···
Log in / Register

How Many Cylinders Does the 2019 Buick Excelle Have?

6Answers
LeElena
07/23/2025, 06:20:56 PM

2019 Buick Excelle is equipped with a three-cylinder engine. The Buick Excelle is a compact sedan launched by Buick. In terms of power, this car is equipped with 1.0T and 1.3T turbocharged engines. Regarding body dimensions, the 2019 Buick Excelle has a length, width, and height of 4609mm, 1798mm, and 1486mm respectively, with a wheelbase of 2640mm. In terms of appearance, the 2019 Buick Excelle has a more prominent sense of fashion, with very powerful body lines, and the addition of a large number of chrome trim decorations makes this feeling more direct. Both the high and low beams of the Excelle use LED light sources, the tires are relatively wider, and it is equipped with a practical tire pressure monitoring function.

Was this review help?
108
Share
Lance
08/10/2025, 02:03:46 PM

As the owner of a 2019 Buick Excelle with the 1.3T three-cylinder engine version, I'm quite satisfied overall. The three-cylinder design makes it more fuel-efficient than older four-cylinder cars, with urban commuting fuel consumption around 6 liters per 100 km, saving me significant monthly fuel costs. There's slight vibration at startup, but it smooths out once driving - Buick has optimized it with balance shafts to reduce shake. I find this car ideal for daily commuting, with adequate space and no issues carrying family in the rear seats. My only suggestion is regular maintenance checks on engine mounts and ignition systems to prevent long-term loosening issues. The three-cylinder trend responds to environmental emission standards, and many current models adopt similar designs for good cost-performance.

Was this review help?
11
Share
Expand All
DiKarter
09/23/2025, 02:13:29 AM

From an automotive perspective, the 2019 Buick Excelle is equipped with a three-cylinder turbocharged engine, available in 1.0-liter and 1.3-liter options. The three-cylinder design reduces the number of components, making it lighter and more fuel-efficient, with an actual average fuel consumption below 7 liters. The power output is commendable during driving, with sufficient low-end torque, making city overtaking effortless. Vibration control is managed through modern technologies like sound-deadening materials and software tuning, though it may slightly shake during cold starts. For maintenance, it's recommended to change the oil on time and check the filters. While three-cylinder engines are cost-effective, long-term reliability should not be overlooked. This design aligns with energy-saving trends and meets current emission standards better than four-cylinder cars.

Was this review help?
20
Share
Expand All
Taylor
11/06/2025, 03:29:16 AM

When I used the 2019 Excelle, I found it was a three-cylinder car. The 1.0T version has low fuel consumption, making it a great money-saving helper. Driving on suburban roads cuts fuel costs in half, saving an average of 200 yuan per month. The lightweight three-cylinder structure provides quick acceleration, making daily commutes effortless. Although there is slight shaking at startup, adding a buffer pad solves the issue. It saves money without compromising environmental friendliness.

Was this review help?
13
Share
Expand All
LeEmma
12/27/2025, 10:26:19 PM

Our 2019 Buick Excelle is equipped with a three-cylinder engine, the 1.3T model provides a stable ride for the whole family. The spacious and comfortable seats with soft cushioning ensure kids aren't crowded in the back. The lightweight three-cylinder design offers quick brake response and high safety ratings. With lower fuel consumption saving nearly a thousand dollars annually, it's perfect for family budgets. Occasional slight engine vibrations don't affect comfort, and it's more economical compared to neighbors' four-cylinder cars.

Was this review help?
2
Share
Expand All
LeCole
03/25/2026, 01:34:01 AM

When maintaining the 2019 Excelle, it commonly uses a three-cylinder engine, which has a simplified structure and is easier to handle. Pay attention to vibration issues in daily use, and it is recommended to check the mounts and belts every 10,000 kilometers. The three-cylinder engine has low fuel consumption, fewer parts, and cheaper replacements, but it may be noisy during cold starts—use good engine oil to prevent this. Long-term reliability is not a problem, but avoid idling for too long as it can harm the engine.

Was this review help?
13
Share
Expand All
More Q&A

How to Check if the Engine Has Problems When Buying a Used Car?

Check the amount of dust in the engine compartment to initially assess wear and tear. However, pay special attention: if the engine compartment is spotless, it does not necessarily indicate less wear—it might have undergone major repairs. Look for any signs of oil leakage. Engine oil leakage could be due to excessively high engine temperatures in summer, which reduces sealing performance and leads to leaks. Inspect the oil level and color. If the oil level is too high, it indicates severe air leakage or water leakage in the engine.
118
Share

What is the actual fuel consumption of the Toyota RAV4?

