···
Log in / Register

How long after getting a new driver's license can you drive on the highway?

6Answers
VanZoey
08/31/2025, 12:00:51 AM

Generally, drivers can drive on the highway after completing a one-year probationary period following the issuance of their driver's license. If the probationary period is extended by one year due to traffic violations, the total probationary period becomes two years. Below are some precautions for highway driving: Observe traffic rules: New drivers should pay attention to traffic regulations and display a probationary sign. Highway speed limits: Before entering the highway, inspect the vehicle. The minimum speed on the highway should not be less than 60 km/h, and the maximum speed should not exceed 120 km/h. Merge in advance: When exiting the highway, merge to the outermost lane in advance upon seeing roadside signs indicating 1.5 km or 1 km remaining. Maintain distance: Maintaining a safe distance is the most critical factor for safe driving. Many inexperienced drivers misjudge distances, follow too closely, and may not have enough time to brake.

Was this review help?
109
Share
SanLane
09/12/2025, 03:21:22 AM

Newly obtained driver's licenses come with a probationary period, typically lasting 12 months. During this time, you cannot drive on highways alone; you must have an experienced driver with over 3 years of driving experience sitting in the passenger seat to accompany you. This is because new drivers lack experience, and the high speeds on highways can easily lead to accidents. When I first got my license, I was also excited and wanted to drive on the highway, but after checking the regulations, I realized I couldn’t be reckless. For now, I’m practicing in urban and suburban areas to get familiar with turning, reversing, and emergency braking. I’ll wait until the probationary period is over before attempting long-distance driving. Also, remember to display the probationary sign on the rear of your car to remind others to give you some space. Related: The main purpose of the probationary period is to help new drivers develop safe driving habits—don’t overlook it. Before driving on the highway, check your tire pressure and lights, and if you feel fatigued, pull over to rest immediately.

Was this review help?
9
Share
Expand All
LaEmmanuel
10/26/2025, 04:10:13 AM

As a seasoned driver with over a decade of experience, I advise new license holders not to rush onto highways. There's a 12-month probationary period, during which driving on highways requires a reliable mentor with at least 3 years of driving experience. Novices tend to get nervous on highways, struggle with maintaining proper following distances, or may panic in sudden dangerous situations, leading to improper handling and potential hazards. I've personally witnessed many accidents involving drivers during their probationary period, so it's best to spend a few more months practicing in the city first. After the probationary period, driving independently on highways is fine, but it's essential to develop habits like checking brake fluid levels and mirror angles. Related: Displaying a probationary sign reminds following vehicles to maintain a safe distance, and extra caution with speed is crucial when driving at night.

Was this review help?
1
Share
Expand All
McLily
12/09/2025, 03:29:53 AM

In my daily interactions, I've noticed that friends who just got their driver's licenses often ask about this. According to regulations, new drivers have a 12-month probationary period. During this period, driving on highways requires accompaniment by a licensed driver who has held their license for at least 3 years. After the probationary period ends, you can drive on highways independently. It's recommended for beginners to practice more on urban roads to familiarize themselves with road signs and traffic light controls, and not to take risks for speed. Related: Don't forget to display the probationary sign clearly so others can easily identify you as a novice. Safety first, take it slow.

Was this review help?
9
Share
Expand All
Galadriel
01/29/2026, 09:48:58 PM

Parents inevitably worry when their kids get their new driver's licenses. From my experience, during the 12-month probationary period, driving on highways requires an experienced driver with at least 3 years of license tenure in the passenger seat. Otherwise, getting caught will result in point deductions and fines. After 12 months, even when driving independently on highways, it's crucial to enhance safety awareness. Novices are prone to mistakes on highways due to lack of experience, so maintaining stable speed and focus is key. Related: Displaying the probationary sign isn't just a regulation—it also protects you. Always remember to fasten your seatbelt and stay vigilant about road conditions.

Was this review help?
7
Share
Expand All
SophiaRose
04/24/2026, 04:02:30 PM

I have researched topics related to cars. The probationary period for a new driver's license is set at 12 months, meaning you cannot drive on highways alone during this time and must be accompanied by someone whose license has been valid for at least 3 years. The probationary period automatically ends after this time, but it's best for beginners to practice on regular roads for a few weeks to get comfortable. Related: It's important to understand the specific regional rules, as some cities have nighttime restrictions. Display a probationary sign on your car, develop the habit of checking your vehicle's condition, and take frequent breaks during long drives to prevent fatigue.

Was this review help?
18
Share
Expand All
More Q&A

How to Solve the Jerking Issue in the 8th Generation Civic?

The solutions for jerking in the 8th Generation Civic are as follows: 1. Upshift Jerking: This is mostly caused by the transmission's response speed not being fast enough, where the upshift speed cannot keep up with the throttle input. Therefore, there is a jerking sensation at the moment the transmission shifts gears. It is recommended to avoid sudden acceleration. 2. Downshift Jerking: This is mostly due to the intervention of the energy recovery system. Once the driver releases the throttle pedal or steps on the brake pedal, the generator immediately starts working, which puts some load on the engine, affecting the engine speed and causing it to be out of sync with the clutch plate speed, resulting in a jerking sensation. It is recommended to avoid sudden braking.
119
Share

What is the toe-in for the Cruze?

