···
Log in / Register

How long after passing Xi'an Subject 3 can you schedule Subject 4?

6Answers
LeHazel
09/08/2025, 03:53:49 AM

Theoretically, you can immediately schedule Subject 4 after passing Subject 3. Article 31 of the regulations states that the vehicle management office shall accept applications from those who meet the requirements for a driver's license and arrange exams according to the scheduled date. Below is relevant information about the driving test: Exam sequence: The exams must be taken in the order of Subject 1, Subject 2, and Subject 3. Only after passing the previous subject can you proceed to the next. After passing the Subject 3 road driving skills test, you are eligible to take the safety and civilized driving knowledge test. Reasons why you cannot take Subject 4 immediately after Subject 3: Due to the high number of test-takers in the examination center, including those who have passed, those who have failed, and those undergoing simulation training, the staff are very busy. Each person is only allowed to take one test per day, and it is not possible to take two tests consecutively. The staff also need to print score reports and upload results online.

Was this review help?
108
Share
RubyLee
09/20/2025, 02:20:43 AM

In Xi'an, after passing the third subject of the driving test, scheduling the fourth subject is usually quick, as was my case. Around 11 a.m. on the day of the exam, feeling relaxed, I immediately checked the scheduling status on the Traffic Management 12123 app. Luckily, there were two available slots for that afternoon, and I booked the 3 p.m. session. However, I heard that if there are many people, like at the Xiaozhai or High-Tech Zone test centers, you might have to wait half a day or a full day—just refresh the app a few times. My advice is not to delay; check the app right after the exam, and you can usually schedule within an hour or two. The fourth subject isn’t hard but has a large question pool. I used the Driving Test Prep app to practice whenever I had time—familiarizing yourself with the rules will help you pass. Remember to bring your original ID and payment receipt to avoid delays. Overall, the process is smooth; just stay confident.

Was this review help?
9
Share
Expand All
MacSavannah
11/03/2025, 01:42:01 AM

In the Xi'an area, the process of scheduling the Subject 4 test after passing Subject 3 is quite fast. I usually use the official 12123 APP for operations. After completing the test, I log directly into the scheduling module, which updates in real-time. Most of the time, there are slots available on the same day or the next day. Don’t wait until the next day to check, as you might miss your preferred time slot during peak hours. If you can’t schedule it immediately, don’t worry—the system refreshes every half hour. Try again in the afternoon or evening, and you’ll definitely find a slot. It’s advisable to choose a nearby test center in advance, such as the North Passenger Station, to save travel time. Also, don’t neglect your Subject 4 review—download a practice app and go through the questions a few times a day; all the knowledge points are available on your phone. Overall, the experience is good, and with a bit of patience, everything will go smoothly.

Was this review help?
8
Share
Expand All
IkerLynn
12/17/2025, 01:42:08 AM

After passing Subject 3 in Xi'an, you can directly book Subject 4, but the timing isn't fixed. Generally, it can be scheduled immediately or take up to half a day at most. I personally tested it—clicking the booking button on the app brings up a list of available slots, and you can pick any open slot, but act fast without hesitation. Busy test centers like Qujiang might schedule you for the next day, but it's no big deal—just keep an eye on system updates. Use this time to review Subject 4 questions thoroughly, and you'll find it easy to pass.

Was this review help?
20
Share
Expand All
OZoey
02/06/2026, 02:32:31 AM

I took the driving test in Xi'an last year. After finishing Subject 3, I was eager to schedule Subject 4 and found out that the APP allows real-time operations. At noon after the exam, I opened the 12123 app, clicked on the Subject 4 scheduling section, and saw available slots even for that evening. It was super convenient to select one directly. During holidays or exam seasons, there might be a delay of about a day, but a quick refresh on the APP solves it. For Subject 4 review, I recommend using the 'Driving Test Guide' for online practice to familiarize yourself with the rules. Remember to schedule your time and bring your documents—stay relaxed and don’t stress yourself. The whole process in Xi'an is efficient and quick, just make sure not to miss any scheduling steps.

Was this review help?
9
Share
Expand All
VonBriella
05/01/2026, 06:10:14 PM

In Xi'an, it's quite user-friendly that you can immediately schedule the fourth subject (Subject IV) after passing Subject III in the driver's license test. I always use the 12123 APP to book the test. Right after completing the test, I log in to select a time slot, and usually, there are vacancies available on the same day, such as morning or afternoon sessions. If slots are full, just refresh later as the system automatically adds more. It's also advisable to prepare a test-prep APP for Subject IV, as the questions are based on common traffic regulations and can be memorized quickly. Once you've booked a time, arrive at the test center half an hour early with your ID card to avoid any mishaps. Overall, Xi'an's test scheduling system is reliable—just keep up with it promptly, and it's not complicated at all.

Was this review help?
14
Share
Expand All
More Q&A

Where is the motor vehicle QR code located on the Baojun 560?

The motor vehicle QR code for the Baojun 560 is located at the lower left corner of the front windshield outside the vehicle. Motor Vehicle QR Code: The motor vehicle QR code contains license identification information such as the issuing authority, unique serial number, license plate number, as well as the vehicle's technical parameters and owner information. It can only be scanned by specialized systems used internally by traffic police. Specific applications of QR codes in vehicle management: Vehicle management involves the administration of vehicle information, safety, inspections, and approval content. As a means of transportation, vehicles and their drivers are constantly in dynamic motion through time and space. QR Code: As a simple, economical, and practical information carrier, QR codes enable management authorities to monitor dynamic objects in real-time and track their trajectories, achieving networked and automated management processes.
113
Share

What are the causes of increased axial displacement in steam turbines?

