···
Log in / Register

How Many Chances Are There for the Subject 2 Test?

6Answers
ORobert
07/29/2025, 11:29:17 AM

For the Subject 2 test, if you fail the first attempt, you are allowed one retake. If you do not attend the retake or fail the retake, the current test session ends, and the applicant must reschedule the test after ten days. Within the validity period of the driving skill test permit, the number of rescheduled attempts for Subject 2 and Subject 3 road driving skill tests cannot exceed five. If the fifth rescheduled test is still failed, the passing scores of other previously passed subjects will be invalidated. The full score for Subject 2 is 100 points, with evaluation criteria set for failing, deducting 20 points, deducting 10 points, and deducting 5 points. The test is considered passed if the following conditions are met: ① For applicants of large buses, trailers, city buses, medium buses, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required. The test items for large vehicles (A1, A2, A3, B1, B2) include pole test, hill start, parallel parking, single-plank bridge, curve driving, right-angle turn, narrow gate passage, continuous obstacle course, bumpy road driving, narrow road U-turn, and simulations for highways, continuous sharp mountain turns, tunnels, rain (fog) conditions, slippery roads, and emergency handling. The test items for small vehicles (C1, C2) include reverse parking, parallel parking, hill start (canceled for C2), right-angle turn, and curve driving (commonly known as S-turn), which are the five mandatory items (some regions include a sixth item for highway toll card collection).

Was this review help?
105
Share
ReaganLee
08/14/2025, 04:59:26 AM

I heard that for the Subject 2 driving test, you have a maximum of 5 attempts, and each one is a precious opportunity—don't waste it lightly. Failing the first time is normal; tricky spots like reverse parking can trip you up. On the second try, adjust your mindset and relax a bit. From the third to the fifth attempt, give it your all. If you fail all 5 times, well, you'll have to start over from Subject 1, which is both costly and time-consuming. So, practice driving more often, familiarize yourself with every corner of the test site, and focus on difficult maneuvers like parallel parking during mock exams. Mindset is also crucial—being too nervous can hurt your performance, so take deep breaths and calm down. The opportunities are right in front of you; planning wisely can help you pass smoothly.

Was this review help?
4
Share
Expand All
VanAurora
10/11/2025, 10:05:26 PM

I just passed the second driving test after three attempts. I was too nervous the first time and didn't reverse properly, made another mistake on the second try, but relaxed on the third attempt and passed. The standard rule is five test attempts per person, with a few days' interval between each. If you fail, you just need to reschedule. If you don't pass in five attempts, it's really tough—you have to start over from the first test. It's advisable to do a few simulations at the driving school before the test and discuss experiences with friends. Don't panic; there are plenty of opportunities, and you can succeed by taking it step by step. The key is not to put too much pressure on yourself and treat each attempt as a chance to improve. Treat failures as experience accumulation, and don't waste any attempt.

Was this review help?
1
Share
Expand All
VonHarley
11/24/2025, 10:08:48 PM

The driving test for Subject 2 usually gives you 5 attempts. I know many people pass on their first try, while some friends succeed only after three or four attempts. If you fail all attempts, you must restart from Subject 1. This rule is quite reasonable, giving examinees enough opportunities to adjust their mindset. Practice driving more often to get the feel, and get enough sleep before the test to stay sharp. Don't stress too much about the number of attempts—focus on mastering skills like hill starts. More chances don't mean you can slack off; take each test seriously to pass as soon as possible. Stay relaxed, and it'll get easier with practice.

Was this review help?
11
Share
Expand All
DeDiana
01/14/2026, 11:40:55 PM

I believe there are 5 attempts for the Subject 2 driving test, and candidates should plan wisely: use the first two tries to gauge the test feel and identify weaknesses; optimize strategies during the third attempt, focusing on challenging sections like parallel parking; and utilize the last two attempts for final refinements. After each failure, analyze mistakes to avoid repeating them. Retaking the test may incur additional costs ranging from 200-300 yuan, so don’t overlook preparation expenses. Failing all 5 attempts means reapplying for Subject 1, which is time-consuming and labor-intensive. Visit the test site in advance to familiarize yourself with the environment and watch video tutorials to enhance training. Strategically utilizing each attempt can significantly improve pass rates—don’t waste any test opportunity recklessly.

Was this review help?
10
Share
Expand All
VonHarmony
04/11/2026, 02:25:10 AM

According to the driving test regulations, the subject 2 test usually allows a maximum of 5 attempts, with each attempt permitting a limited number of item retries (such as reversing twice). However, the overall test limit is capped at 5 attempts. After failing 5 times, you must re-register and start from subject 1. There may be slight regional variations, such as certain cities allowing additional attempts or different interval rules. I recommend checking the local DMV website before the test to confirm the details. During preparation, it's essential to practice basic skills like starting and parking thoroughly—don't underestimate the test just because there are multiple attempts. Safety comes first, and maintaining a stable mindset will help you seize each opportunity to pass smoothly.

