···
Log in / Register

How many days does it take to learn Subject 3?

1Answers
OQuinn
07/29/2025, 05:02:19 PM

According to the standards of the Ministry of Public Security, at least 20 class hours are required, but most driving schools usually allocate about 7 days, and some even only around 3 days. Precautions for the Subject 3 test: 1. Place your right foot properly: When not pressing the accelerator, always keep your foot on the brake. 2. Never look down at the gear shift: No matter how awkward it feels at first, you must control yourself, especially during the test. This mistake is most commonly made when preparing to start. While driving, your gaze should always be forward—this is a fundamental habit. 3. Don’t hesitate at traffic lights: The green light will flash a few times before turning red. At this point, based on your distance from the intersection and your speed, if you are close and your speed hasn’t slowed down, press the accelerator to pass. Otherwise, decisively brake and stop.

Was this review help?
118
Share
More Q&A

Is it normal for the Huansu S3L to have power but fail to start?

It is not normal for the Huansu S3L to have power but fail to start, and it requires timely inspection and repair. Below is a detailed introduction about automotive repair: 1. Overview: Automotive repair is a general term for vehicle maintenance and repair. It involves using technical means to diagnose faults in a malfunctioning vehicle, identify the cause of the issue, and take certain measures to eliminate the fault and restore the vehicle to a certain level of performance and safety standards. 2. Others: Automotive repair includes major repairs and minor repairs. Major repairs refer to restorative repairs that involve repairing or replacing any parts of the vehicle (including fundamental components) to restore the vehicle to a sound technical condition and fully (or nearly fully) recover its service life. Minor repairs refer to operational repairs that involve replacing or repairing individual parts to ensure or restore the vehicle's operational capability.
104
Share

What are the differences between the Geely Xingyue and Xingyue S?

There are mainly two differences between the Geely Xingyue and Xingyue S. Overall, the Geely Xingyue S is superior to the Geely Xingyue. Below are detailed introductions to these two differences: 1. Different appearances: The main design of the Xingyue S still follows the Xingyue, but the sense of sportiness has been enhanced in details. Its front face and side body are respectively decorated with the Thunder Magic Claw and Interstellar Shuttle trim strips, and the tail exhaust pipes adopt a high-gloss black dual-sided quad-exit design. 2. Different powertrains: The Xingyue S is equipped with a 2.0T engine across the lineup. In terms of powertrain tuning and transmission, the Xingyue S adds a new 2.0T low-power + 7-speed dual-clutch transmission powertrain version. At the same time, the 2.0T high-power + 8AT version is also retained.
105
Share

What is the fuel consumption of the old Camry?

The fuel consumption of the old Camry mainly depends on the engine displacement, with an average fuel consumption of about 5.3-10.1l/100km. Overall, the fuel consumption is relatively good, but it is also related to various factors, so the specific fuel consumption should be determined based on actual usage. Reasons affecting fuel consumption: 1. Excessive carbon deposits in the engine: Short-term excessive carbon deposits in the engine are mainly caused by using unsuitable engine oil. This situation is more likely to occur after long-distance driving or when the vehicle is lent to others; 2. Idling without turning off the engine or frequent ignition: When encountering long waiting times without moving the vehicle, it is recommended to turn off the engine; 3. Long time without replacing the three filters: During vehicle use, the three filters (oil filter, air filter, and fuel filter) must be replaced regularly. If they are not replaced for a long time, they will become dirty and affect performance.
109
Share

What are the hidden functions of the Geely Vision X3 remote key?

Geely Vision X3 remote key has hidden functions such as opening/closing car doors and remotely unlocking the trunk. Below are detailed explanations about the Geely Vision X3 car remote key: 1. Overview: The car remote key utilizes the wireless remote control function of the central locking system, enabling users to remotely lock/unlock doors without inserting the key into the keyhole. Its advantages include the ability to remotely lock/unlock anytime anywhere, while also sensing the vehicle's location. 2. Components and classification: The car remote key system mainly consists of a transmitter and receiver. The transmitter is composed of a transmission switch, transmission antenna (keypad), integrated circuit, etc. Based on usage methods, it can be categorized into three types: active working mode, passive working mode, and coil induction mode.
117
Share

What is the wading depth of a Jetta?

In terms of safety, half a wheel is the limit; from an automotive construction perspective, as long as the intake nozzle isn't submerged, it's fine. Here are some extended details: 1. Safe wading line: Half a wheel. When water only reaches half of the wheel, which is just up to the car logo in the middle of the tire, it's safe to pass through the puddle. Because half a wheel is essentially the vehicle's minimum ground clearance, this is considered the safe wading line. 2. Warning wading line: Door frame. Although doors have sealing strips, some cars' sealing isn't particularly good, which can allow water to enter the vehicle interior, damaging floor mats and seats, and also making internal circuits highly susceptible to damage. 3. Dangerous wading line: Air intake. When water reaches the height of the air intake and the vehicle continues to move, water can flow back into the engine, causing the vehicle to stall and resulting in permanent engine damage.
107
Share

How to Remove Gum Stuck on a Car?

After manually scraping off the gum from the car, there may still be residue. Car owners can use a cleaner to remove it by following these steps: 1. Prepare a car paint cleaner that contains only cleaning agents. First, get a regular car paint cleaner, as long as it contains cleaning agents. 2. Then spray the cleaner on the car. Apply the cleaner to the area where the gum residue is on the car paint. 3. Let it sit. Allow the cleaner to sit for a while to fully dissolve the gum residue. 4. Wipe with a cloth. Use a cloth to wipe back and forth. 5. Afterwards, you will see that the gum residue has been completely removed.
102
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.