···
Log in / Register

What Causes the Windshield Wiper to Make Noise?

6Answers
JoelLynn
07/28/2025, 06:36:53 PM

Reasons why windshield wipers make noise: 1. Foreign objects on the wiper: If there are foreign objects between the wiper blade and the windshield, it not only causes a squeaking noise when wiping the glass but also significantly affects the wiping effect, posing a potential safety hazard. Therefore, after driving through rough road conditions, it's best to check the wiper for any foreign objects and clean them promptly if found. 2. Quality of the wiper: Poor-quality wipers often have rubber components that lack good resistance. Under prolonged exposure to sunlight, they can easily harden (become rough), leading to squeaking noises during operation. In this case, simply sanding the blade smooth with sandpaper can resolve the issue. 3. Wiper angle: An incorrect angle can cause the wiper blade to jump on the windshield, resulting in noise. The owner can adjust the angle themselves. However, avoid applying too much downward pressure on the wiper, as this can accelerate windshield wear.

Was this review help?
109
Share
OwenAnn
08/11/2025, 10:01:45 PM

As someone who frequently handles vehicle maintenance, I find that the reasons for wiper blades squeaking on the windshield are quite common: the main cause is aging or deformation of the wiper blades. Over time, the rubber hardens, leading to uneven wiping and squeaking. If there is an oil film or dust stains on the glass surface, rainwater mixing with these contaminants creates friction points, amplifying the noise. Another reason could be improperly secured wiper arms or weakened springs, causing uneven pressure and resulting in jumping noises during operation. I recommend using a windshield cleaner to thoroughly clean the glass during dry weather. If the noise persists, replace the wiper blades immediately to avoid further complications. Seasonal changes have a significant impact—cold winters make the wiper blades harder, leading to more frequent noise. Therefore, don’t delay addressing this issue, as it can affect driving visibility.

Was this review help?
4
Share
Expand All
DelAddyson
10/01/2025, 12:17:37 AM

I'm also a frequent driver. A few days ago during heavy rain, the wipers were making terrible noises. Upon closer inspection, I found the wiper blades had cracked, clearly due to prolonged use and natural aging. The windshield was covered with oil stains and rain marks, making the wipers scrape like sandpaper. Usually driving in the city, with lots of road dust and leaf residue accumulating along the wiper path, every swipe would produce noise. Later, I learned a trick: right after parking, immediately wipe the windshield and the edges of the wiper blades with a wet cloth, or buy a bottle of wiper cleaning fluid to spray and wipe a few times, and the noise can be controlled. Remember to replace the wiper blades with new ones every year for a worry-free and quiet experience.

Was this review help?
18
Share
Expand All
MariaDella
11/14/2025, 01:05:21 AM

Having driven for decades, I've encountered windshield wiper noise quite often. The main culprit is the rubber on the wiper blades hardening with age, causing that annoying screeching sound against the glass during rain. If there's a stubborn oil film or dirt layer on the windshield, the friction noise becomes even worse. I make it a rule to replace wiper blades before every rainy season - they typically last only about two to three months anyway. Prevention is definitely more important than repair. For simple windshield cleaning, try wiping it several times with warm soapy water; it's effective and costs almost nothing.

Was this review help?
3
Share
Expand All
Rodrigues
01/04/2026, 02:46:09 AM

I pay close attention to vehicle details. Wiper noise often stems from degraded wiper blade material: prolonged exposure causes rubber to harden and become brittle, resulting in unsmooth wiping. A layer of oily film mixed with rainwater and sand on the windshield creates an uneven surface that amplifies noise. In terms of design, beam-style wipers have better aging resistance but can still develop issues over time. Practical solutions include regularly treating the windshield with wiper cleaner or trying new wiper blades with special coatings. Don’t underestimate this noise—it can cause wiper chatter and compromise visibility.

Was this review help?
18
Share
Expand All
MacMatteo
04/01/2026, 02:52:56 AM

Safe driving is my top priority. When the wipers make noise, I immediately stop to check and avoid danger. The main sources of the noise are often torn wiper blades or dirty windshields obstructing visibility, caused by hardened and aged rubber; oil film buildup on the glass surface creating resistance; or insufficient pressure from the wiper arm leading to uneven wiping. I insist on replacing the wiper blades every six months and always clean the windshield before the rainy season: alcohol wipes quickly solve the problem. Loud noises can be distracting, so addressing the issue promptly ensures clear visibility during rainy conditions.

Was this review help?
14
Share
Expand All
More Q&A

Can I renew my driver's license on the day it expires?

