How many days can a temporary license plate be replaced with a formal one?

1 Answers
DelEliana
07/30/25 4:53am
Temporary license plates can be replaced within 15 days. Below is some related additional information: 1. Temporary license plates: A temporary vehicle license plate is a provisional driving permit issued by the vehicle management department of the public security bureau when a car has not yet been officially registered due to pending procedures. According to the "Road Traffic Safety Law of the People's Republic of China," it is explicitly stated that vehicles must display license plates as required when driven on roads, and failure to do so will result in penalties. However, before obtaining formal license plates, it is mandatory to apply for temporary vehicle license plates in accordance with regulations to legally drive on roads. 2. Proper display of temporary license plates: Vehicle owners should promptly apply for formal license plates from the vehicle management authority. Two temporary license plates should be displayed simultaneously: one should be affixed to the lower left or right corner of the front windshield inside the vehicle, in a position that does not obstruct the driver's view, and the other should be affixed to the lower left corner of the rear windshield inside the vehicle. For other types of vehicles where installation conditions are limited, only one temporary license plate is required, but it must be affixed to the lower left or right corner of the front windshield inside the vehicle, in a position that does not obstruct the driver's view, to ensure driving safety.
Was this review help?
17
1
Share
More Forum Discussions

What does Subject 3 include?

Subject 3, the road driving skills test, generally includes the following components: pre-driving preparation, light simulation test, starting, driving straight, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, and meeting oncoming vehicles. More details about Subject 3 are as follows: Required documents: Users only need to bring their ID card for queuing and entering the examination area, and then for identity verification in the car. No other documents are required. Notes: During the test, follow the voice prompts to perform the operations. Pay special attention to the straight driving test item, where the vehicle speed is relatively high, making it easy to deviate from the direction. It is important to look far ahead and avoid gripping the steering wheel too tightly.
15
1
Share

Is the Power Difference Between Mazda6 Atenza 2.0 and 2.5 Significant?

The Mazda6 Atenza 2.5L and 2.0L have minimal differences in fuel economy. Comparatively, the 2.5L version offers a more exhilarating driving experience than the 2.0L, showcasing the characteristics of a naturally aspirated engine with enhanced sporty performance. Specific differences are as follows: 1. Fuel Consumption Difference: Different engines have their own optimal efficiency RPM ranges. However, larger displacement engines with stronger power are less likely to reach ideal RPM during normal driving conditions. 2. Exterior Differences: The entry-level 2.5L Mazda6 Atenza comes equipped with 19-inch wheels, which significantly enhance the vehicle's aesthetics, adding a finishing touch to its appearance.
6
5
Share

Is Wheel Balancing Necessary When Removing Tires?

Wheel balancing is required when removing tires alone, but not necessary when removing both tires and rims together. Below are specific details about wheel balancing: 1. Principle of Wheel Balancing: When a tire is removed separately, it cannot be reinstalled exactly according to the original marks. Since it is not installed according to the original marks, it will inevitably lead to uneven mass distribution, necessitating wheel balancing. Corresponding counterweights are added to the lighter areas to ensure uniform mass distribution, preventing dynamic imbalance when the wheel rotates at high speeds, which can cause wheel wobbling and steering wheel vibration during driving. 2. Wheel Balancing Operation: The process involves identifying the lightest point on the wheel and adding balancing weights at this location. The balancing weights are calibrated by mass; the weight chosen corresponds to the mass difference in grams at that point.
7
0
Share

How many days does it take to check vehicle violations?

Generally, it takes 3 to 7 days to check motor vehicle violations, and the latest should not exceed 13 working days. The following is the relevant introduction: Exceptions: There is a process from the occurrence of the violation to its entry into the online system, involving data collection, sorting, and review, as well as data entry and transmission. The exact time varies across the country and depends on the update speed of the local traffic management department. It usually takes within a week, but there are exceptions. General time: If it is a non-on-site violation (captured by cameras), it may take more than 15 days to check, and the time varies in different regions, but one week is more common.
4
4
Share

Why are used Roewe 550 cars so cheap?

Used Roewe 550 cars are cheap for the following reasons: 1, Roewe 550: The car itself is not expensive. 2, Engine: Its engine tuning technology is not advanced, and the engine response is slow. The sluggishness only improves after reaching a certain RPM. 3, Fuel consumption: The Roewe 550 has relatively high fuel consumption. Compared to other used cars, its engine performance is far inferior to that of a new car. Given that the new car already has high fuel consumption, the used Roewe 550's fuel consumption becomes even more of a burden. 4, Cost-effectiveness: Its cost-effectiveness is too low. In the long run, not only do maintenance costs increase significantly, but the high fuel consumption must also be considered.
9
4
Share

Where is the child safety lock located in a car?

Child locks are typically located in the window button area on the driver's side door or along the inner edge of the rear doors. Here are the details about child locks: How to use: When you need to activate the child safety lock, first open the rear door, gently move the small lever below the door lock in the direction of the child icon, and then close the door. Function: When the child safety device is in the locked state, the door can only be opened from the outside, and the interior door handle temporarily loses its function. Even if the central locking system is unlocked, the child safety lock remains engaged, allowing the door to be opened only from the outside. If you find that the rear door cannot be opened from the inside while it opens normally from the outside, check whether the child safety lock has been accidentally activated.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.