Was this review help?
1
Share
Expand All
More Q&A

How to Completely Power Off a Car?

To completely power off a car, use a wrench to disconnect the wires at both ends of the battery. Before disconnecting, wear protective goggles and gloves, and locate the positive and negative terminals of the battery, usually marked with a plus (+) and minus (-) sign. Methods to check if the battery has power include: 1. Inspect the battery's charge indicator; 2. Measure the battery's static voltage; 3. Check the battery fault light; 4. Observe if the dashboard flickers or dims when starting the car; 5. Look for signs of battery swelling, deformation, oxidation, or leakage. The functions of the battery are: 1. Powering the engine starting system, ignition system, and car electronics; 2. Supplying power to car electrical devices when the engine is off or at low idle; 3. Assisting in power supply when electrical demand exceeds the generator's capacity; 4. Acting as a voltage stabilizer for the entire electrical system, mitigating voltage spikes and protecting the car's electronic devices.
109
Share

What Are the Functions of Automotive Fuel Additives?

Automotive fuel additives serve the following purposes: 1. Remove carbon deposits and clean the fuel system; 2. Enhance engine performance; 3. Improve atomization and increase thermal efficiency; 4. Provide anti-corrosion, anti-rust, and lubrication protection for the engine; 5. Reduce noise and wear, extending engine lifespan; 6. Eliminate black smoke and lower emissions. The method for adding fuel additives is as follows: 1. Before adding the fuel additive, check the fuel level in the tank—only add the additive when refueling is needed; 2. Park the car near the fuel pump and open the fuel cap; 3. Open the fuel additive bottle cap and pour it into the fuel tank; 4. Fill the tank with gasoline to help disperse and mix the additive with the fuel.
120
Share

What are the precautions for car interior cleaning?

Precautions for car interior cleaning are: 1. For cleaning fabric parts, do not use a brush to scrub. Simply spray foam, wait for one minute, and then wipe clean; 2. When cleaning the dashboard, be careful not to spray too much foam at once. Use a soft-bristle brush to clean the sprayed areas; 3. Do not mix interior cleaning products; 4. For leather parts, use leather cleaner and polish or foam cleaner; 5. For plastic parts, spray foam directly, then scrub with a brush and wipe clean with a damp cloth; 6. For dashboard parts with leather or piano lacquer finishes, avoid applying too much force when using a soft-bristle brush to prevent scratching the interior.
114
Share

Should Car Heating Use Internal or External Air Circulation?

Whether to use internal or external air circulation for car heating depends on different situations: 1. Use internal circulation for short-distance driving; 2. Use external circulation for long-distance driving. Internal and external circulation respectively refer to: 1. Internal circulation means the air conditioning system is closed to outside air and can only circulate the air inside the car cabin; 2. External circulation means the car air conditioning system is open to outside air and draws in outdoor air for circulation. The method to turn on the heating is: 1. Locate the air conditioning control buttons at the display position in the cockpit; 2. Click the off button on the air conditioning control panel to activate the vehicle's air conditioning; 3. Press the air conditioning button to turn off the car's cooling function; 4. Rotate the temperature setting knob to the desired temperature to activate the heating.
111
Share

What to Do When a Car Drives Through Water

When a car drives through water, you should: 1. Stay calm and turn off the ignition; 2. Disconnect the negative terminal of the battery to prevent short circuits in the vehicle's electrical components due to water ingress; 3. Move the vehicle to a safe location; 4. Check if water has entered the engine cylinders; 5. Inspect the condition of various fluid systems in the vehicle; 6. Clean the fuse box, sensor connectors, and areas where water has accumulated in the body. The potential impacts of driving through water include: 1. Reduced engine power and shaking issues; 2. Moisture or water ingress causing short circuits in the high-voltage distribution system; 3. Water entering the exhaust pipe; 4. Residual water preventing full friction between brake discs and pads, leading to loss of braking power; 5. Debris easily sticking to chassis gaps, causing rust; 6. Fog forming inside headlights, affecting light transmission; 7. Wet wiring harnesses and circuit interfaces in the engine compartment causing short circuits.
116
Share

Should Car Film Be Applied on the Outside or Inside?

Car film is applied on the inside. The functions of the film are: 1. It can provide heat insulation in summer, saving air conditioning energy; 2. It can reduce energy loss in winter, maintaining the interior temperature; 3. It blocks ultraviolet rays, preventing direct exposure to the interior decor, thereby extending its lifespan and quality; 4. It reduces glare, ensuring safe and comfortable driving. Precautions after applying the film include: 1. Avoid rolling down the windows within three days; 2. Do not clean the heat-insulating film or turn on the defogging heating wires within one week; 3. Avoid using nails or sharp objects to lift the edges of the film to prevent dirt from entering; 4. Do not attach suction cup items to the car film for one to two weeks; 5. If bubbles, displacement, or blurred vision occur on the film surface, seek professional assistance promptly to avoid affecting driving safety.
113
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.