You can renew your driver's license on the day it expires. If the driver's license exceeds the validity period by more than one year without renewal, the license will be canceled. After cancellation, you need to pass the subject one exam to restore your driving qualification. Required materials for driver's license renewal: The driver's ID card, driver's license, three one-inch white background photos, and a medical certificate issued by a county-level or military regimental-level medical institution. Driver's license renewal process: Prepare the relevant renewal materials and go to the vehicle management office. Upon arrival, obtain and fill out the "Motor Vehicle Driver's License Application Form," which requires a photo. The driver must submit the original driver's license, medical certificate, application form, and personal photo to the vehicle management office where the license was issued. The office will process the renewal within one working day after approval. Notes for driver's license renewal: Renewal can only be done in advance; it cannot be postponed without a valid reason (if postponed, you must explain the reason to the traffic management department in advance). According to regulations, renewal can be done up to three months in advance. If the license is about to expire, you should renew it as soon as possible. If postponed, a fine will be imposed.
111
Share

Can the Old Driver's License Still Be Used After Replacement?

After replacing the driver's license, the old one cannot be used. According to relevant regulations, after an motor vehicle driver replaces their driver's license, the original license becomes invalid and must not be used anymore. Additionally, during the period when the driver's license is legally confiscated, detained, or temporarily suspended, the driver is not allowed to apply for a replacement. After losing the driver's license, there is no need to report it as lost; simply apply for a replacement at the vehicle management office in a timely manner. However, when applying for a replacement, you need to fill out a written statement declaring the loss of the driver's license to prove that it has indeed been lost. Currently, vehicle management offices do not support replacing the driver's license in a different location; the replacement must be processed at the vehicle management office where the license was originally issued. If personal reasons prevent you from going to the original location to apply for a replacement, you can also authorize a relative or friend to handle it on your behalf. Replacing the driver's license involves reissuing a new copy, but it does not change the original issuance date or the expiration date of the license. Therefore, motor vehicle drivers should apply for a renewal at the vehicle management office where the license was issued within 90 days before the original license expires.
109
Share

How many years does a new car's air conditioning stop cooling?

If a new car's air conditioning stops cooling after more than two years, it is important to regularly clean and maintain the air conditioning evaporator and replace the air conditioning filter in a timely manner. The functions of car air conditioning are: 1. To achieve a cooling effect through the continuous cycle of refrigerant; 2. To remove dust, odors, smoke, and toxic gases from the air inside the car, making the interior air fresher, and to humidify the air inside the car, increasing the relative humidity. The maintenance methods for car air conditioning are: 1. Do not set the temperature too low; 2. Control the direction of the air vents; 3. Avoid prolonged use; 4. Occasionally use high fan speed; 5. Turn off the air conditioning when driving at low speeds.
117
Share

Is it okay if the sedan's chassis got scraped?

It is generally okay if the sedan's chassis got scraped. The chassis consists of the transmission system, running gear, steering system, and braking system. Its functions include supporting and installing the car engine and its various components and assemblies, forming the vehicle's shape, receiving power from the engine to enable movement, and maintaining normal driving. Methods for maintaining the chassis include: 1. Regularly checking the oil levels of important assemblies; 2. Paying attention to the wear of brake pads and clutch plates; 3. Performing four-wheel alignment periodically; 4. Monitoring tire pressure and wear conditions; 5. Applying chassis sealing or installing chassis protective armor; 6. Reducing the frequency of driving on bumpy or muddy roads.
101
Share

What is the displacement of the BMW 320li?

The displacement of the BMW 320li is 2.0t, which is a four-cylinder turbocharged engine. Taking the 2021 BMW 320li as an example, it belongs to the mid-size car category, with body dimensions of: length 4719mm, width 1827mm, height 1459mm, wheelbase 2851mm, fuel tank capacity 60l, trunk capacity 460l, and curb weight 1465kg. The 2021 BMW 320li features a front suspension in the form of a double-joint spring strut front axle, rear suspension in the form of a multi-link independent suspension, maximum horsepower of 156ps, maximum power of 115kw, maximum torque of 250nm, and is paired with an 8-speed automatic manual transmission.
102
Share

Does the engine hood affect heat dissipation?

Engine hood does not affect heat dissipation. The engine hood is essentially a cover plate for the engine, primarily serving an aesthetic purpose and does not significantly impact the engine's performance. The function of the engine is to convert the thermal energy of gasoline into mechanical energy by burning the expanding gas in a sealed cylinder to push the piston and perform work. Methods for engine maintenance include: 1. Using qualified engine oil; 2. Using qualified coolant; 3. Regularly cleaning the radiator scale; 4. Regularly removing carbon deposits from the engine; 5. Timely replacement of the vehicle's air filter, oil filter, and fuel filter; 6. Checking if the spark plugs are damaged.
104
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.