Does Severe Gear Shifting Jerk Damage the Car?

What is the difference between Shell HX5 Plus and HX6?

Shell HX5 Plus is a mineral oil, while HX6 is a synthetic oil. The main differences between Shell HX5 Plus and HX6 are as follows: 1. Chlorine content: HX6 has lower chlorine content than HX5, meeting environmental requirements and making waste oil disposal safer. 2. Stability: Compared to HX5, HX6 has a 24% longer lifespan, 34% better shear stability, and twice the sludge removal efficiency of HX5. 3. Temperature resistance: HX6 outperforms HX5 in both high and low-temperature performance. HX6 can withstand 220°C and -39°C, higher than HX5's 210°C and -33°C.

115

Share

What are the models of SUV cars?

SUV cars include the Roewe RX5, Changan New CS75, and Geely Boyue. Below is a detailed introduction to these SUV models: 1. Roewe RX5: The RX5 is equipped with two turbocharged engines, a 1.5T and a 2.0T. The 1.5T engine has a maximum power of 169 horsepower and a peak torque of 250Nm, paired with either a manual or TST 7-speed dual-clutch transmission. 2. Changan New CS75: The new CS75 features a 10.25-inch floating central control screen and a full LCD instrument panel. 3. Geely Boyue: The Geely Boyue combines a 1.8TD twin-scroll direct-injection turbocharged engine with a 6AT-DSI automatic manual transmission.

114

Share

How often should the CVT transmission steel belt be replaced?

Under normal usage, the lifespan of a CVT transmission steel belt is approximately 200,000 kilometers, which is significantly influenced by individual driving habits. CVT stands for Continuously Variable Transmission. Below are the advantages of using a CVT transmission: 1. Excellent fuel economy: CVT can achieve stepless speed change over a wide range, obtaining the best match between the transmission system and engine conditions. By relying on the transmission's stepless speed regulation to adapt to various vehicle speeds, the engine can operate under optimal conditions for extended periods, thereby improving combustion efficiency and fuel economy. 2. Superior power performance: CVT can achieve closed-loop control with the engine, fully utilizing the engine's maximum torque. Its performance in reducing speed and increasing torque is significantly better than MT and AT. Therefore, when installed in SUV models that emphasize torque, CVT-equipped vehicles show a 7.5% to 11.5% improvement in acceleration performance (0~100km/h) compared to AT vehicles, with better high-speed acceleration than MT vehicles. The characteristics of CVT make its power performance notably superior to manual transmissions (MT) and automatic transmissions (AT). 3. Enhanced comfort: CVT improves driving comfort. Without fixed gears, the shifting process is continuous and linear, providing smooth acceleration without gear shift shocks. There is no downshift jerking during rapid acceleration as with AT. The CVT system has a wide transmission ratio range, typically between 2.400 and 0.395, allowing the engine to run at low speeds with minimal noise during high-speed driving, offering a quiet and relaxed driving experience for both the driver and passengers. 4. Improved handling: When matched with a torque converter, the CVT transmission can amplify engine torque, resulting in quicker starts and smoother acceleration. When overtaking, deep pressing of the accelerator does not produce the downshift sensation of AT but instead adjusts the speed ratio to amplify torque. During high-speed cornering, releasing the accelerator does not cause the upshift phenomenon seen in AT, maintaining torque for exiting corners at high speeds. CVT provides superior engine braking compared to AT. It can automatically detect slopes, adjusting the speed ratio to increase torque output when climbing and enhancing engine braking torque when descending long slopes to reduce coasting speed, thereby improving safety and handling.

108

Share

What are the penalties for driving into the opposite lane?

Driving into the opposite lane will result in a deduction of 3 points, and if the opposite lane happens to have a red light, you will be penalized with a deduction of 6 points. According to the "Scoring Standards for Road Traffic Violations," the following are stipulated: Article 2, Clause 1, Driver's License: Driving a motor vehicle while the driver's license is temporarily suspended. 2. Traffic Lights: Driving a motor vehicle in violation of road traffic signal lights. 3. Passenger Load: Operating a commercial passenger vehicle (excluding buses) or school bus with passengers exceeding the approved capacity by less than 20%, or driving other passenger vehicles with passengers exceeding the approved capacity by more than 20%, will result in point deductions.

107

Share

Is the GW4C20B engine a joint venture or domestically produced?

The engine model GW4C20B is independently developed by Great Wall Motors and belongs to a domestically produced engine. Models equipped with the GW4C20B engine have a maximum power of 124KW, a maximum torque of 285Nm, and a maximum horsepower of 169. The 2.0T version of the engine has a maximum power of 165KW, a maximum torque of 385Nm, and a maximum horsepower of 224. Daily maintenance of the engine can be performed using the following methods: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected based on mechanical load, with the selection standard not lower than the requirements specified by the manufacturer. Regularly change the oil and oil filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine problems. To avoid faults, change the oil regularly according to usage conditions and maintain an appropriate oil level. When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve, bringing dirt back to the lubrication area and accelerating engine wear, increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gas, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from part wear to form sludge. Small amounts remain suspended in the oil, while large amounts precipitate, blocking filters and oil holes, making engine lubrication difficult and causing wear. Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures normal engine operation but also extends the overall lifespan of the radiator and engine.

102

Share

What are the techniques for pressing the cakes in B2 subject 2?

The techniques for pressing the cakes in B2 subject 2 are as follows: 1. Gear shifting: Shift to 1st gear, control the speed with the clutch, align the left water line of the front hood slightly to the left of the 1st and 2nd manhole covers, and pass through the 1st and 2nd manhole covers. 2. Passing manhole covers: When passing the 2nd manhole cover, observe the trademark at the lower left corner of the front window. When the trademark slowly moves to the right edge of the 3rd manhole cover (better late than early), turn the steering wheel 2 turns to the left. When the left water line of the front hood approaches the ground marker point, turn the steering wheel 2 turns to the right to straighten the direction (you can also observe the center extension line of the manhole cover in advance to control the direction of the car), and pass through the 3rd manhole cover. When passing the 3rd manhole cover, observe the third node of the right wiper at the bottom of the front window (the third node from the head of the wiper to the left). When it slowly moves to the right edge of the 4th manhole cover (better late than early), turn the steering wheel 2 turns to the right. When the left water line of the front hood approaches the ground marker point, turn the steering wheel 2 turns to the left to straighten the direction, and pass through the 4th manhole cover. When passing the 4th manhole cover, observe the top of the left rearview mirror. When the 5th manhole cover completely moves to the top of the left rearview mirror (better late than early), turn the steering wheel 2 turns to the left. When the left water line of the front hood approaches the ground marker point, turn the steering wheel 2 turns to the right to straighten the direction, and pass through the 5th manhole cover.

108

Share