The toe-in for the Cruze is between -0.5~2.5mm. Below is a related introduction to the Cruze: 1. Power: The Chevrolet Cruze is equipped with a 1.5L inline 4-cylinder naturally aspirated engine, with a maximum horsepower of 114Ps. 2. Dimensions: The vehicle height is 1460mm, width is 1807mm, and the wheelbase length is 2700mm. 3. Fuel consumption: The combined fuel consumption is 8.6L/100km, with highway fuel consumption at 7.2L and urban driving fuel consumption at 11.2L.
118
Share

What are the reasons for abnormal noise after the Lamando is turned off?

There are three main reasons for abnormal noise after the Lamando is turned off. Below is a detailed introduction to these three reasons: 1. Uneven engine cooling: After the car has been driven for a period of time, the engine temperature is very high. After turning off the engine, the temperature of various components decreases, and thermal expansion and contraction cannot occur at a completely uniform rate. This inevitably leads to gaps between the internal metal components of the engine, causing friction and abnormal noise due to cooling contraction. 2. Cooling noise from the exhaust pipe: Generally, the temperature of the exhaust pipe during cold idle is around 200°C. When the car is under high load or when there is combustion of the air-fuel mixture in the exhaust pipe, the temperature will be even higher. Therefore, the exhaust pipe will also produce abnormal noise due to thermal expansion and contraction. 3. Cooling noise from the three-way catalytic converter: The normal operating temperature of the three-way catalytic converter is between 400-800°C. After turning off the engine, its operation gradually stops, and the temperature decreases. The internal metal components will then undergo thermal expansion and contraction, resulting in abnormal noise.
103
Share

What to do if the belt tensioner of Audi A6L 2.8 is misaligned?

Audi A6L 2.8 belt tensioner misalignment requires replacement of the tensioner or idler pulley. The following is an introduction to the relevant content: 1. Car maintenance: The belt is one of the more important items and is also easily forgotten. Once the belt breaks, it may cause delays at best or damage the vehicle and pose a danger at worst. 2. Replacement time: A car has two belts, the timing belt and the accessory belt. The replacement cycle of the timing belt is almost the same for all cars, approximately every three years or 60,000 kilometers. 3. Simultaneous replacement: The tensioner and idler pulley need to be replaced at the same time. Because the lifespan of the belt and the tensioner is almost the same. If the timing belt does not show abnormal wear, it is not visible from the outside whether it needs to be replaced. In addition, the belt is covered by a shield and cannot be seen from the outside.
108
Share

Is Tiptronic the Same as AMT?

Tiptronic is AMT. Below is relevant information about AMT: The differences between AT, AMT, and EMT are: different references, different operations, and different shifting logics. 1. Different references. 1. AT: Automatic transmission. 2. AMT: Tiptronic. 3. EMT: Electronically controlled manual transmission. 2. Different operations. 1. AT: Automatically shifts gears in D mode. 2. AMT: D/M mode, allowing manual control of gear shifting. 3. EMT: Computer-controlled shift forks for gear changes. 3. Different shifting logics. 1. AT: Automatically controls the oil circuit based on engine speed, thereby controlling clutch engagement or disengagement. 2. AMT: Based on driver operation, pushing the gear lever to shift gears. 3. EMT: Based on engine speed, the circuit controls solenoid valves to operate the manual transmission for shifting.
112
Share

Is the Zero Interest on New Cars Really Interest-Free?

New car zero-interest offers are indeed interest-free. However, 4S dealerships will charge loan customers certain mortgage handling fees, and may even require prepaid insurance premiums while bundling car insurance for the next few years. Although there is a certain degree of discount on loan interest, the accumulated costs from other items mean that the actual amount paid isn’t significantly less, and in some cases, customers may even end up paying more. Additional Information: Differences Between Full Payment and Installment for Car Purchases: 1. Installment: Applying for a car loan through auto finance companies, banks, or other institutions, using the installment method to pay a down payment first and then repay the remaining amount monthly, allowing early access to the car. (1) Additional Insurance: For loan purchases, the commercial insurance portion is usually negotiated with the 4S store before purchase, requiring at least compulsory insurance, vehicle damage, third-party liability, and theft coverage. Discounts may be limited. (2) Renewal Deposit: Some 4S stores also require a renewal deposit, which is non-refundable if the customer does not renew the insurance with them the following year. (3) Certificate Pledge: For loan purchases, 4S stores typically hold the vehicle’s certificate until the loan is fully repaid. 2. Full Payment: Paying in full for a car involves fewer complications and issues, whereas loan purchases often come with additional dealer-added accessories or decorations.
114
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.