Does the Qoros 5 have a reversing camera?

What are the computer operations for the subject one test?

Subject one test computer operations are: enter personal information, before the test, you need to enter your name, ID card, and use the keyboard and mouse to input your information before the test. Confirm the information is correct, verify personal information, and click the mouse to confirm before making any modifications. Start answering questions, be careful when answering questions, if you encounter any problems or do not understand, report to the invigilator in time. During the answering process, you can modify the answers before submitting the test paper. After completing the questions, you can review the questions again and fill in the blank questions to avoid missing any. After the test is completed, if everything is correct, click confirm to submit, and you can hand in the paper and leave. Subject one test precautions: Candidates must enter the examination room with their ID card and admission ticket to take the test. Before the test, the system administrator has already entered the candidate information into the corresponding computer. After entering the examination room, candidates only need to sit at the designated seat assigned by the invigilator. Candidates do not need to enter their information again, just verify and confirm, then press the "Start Test" button to begin the test. During the answering process, press the keys with moderate force, click gently. If you press too hard or hold the key for too long, it may result in continuous answers. If this happens, you can press the "Previous Question" button to return to the original answering interface and re-answer. If you encounter any computer system problems during the answering process, you can raise your hand to signal and ask the invigilator to handle it. Do not press the "Submit" button randomly during the test. After answering all the questions, you can click the "Submit" button twice, the system will terminate the test and display the score of this test.

117

Share

Will Looking at the Gear Shift Cause Failure in Subject Three?

During the Subject Three driving test, you must not look at the gear shift while changing gears. Your eyes should be on the road, your left hand must stay on the steering wheel, and your right hand should operate the gear shift. Here are some gear shifting tips: 1. Practice using the clutch pedal frequently to become proficient. Be steady and develop good habits—press it all the way down and release it slowly. 2. Coordinate the throttle and clutch. Start in first gear, release the clutch slowly, and apply throttle at the half-clutch point. Only release the clutch fully once the car starts moving. 3. Master the timing of gear shifts. Shift when the engine reaches around 2000 RPM—first ease off the throttle, then press the clutch to avoid forced disengagement, and then shift. Always shift up in order: first gear → second gear → third gear → fourth gear → fifth gear. Skipping gears is not recommended. Downshift based on speed and engine conditions, typically when the RPM drops below around 1500.

118

Share

What is the required distance for pulling over in the subject three driving test?

In the subject three driving test, the regulation requires parking within 30 centimeters of the curb. Below is relevant information about pulling over in the subject three test: 1. Required distance for pulling over: "Pulling over" is a key point in subject three, requiring the wheels to be within 30 centimeters of the right edge of the road after parking. This must be completed in one attempt without touching the edge line. While this task may not seem difficult, parking quickly and accurately within 30 centimeters of the curb requires skill. 2. Techniques for pulling over: Generally, you first need to find your reference point—the point where the car is 30 cm from the edge line after parking. Since everyone's height is different, this point varies. You can ask your instructor to help you find this point by parking the car 30 cm from the edge line. You can use the wiper, a mark on the car window, or align the front of the car with the edge line. Then, simply move the car slowly toward the edge, align the found point with the edge line, straighten the steering wheel, and adjust the car's position. Before stopping, check the right rearview mirror; if the door handle is close to the edge line, you can stop.

111

Share

Where is the ETC device installed in the car?

For small cars, the ETC device is generally installed in the upper middle part of the front windshield, while for large vehicles such as trucks and buses, the installation position is in the middle to lower part. The appropriate installation position should be no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 and 90 degrees. For vehicles with anti-explosion film or those that have been retrofitted with anti-explosion film, which may affect the signal transmission of the microwave communication link, the device should be installed in the microwave sunroof strip. ETC stands for Electronic Toll Collection, which is an electronic toll system. To apply for ETC, the vehicle owner needs to provide original and photocopies of their valid ID card and vehicle registration certificate. If the application is handled by a proxy, the proxy's valid ID card is also required. The photocopy of the vehicle registration certificate should include the page with the most recent annual inspection stamp. Additionally, a bank card under the personal name of the owner, aged between 18 and 60, is needed for deducting highway tolls. Here are some precautions for installing ETC: Do not obstruct the view; it is best to install it behind the rearview mirror: Many car models have a large inclination angle for the windshield, which can reduce the driver's field of vision. If this is not considered during ETC installation, it can increase the driver's blind spots. Installing it behind the right side of the rearview mirror can help avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement because it has a solar panel on the back that can charge itself. Therefore, during installation, avoid the black areas on the windshield and positions that may block the solar panel. Once installed, do not remove it arbitrarily: The button in the middle of the adhesive is an anti-removal lever connected to a switch. After the electronic tag is installed on the windshield, the anti-removal lever will be pressed in. If the tag is removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. In such cases, you will need to visit an ETC service point to unlock it. This mechanism is designed to prevent multiple vehicles from sharing one device. When using ETC, note the following: The ETC transaction sensing range is 8 meters. To avoid issues caused by a malfunctioning ETC device in the vehicle ahead, maintain a distance of more than 10 meters from the preceding vehicle to prevent automatic toll deduction for the wrong vehicle. The ETC lane recognizes vehicles at a speed of 20 kilometers per hour; driving too fast may result in failure to read the vehicle's device information and subsequent toll deduction failure. When using a debit card linked to ETC, insufficient balance may also cause toll deduction failure.

108

Share

What are the differences between the Mazda CX-4 Youth Edition and Vitality Edition?

The biggest difference between the Mazda CX-4 Youth Edition and Vitality Edition models lies in their configurations. The Vitality Edition adds features such as front and rear parking radar and an electric sunroof. Here is an introduction to the Mazda CX-4: 1. Body Dimensions: In terms of body dimensions, the Mazda CX-4 measures 4637/1855/1524 mm in length, width, and height, with a wheelbase of 2700 mm. 2. Powertrain: In terms of power, this car is equipped with 2.0L and 2.5L engines. The 2.0L engine has a maximum power of 116 kW and a maximum torque of 202 Nm, while the 2.5L engine has a maximum power of 141 kW and a maximum torque of 252 Nm. In terms of the transmission system, the engines are paired with a 6-speed automatic transmission.

110

Share

Can Small Hail Damage Vehicles?

Small hail, with a diameter not exceeding two centimeters (about the size of a soybean), generally does not cause significant damage. Here is a related introduction on how to handle vehicle damage caused by hail: 1. Locate the Insurance Policy: Do not move the vehicle. Find the car insurance policy to check if it includes auto damage coverage. If the car is within the insurance period, you must report the incident to the insurance company within 24 hours. 2. Weather Proof: Unlike other auto insurance claims, many insurance companies require the vehicle owner to provide weather proof for hail damage. Therefore, it is best to obtain a weather certificate in advance or keep relevant media reports as proof for the claim. 3. Authorized Repair: Take the vehicle to an authorized repair shop or a 4S store for repairs. The owner must first pay the expenses out of pocket, and then the insurance company will transfer the reimbursement to the corresponding bank card.

111

Share