The main causes of increased axial displacement in steam turbines include: (1) Decrease in steam temperature and pressure, overload in the flow passage, and shutdown of regenerative heaters; (2) Increased steam leakage due to wear in the diaphragm shaft seal clearance; (3) Poor steam quality leading to scaling in the flow passage; (4) Water hammer occurrence; (5) Load variations. Generally, the axial thrust of condensing steam turbines increases with load; for extraction or back-pressure turbines, the maximum axial thrust may occur at a certain intermediate load. (6) Damage to thrust bearings; (7) Drop in condenser vacuum; (8) Decrease in grid frequency. Key points for handling increased axial displacement: (1) When increased axial displacement is detected, pay special attention to the temperature of thrust bearing pads and their return oil temperature, monitor turbine vibration, and listen for any abnormal sounds inside the turbine. (2) If axial displacement increases to the alarm value (+1, -1.45 mm), quickly reduce the load to bring it below the alarm value, report to the shift leader to identify the cause and take action, and keep a record. (3) If axial displacement increases to the trip value (+1.2, -1.65 mm) and the protection does not activate, and the thrust bearing pad temperature rises to 95°C, perform an emergency shutdown. (4) If axial displacement increases significantly, vibration rises notably, and bearing return oil temperature increases sharply to 75°C, perform an emergency shutdown. (5) Even if axial displacement has not reached the limit value, but thrust bearing temperature rises significantly and any thrust pad temperature reaches 95°C, and load reduction does not resolve the issue, perform a fault shutdown.
114
Share

What do the three modes of Haval H6 represent?

Haval H6 offers three fuel consumption modes: Standard/Comfort Mode, Eco Mode, and Sport Mode. The meanings of the three modes are as follows: Standard Mode: Balances vehicle power and fuel efficiency, suitable for various road conditions. The vehicle defaults to Standard Mode upon engine start. Repeatedly pressing the drive select button allows switching between Standard Mode, Sport Mode, and Eco Mode. Sport Mode: Enhances vehicle driving dynamics, suitable for open and flat roads with less traffic. Eco Mode: Improves vehicle fuel economy, suitable for urban roads, paved roads, and other flat and hard surfaces.
111
Share

What are the specifications for the 16-inch wheels of the Volkswagen Touran?

The specifications for the 16-inch wheels of the Volkswagen Touran are: bolt pattern 5X112, ET46, center bore 57.1mm, and size 16X6.5J. Car wheel maintenance methods: Cleaning: The wheel hub is the central part of the wheel where the axle is installed, commonly referred to as the "rim" or "steel rim." The surface of the wheel hub is particularly prone to accumulating soil particles or dirt. When these are noticed on the wheel hub, they must be cleaned promptly to prevent corrosion of the alloy. Waxing: It is recommended to apply a coat of wax to the wheel hub every two months. Use an acid-resistant cleaner to thoroughly clean both the inside and outside of the wheel hub. The ingredients in the cleaner can effectively remove dirt and reduce damage to the alloy.
115
Share

What documents are required for taking the Subject 4 driving test in another city?

To apply for taking the Subject 4 driving test in a different location, simply bring your ID card to the local vehicle management office at your current residence to complete the exam location change procedure. There's no need to return to the original test location or submit additional documents such as residence permits or temporary residence certificates. Please note that you only have one opportunity to change your exam location, and all remaining subject tests as well as license collection must be completed in the new city. For applicants of C1, C2, or C5 driver's licenses, the Subject 4 test can be taken in a different location. Since June 2019, the Ministry of Public Security has implemented cross-regional subject testing for small vehicle driver's licenses under the "National Unified Examination" policy. This means if you initially registered at a driving school in your hometown and passed some tests but need to relocate due to work, study, or other personal reasons, you can apply to change your test location. After changing the test location, your passed subject scores remain valid. You can simply schedule the remaining subject tests at your current residence. Once all subjects are passed, you can obtain your driver's license in your current city of residence. If you haven't taken Subject 2 or Subject 3 yet, generally you'll need to affiliate with a local driving school when transferring to another location, as there are now mandatory training hour requirements. Without meeting these requirements, you won't be able to schedule the tests. If only Subject 4 remains, typically the vehicle management office will arrange for you to take the test at a designated location. However, some regions might still require affiliation with a driving school or charge additional fees for non-local examinees, so it's best to consult with the local vehicle management office for specific requirements.
103
Share

How to Remove Moisture from Headlights?

Here are the main methods to remove moisture from car headlights: 1. If the moisture inside the headlight is not too severe, you can purchase a desiccant and place it inside. 2. The most common reason for moisture inside headlights is the aging of the headlight sealing gasket or damage to the headlight caused by a collision in the nearby area, allowing water to enter and produce steam when heated. In this case, you should promptly visit a repair shop to have professionals remove and repair the headlight. Below are the main reasons for moisture in car headlights: 1. Previous headlight modifications, where the headlight was not tightly reinstalled after removal, allowing water to seep in from the sealing gasket. 2. A collision occurred in the headlight area, causing cracks in the headlight or body deformation that affects the headlight's sealing, resulting in gaps. 3. Issues with the rubber sealing gasket in areas such as the dust cover behind the headlight.
105
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.