
After installing snow chains on a car, for safety reasons, the speed should not exceed 50 km/h. Below are some precautions for installing and using snow chains: Before installing snow chains, the driver should know whether the vehicle is front-wheel drive or rear-wheel drive, as the chains must be installed on the set of tires that play the primary role. For automatic transmission models, it is also important to note that snow chains should be installed on both front or rear wheels simultaneously. Additionally, snow chains come in sizes, so ensure to choose chains that match the size of your wheels. After installing snow chains, drive at a low speed as much as possible. The vehicle should maintain a slow driving speed after the chains are installed. Due to the special function of snow chains, avoid sudden acceleration and emergency braking while driving. Snow chains only serve as an auxiliary anti-slip measure, so do not overly on them. Do not assume that installing snow chains means everything is worry-free. In rain or snow conditions, drive cautiously and avoid sharp steering, sudden braking, or hard acceleration.

When I was younger and driving in the north during winter, I often installed snow chains. I remember once driving over 50 km/h in the snow—the chains were buzzing loudly and nearly snapped off, which really scared me. Manufacturers generally recommend not exceeding 30-50 km/h, as driving too fast causes excessive chain wear, potentially leading to breakage, tire damage, or even losing control and sliding off the road. I once tried driving faster, and the car shook violently. Later, I learned to use them only on deep snow sections, crawling along at 20-30 km/h to ensure safety. Don’t install them in summer, and always maintain the chains properly, ensuring they’re tightly fitted to avoid sudden accidents. A friend of mine drove too fast, resulting in vehicle damage and repairs costing several thousand yuan—a lesson learned.

Last heavy snowfall, I installed snow chains, and the car was much more stable on the snowy road, but the noise was quite annoying. The salesperson told me to keep the speed under control, around 40km/h is safer; going faster could cause the chains to fly off or wear the tires. I tried accelerating to 60km/h, and the car shook noticeably, so I quickly slowed down. Generally, maintaining a low speed is sufficient—no need to rush, especially when driving in the city. Winter driving should always be cautious; chains are just an aid, not a tool for speeding. My friend also reminded me to check if the chains are properly installed after each use to reduce safety risks.

As a car enthusiast, I've researched anti-skid chain types like metal chains and fabric chains. Metal chains have a lower speed limit, usually within 30km/h. They are designed for low-speed anti-skid purposes, as driving faster increases vibration and may damage tires or the chassis. It's recommended not to exceed 50km/h after installing the chains, with safe handling being the top priority. Improper installation can also cause imbalance, increasing risks. Avoid using them in summer to prevent road surface damage.

I drive to work every day and occasionally use snow chains in winter, moving slowly at 20-30 km/h in the city to avoid sudden braking. The manufacturer recommends a maximum speed of 50 km/h, which is too high as it causes loud noise and may even jam the wheels. When commuting, leave early to allow enough time. While snow chains are important for traction in snowy conditions, don't on them for speeding. It's advisable to check the tightness of the chains and remove them for maintenance after short-distance use.

In terms of safety awareness, I emphasize that speed must be strictly limited after installing snow chains, ideally within 30-40 km/h. If driven too fast, the chains can break due to excessive load, leading to accidents or loss of vehicle control. I've read reports of rollovers caused by speeding, so I always drive slowly and cautiously. Snow chains are only installed on snow-covered or icy road sections and should be removed immediately after use. Regular checks for proper installation help minimize potential hazards.


