Does Subject 4 Have True or False Questions?

How many years of holding a B2 driver's license are required to upgrade to an A1?

You can upgrade to an A1 driver's license after holding a B2 license for more than five years. Additionally, you must not have accumulated 12 penalty points in the current scoring cycle or the last three consecutive cycles to be eligible for the A1 upgrade. An A1 driver's license allows you to operate large passenger vehicles. Conditions required to upgrade to an A1 license: If you hold a C-class license, you cannot directly upgrade to an A1. You must first upgrade to a B-class or A3 license and hold it for at least three years before applying for an A1 upgrade. The applicant must be at least 22 years old and under 60 years old. No red-green color blindness is allowed, and uncorrected or corrected vision must be at least 5.0. Physical conditions such as height and weight must meet standards, with all limbs intact, including a fully functional thumb and at least three other fingers. No record of causing a fatal traffic accident with full or primary responsibility. Such a record disqualifies applicants from upgrading to A1, A2, or B2 licenses. Additional regulations for upgrading to medium-sized buses, tow trucks, or large passenger vehicle licenses: To upgrade to a medium-sized bus license, the applicant must have held a license for small cars, automatic transmission cars, low-speed trucks, or three-wheeled vehicles for at least three years, with no full penalty points in the last two consecutive scoring cycles. Alternatively, the applicant must have held a city bus or large truck license for at least one year with no full penalty points in the last scoring cycle. To upgrade to a tow truck license, the applicant must have held a medium-sized bus or large truck license for at least three years, with no full penalty points in the last two consecutive scoring cycles. Alternatively, the applicant must have held a large passenger vehicle license for at least one year with no full penalty points in the last scoring cycle. To upgrade to a large passenger vehicle license, the applicant must have held a medium-sized bus or large truck license for at least five years, with no full penalty points in the last three consecutive scoring cycles. Alternatively, the applicant must have held a tow truck license for at least two years with no full penalty points in the last scoring cycle. Temporary residents can only apply for upgrades to small cars, automatic transmission cars, low-speed trucks, or three-wheeled vehicles. Article 15: Applicants upgrading to large passenger vehicles, tow trucks, or medium-sized buses must not have any record of full or primary responsibility in fatal traffic accidents. Upgrading from B2 to A1 requires passing four exam sections: Section 1 (theoretical safety and civilized driving training), Section 2 (in-road safety and civilized driving training), Section 3 (out-road safety and civilized driving training), and Section 4 (theoretical safety and civilized driving training).

102

Share

What does it mean to check tire pressure?

Checking tire pressure refers to the situation where one or more tires have insufficient or excessive air pressure, triggering a tire pressure warning. Both under-inflation and over-inflation can lead to abnormal tire wear, shortening the tire's lifespan, increasing fuel consumption, and even raising the risk of a blowout. Tire pressure is the air pressure inside the tire, and its level significantly impacts the vehicle's performance and power, including ride comfort and load capacity, as well as the tire's lifespan. Proper tire pressure is critical—whether too high or too low, it can drastically reduce the tire's service life.

111

Share

Where is the oil filter of Geely Boyue located?

Geely Boyue's oil filter is located at the upper right front of the engine. Here is more information about the oil filter: 1. The main function of the filter is to remove impurities from the engine oil to prevent clogging over time. 2. The oil filter is one of the vehicle's wear parts and needs to be replaced every time the oil is changed. If the oil filter is not replaced, the effect of changing the oil is not significant. 3. The oil filter is part of the engine lubrication system, filtering harmful impurities from the oil in the oil pan and supplying clean oil to other components.

120

Share

What Causes the Jetta's Radiator to Boil Over?

Jetta's radiator boiling over can be attributed to the following reasons: 1. Insufficient coolant - prolonged water circulation during engine operation gradually depletes the coolant in the engine's cooling system, leading to radiator fluid shortage; 2. Dirty or clogged radiator exterior/interior surfaces - affecting heat dissipation or poor coolant circulation; 3. Faulty thermostat - preventing radiator coolant from participating in circulation cooling; 4. Damaged water pump - causing coolant circulation failure and resulting in high water temperature. Taking the Jetta VA3 as an example, its body dimensions are 4501mm in length, 1704mm in width, 1469mm in height, with a wheelbase of 2604mm.

106

Share

Is it possible to coast in neutral with a manual transmission?

Manual transmission vehicles should not coast in neutral. This is because coasting in neutral can cause impact on the transmission and also affect the driving safety of the vehicle. Coasting in neutral refers to the operation method where, while the vehicle is in motion, the driver shifts the gear lever to the neutral position, disengaging the clutch between the engine and the drive wheels, allowing the vehicle to move by inertia. The hazards of coasting in neutral are as follows: 1. It can lead to loss of vehicle control, engine stalling, reduced braking effectiveness, and longer braking distances. 2. It weakens steering assistance, accelerates transmission wear, increases engine carbon buildup, and raises vehicle fuel consumption. 3. It prevents the vehicle from regaining power immediately after descending a slope.

101

Share

What are the causes of car hose rupture?

Car hose rupture is caused by poor hose quality or aging. After the hose bursts, the car cannot continue to drive and must be repaired by replacing the hose and adding water or coolant before it can be driven again. You can observe whether the car hose is swollen. Some hoses will become significantly larger after prolonged use, making it obvious that the hose clamp is much smaller compared to the swollen hose. In such cases, it is advisable to consider replacing all the car hoses. Car hoses have the functions of circulation and heat dissipation. When the car is running, it generates a lot of heat. If the engine is not cooled in time, it will increase engine wear and shorten its lifespan.

102

Share