···
Log in / Register

Does the Venucia T60 have an anti-collision beam?

3Answers
SebastianDella
08/30/2025, 02:41:13 AM

Venucia T60 has an anti-collision beam, which is a U-shaped channel stamped from cold-rolled steel plate and connected to the frame longitudinal beam. It serves to absorb and mitigate external impact forces, protecting the front and rear parts of the vehicle body. Taking the 2020 Venucia T60 Manual Zhiguan Edition as an example, it is a compact SUV under Dongfeng Nissan, with body dimensions of 4412mm in length, 1820mm in width, and 1679mm in height, a wheelbase of 2640mm, and a fuel tank capacity of 50 liters. The 2020 Venucia T60 Manual Zhiguan Edition is equipped with a 1.6L naturally aspirated engine, delivering a maximum power of 93 kilowatts at 5600 rpm, paired with a 5-speed manual transmission.

Was this review help?
117
Share
StAthena
09/11/2025, 11:44:09 PM

As an owner of the Venucia T60, I can personally confirm through my experience and research that it is equipped with front and rear anti-collision beams, which is a significant highlight in terms of safety. These beams, primarily installed at the front and rear of the vehicle, are made of high-strength steel and designed to absorb impact energy during collisions, minimizing damage to the chassis and passenger compartment. Having driven my Venucia for over a year, I experienced a minor rear-end collision where the beam only suffered slight deformation, preventing more severe damage. The Venucia T60, built on the Nissan platform, boasts reliable safety design and frequently receives positive reviews. However, relying solely on the beams isn't enough. Owners should also prioritize regular maintenance, such as checking for rust or looseness in the beams, as their effectiveness diminishes with aging. Safe driving habits, like maintaining appropriate speeds and wearing seatbelts, are equally crucial. Combining these measures effectively reduces risks. Prioritizing safety features when choosing a car is undoubtedly worthwhile.

Was this review help?
16
Share
Expand All
McElliot
05/09/2026, 06:38:39 AM

The Venucia T60 is indeed equipped with anti-collision beams, which are fundamental safety features. I usually advise friends to inspect them from a maintenance perspective, such as checking for cracks or rust on the beams during use, especially in older vehicles, as these signs can compromise protection. A simple glance at the undercarriage during regular car washes can suffice. Of course, the beams are just one aspect of safety; the braking system and tire pressure are equally crucial, and regular maintenance can prevent accidents. Based on my experience, the Venucia T60 is reliable in such designs, but developing good habits ensures long-term safety.

Was this review help?
12
Share
Expand All
More Q&A

How to Turn on the Cold Air in an Electric Car's Air Conditioning?

The car has buttons marked with blue and red colors. The blue part represents cold air, the red represents warm air, and the middle represents a moderate temperature. Adjust it to the blue part. The button with a white line on the left is the temperature adjustment button. If you feel too warm, adjust it to the middle. If not in use, set it to the fan symbol. The button on the far right controls the mode, which can be adjusted to blow air only to the feet, hands, or windshield. You can also use two modes simultaneously. The AC switch is marked with 'AC.' Some are integrated with the temperature adjustment buttons, while others are independent. After setting, press it to turn on.
106
Share

How Often Should the Coolant in a Mercedes-Benz E-Class Be Replaced?

The coolant in a Mercedes-Benz E-Class generally needs to be replaced every 2 years or 40,000 kilometers. This is just a reference interval. For commercial vehicles with higher mileage, the replacement interval should be shorter. Since driving conditions vary for each vehicle, the replacement should be based on actual usage. Check the coolant level regularly and top it up if it is low. If suspended particles, sediment, or discoloration are observed in the coolant, replace it immediately and clean the system. Coolant Replacement Method: Before a complete coolant replacement, conduct a thorough inspection to check for leaks or cracks in all pipes, with a focus on the five-way hose. The five-way hose, named for its five connecting interfaces, distributes coolant to different parts of the car. If any leakage is detected in this section, replace the hose or reseal the connections as needed. Drain the old coolant and flush the system with clean water. Add water to the coolant reservoir and continuously flush the engine cooling system. Then, start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the drained water may appear slightly pinkish. Continue flushing until the water runs clear. Remember to disconnect the heater hose and drain the water from the heater core. After draining for about an hour, add new coolant through the radiator hose to allow quick flow into the radiator. Then, fill the coolant reservoir with another bottle of coolant until it is nearly full. Run the engine for about 10 minutes. As air is purged from the cooling system, the coolant level will drop. Top up the coolant to the "MAXT" mark on the reservoir.
106
Share

How to Operate an Automatic Transmission Car Correctly?

Correct operation method for starting an automatic transmission car: 1. After sitting in the driver's seat, the driver does not need to press the brake pedal, just press the start button once to turn on the ACC indicator, then press it again to initiate the vehicle self-check (for models with one-button start function). 2. Depress the brake pedal and press the start button once more to ignite the engine; release the ignition switch immediately after the engine starts. Holding it down may cause gear grinding between the starter and engine flywheel, shortening the starter's lifespan. 3. Release the foot brake and allow the engine to warm up for 1-3 minutes. The instrument panel has a C-F coolant temperature gauge - when the pointer reaches the middle position, it indicates the coolant has reached 90°C, meaning warm-up is complete. 4. Depress the foot brake again, shift to D gear, and release the parking brake (for electronic parking brakes, simply press the button briefly). Before moving, check the vehicle surroundings carefully. Due to blind spots, use the horn and turn signals to alert nearby vehicles and pedestrians. 5. Gradually release the foot brake while gently applying throttle to complete the starting procedure.
118
Share

How to Tow a Car with Electronic Gear Shift?

First, check the car's battery level. If there is power, press and hold the power button for 10 seconds to unlock the gear shift when the vehicle is fully powered on. The N gear is the neutral position, allowing the car to be towed. Without pressing the brake, long-press the ignition button for a security check, then release the handbrake and shift to N gear. After completion, the engine needs to be turned off. Newer car models may have a mechanical gear shift button, usually located near the gear lever and labeled as SHIFT. Press and hold this button to shift into N gear. For older car models, remove the ashtray to reveal a small cover. Use a small flat-head screwdriver to pry it open, then press and hold downward to shift gears.
101
Share

What to Do When the Electric Oil Pump Fails to Pump Oil?

Check the oil level height. If the oil level is too low, promptly add the appropriate type of oil as required. Incorrect oil grade can cause the oil viscosity to be too high or too low. Select the appropriate oil grade according to the season. Generally, use higher-grade oil in summer and lower-grade oil in winter. If the added oil is unclean, it may clog the oil filter or suction pipe. Regularly clean the oil filter and pipelines, and ensure the added oil is filtered to maintain cleanliness. Check if the sealing ring at the oil suction port is damaged. Also, inspect the suction pipeline and self-tightening oil seal. If there is air leakage due to damage, take sealing measures or replace the sealing components.
114
Share

What to Do When the Battery Gets Wet?

If the battery gets wet, do not charge the electric vehicle. You must dry the battery thoroughly and check whether reconfiguration and electrolyte replenishment are needed. If there is significant water ingress, pour out and wipe dry all the water inside the battery. Then, clean it with distilled water or high-purity water, and add electrolyte to adjust the density. You can choose to use a qualified battery repair machine to directly repair the battery. If the battery is damaged beyond repair due to water ingress and cannot be used, you can only replace it with a new battery at a repair shop.
105
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.