Toyota RAV4's fuel consumption varies between 8.5L and 9.5L depending on the version. The actual fuel consumption of the RAV4 is 10.1 liters per 100 kilometers. More details about the RAV4 are as follows: 1. Vehicle data: The RAV4 is a compact SUV under Toyota. The body dimensions are: length 4600mm, width 1855mm, height 1680mm. The wheelbase is 2690mm. 2. Engine: This car uses two engines, one is a 2.0-liter naturally aspirated engine, and the other is a 2.5-liter naturally aspirated engine. The RAV4's 2.0-liter naturally aspirated engine has a maximum power of 171 horsepower and a maximum torque of 209 Nm. This engine can output maximum power at 6600 rpm and maximum torque at 4400 to 5000 rpm. This engine is equipped with hybrid injection technology and uses an aluminum alloy cylinder head and block. It is matched with a CVT transmission. The 2.5-liter naturally aspirated engine has a maximum power of 178 horsepower and a maximum torque of 221 Nm. This engine can output maximum power at 5700 rpm and maximum torque at 3600 to 5200 rpm. This engine is also equipped with hybrid injection technology and uses an aluminum alloy cylinder head and block. 3. Suspension: The RAV4's front suspension uses a MacPherson independent suspension, and the rear suspension uses an E-type multi-link independent suspension. The E-type multi-link independent suspension can improve the car's handling and ride comfort.
114
Share

How to File an Insurance Claim After a Motorcycle Accident?

First, in the case of personal injury compensation arising from a traffic accident, it is essential to have an accident liability determination issued by the traffic police department, which serves as the basis for all compensation liabilities. The primary scope of compensation is established based on the disability level assessment, which is conducted by a specialized evaluation agency. After the disability level is confirmed, various compensation liabilities are determined according to the local average salary of employees from the previous year, as well as the victim's age and household registration status. For personal injuries or fatalities caused by traffic accidents, hiring a lawyer is an option, and the lawyer's fees will also be borne by the losing party in the future.
103
Share

How to Adjust the Left and Right Rearview Mirrors for an Automatic Transmission Car?

First, locate the rearview mirror adjustment button on the left side of the steering wheel. The 'L' represents the left rearview mirror, and 'R' represents the right rearview mirror. Next, start adjusting the rearview mirrors. Taking the left rearview mirror as an example, first move the center button to the left, then press the left and right buttons to adjust. Adjust the up and down angle of the mirror until the road surface in the middle occupies half of the mirror. The button above is for automatic folding of the rearview mirrors. Press it, and the left and right rearview mirrors will automatically fold and retract.
111
Share

How to Check the Mailing Status of a Driver's License?

Methods to check the mailing status of a driver's license are: 1. Track using the mailing tracking number. Most courier companies provide online tracking services where you can enter the tracking number to check detailed logistics information. 2. Visit the official website of the local vehicle management office. Some cities offer an online driver's license status query service, allowing you to log in with personal information to check the status of your driver's license. 3. Use the driver's license status query feature in the city services section of WeChat on your mobile phone. This service is available in some cities, and you can locate your own city for the query. Additional Information: 1. The full name of a driver's license is the Motor Vehicle Driver's License, also known as a "driving license," which is a required certification for motor vehicle drivers as per the law. 2. After passing the examination, the vehicle management office or its branches will issue the Motor Vehicle Driver's License within five working days.
115
Share

At what tire pressure is it unsafe to drive?

Tire pressure below 1.7 bar is unsafe for driving. Below is relevant information about tire pressure: Tire pressure reference location: Open the fuel filler cap, where you'll find a standard tire pressure chart for your vehicle model. The most suitable tire pressure is the one indicated on this chart. If there's no chart at the fuel filler cap, check the door pillars by opening all four doors - the recommended values are usually marked there. Tire pressure range: It's normal for tire pressure to increase by 0.1-0.2 bar after the tires warm up. As long as the pressure difference remains within 0.1-0.2 bar, it's acceptable. The recommended tire pressure should follow the manufacturer's specifications. You can typically find these recommended values in: the vehicle owner's manual, the label near the driver's door (B-pillar area), the drawer next to the driver's seat, or on the fuel tank cap. For accurate cold tire pressure measurement, either wait at least three hours after parking or ensure the tires haven't been driven more than 2 km. If you must measure tire pressure when the tires are warm, subtract approximately 0.3 bar (=4 psi) from the measured value to get the cold inflation pressure. The minimum should not be lower than the recommended value for half-load conditions, and the maximum should not exceed the recommended value for full-load conditions. Within this range, you can adjust as needed. Regarding standard tire pressure, it's typically around 2.5 bar with a fluctuation of ±0.2 bar - slightly lower in summer and slightly higher in winter.
109
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.