
8
4
Share

What Causes a Car to Shudder When Starting?

Reasons why a car shudders when starting: 1. Engine carbon buildup; 2. Aging engine mounts; 3. Faulty ignition coils; 4. Insufficient spark plug ignition energy; 5. Loose connection between the transmission and chassis; 6. Uneven engagement between the clutch pressure plate and clutch friction disc. Additional information: 1. Causes of carbon buildup: Mainly include not cleaning the throttle body for a long time, using the wrong gasoline grade or mixing different gasoline grades, prolonged overload operation, and prolonged idling. 2. Main function of engine mounts: To reduce and absorb engine vibrations during operation. However, this component is prone to aging during use, and once aged, it can lead to severe engine vibrations.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.