···
Log in / Register

Does driving over a crosswalk count as running a red light?

1Answers
SanEva
07/28/2025, 10:25:09 AM

If the vehicle stops at the crosswalk without continuing to drive, it does not count as running a red light but rather as overstepping the stop line. According to Article 4, Item 5 of the 'Scoring Standards for Road Traffic Safety Violations': Failing to drive or stop as required when passing through an intersection results in a 2-point deduction. The act of running a red light is clearly defined in the 'Road Traffic Safety Law.' Article 26 states that traffic signals consist of red, green, and yellow lights. A red light indicates prohibition, a green light indicates permission, and a yellow light serves as a warning. A red light is a traffic signal that prohibits passage. If a vehicle proceeds through an intersection when the light is red, it constitutes the traffic violation of running a red light. Running a red light refers to the act where, when the vehicle is within the stop line and the forward direction is already a red light, the vehicle continues to move forward until both its front and rear wheels have completely crossed the stop line. This is determined by capturing three photos via electronic cameras: A photo of the vehicle crossing the intersection stop line, including the red light and license plate number. A photo of the vehicle completely crossing the stop line, including the red light and license plate number. A photo showing the vehicle continuing to move, with a comparison to check for changes in the vehicle's position, including the red light and license plate number. Capturing these three photos confirms the act of running a red light. Running a red light is not considered illegal under the following circumstances: Yielding to special vehicles: Yielding to ambulances, fire trucks, or other special vehicles. If captured by surveillance cameras while yielding, manual review will not record the act as running a red light. Even if recorded, you can apply for reconsideration with the traffic police department. Extreme weather: When visibility is so low that even electronic police cannot clearly see the traffic lights. Photos of the violation may be blurry, and accidental running of a red light will not be penalized by traffic police. Emergency situations: After delivering a patient with a critical condition, providing proof from the hospital or the person being assisted to the traffic police for verification can result in the removal of the violation record. If possible, it is best to call an ambulance to avoid traffic accidents caused by running a red light. Traffic police direction: During peak hours, traffic police may temporarily direct traffic at important intersections. Drivers must follow the gestures of the traffic police.

Was this review help?
119
Share
More Q&A

Can a vehicle with expired mortgage be purchased?

Whether a vehicle with expired mortgage can be purchased depends on the actual situation. For such vehicles, the mortgage needs to be released by applying for mortgage deregistration at the vehicle management office of the registration location. When releasing the mortgage, the vehicle owner must submit valid credentials. If the vehicle has not been sealed or impounded by the People's Court, People's Procuratorate, or administrative law enforcement departments, and the mortgage has been released, the buyer can proceed with the purchase after understanding the vehicle model and other details. The qualification methods for selling mortgaged vehicles are as follows: 1. Failed debt collection: If the borrower cannot repay, the bank will not immediately apply for vehicle auction but will first demand repayment of the loan and interest. Only if repayment is not received after the mortgage expires will the bank apply for vehicle auction, which can proceed only after court approval. 2. Priority debt repayment: After the vehicle is sold, the proceeds will first repay the bank's principal, with the remaining funds returned to the borrower. At this point, the mortgage is automatically released, the debt relationship terminates, and the mortgage status is naturally lifted. Apart from the inability to transfer ownership, mortgaged vehicles can undergo annual inspections, out-of-province annual inspections, and insurance services normally.
106
Share

What brand is Rassurer tires?

Rassurer tires are from the Bridgestone brand. Here is some information about tires: Introduction 1: Tires are ring-shaped elastic rubber products mounted on various vehicles or machinery to roll on the ground. They are usually installed on metal rims to support the vehicle body, cushion external impacts, maintain contact with the road surface, and ensure driving performance. Introduction 2: Tires often operate under complex and demanding conditions, enduring various deformations, loads, forces, and temperature extremes during use. Therefore, they must possess high load-bearing capacity, traction performance, and cushioning ability. Additionally, they are required to have excellent wear resistance, flex resistance, as well as low rolling resistance and heat generation.
113
Share

What causes the BMW X5 to shake at idle?

BMW X5 shaking at idle can be caused by: 1. Severe engine carbon buildup: The most common cause of car shaking is a dirty throttle body or excessive carbon deposits on the fuel injectors. After starting, gasoline adsorbed on the carbon deposits will be sucked into the cylinder by the engine's vacuum suction for combustion, enriching the air-fuel mixture. This causes the engine's combustible mixture to fluctuate between lean and rich, resulting in idle shaking after a cold start. The lower the temperature, the more fuel is required for a cold start, and the presence of carbon deposits will significantly affect whether the cold start proceeds smoothly. Solution: Clean the fuel system and check if the idle air control valve has carbon buildup, which should be thoroughly cleaned. 2. Ignition system issues: Check the condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance of the ignition system or inadequate spark plug firing can also lead to such symptoms. Solution: Check if the spark plugs have excessive carbon buildup and replace them if necessary. 3. Unstable fuel pressure: If you have already cleaned the engine carbon deposits, throttle body, replaced gaskets and spark plugs, but still experience shaking at idle, it is recommended to visit a 4S shop to check the fuel supply pressure and the intake pressure sensor. Abnormal fuel pump pressure or incorrect readings and poor performance of the intake pressure sensor can cause the car to shake. Solution: Check the fuel pressure and replace components if necessary.
108
Share

What should be paid attention to when buying car insurance?

When purchasing car insurance, the following issues should be noted: 1. Spontaneous combustion insurance: For new cars, the chance of spontaneous combustion is relatively low, so this coverage is not a must-buy. Similarly, the probability of glass breakage occurring alone is also low. However, for older cars or those with modified circuits, it is advisable to purchase spontaneous combustion insurance. Lastly, the no-deductible insurance can be quite useful for many car owners and is also worth considering. 2. Vehicle damage insurance and commercial third-party liability insurance: Apart from compulsory traffic insurance, car owners should try to purchase vehicle damage insurance and commercial third-party liability insurance. These two types of coverage can help minimize the financial loss to the car owner in the event of an accident. Additionally, car owners can decide whether to purchase theft insurance based on their specific usage environment. 3. Purchase channels: Care should be taken to choose legitimate insurance companies and agents who have professional qualification certificates, practice certificates, and formal agency contracts with insurance companies. 4. Renewal: For car owners renewing their insurance, there exists a floating rate for car insurance. This means that car owners with fewer claims can enjoy discounts on their premiums. Conversely, those with more claims may need to pay higher insurance fees upon renewal.
101
Share

What is the difference between fast charging and slow charging for charging piles?

Fast charging and slow charging are relative concepts. Generally, fast charging refers to high-power DC charging, which can charge a battery to 80% capacity in half an hour, while slow charging refers to AC charging, which takes 6 to 8 hours to complete. Below is more information about charging piles: 1. Charging time: With current battery technology, even fast charging takes 30 minutes to charge a battery to 80% capacity. Beyond 80%, to protect battery safety, the charging current must be reduced, making the time to reach 100% longer. Additionally, in colder winter temperatures, the battery requires a smaller charging current, further extending the charging time. 2. Charging mode: A vehicle can have two charging interfaces because there are two charging modes: constant voltage and constant current. Typically, a combination of constant current followed by constant voltage is used for higher charging efficiency. Fast charging achieves its speed due to differences in charging voltage and current—the higher the current, the faster the charge. As the battery nears full capacity, switching to constant voltage prevents overcharging and protects the battery. 3. Socket specifications: Currently, portable chargers come with plugs for household 220V power outlets in two specifications: 10A and 16A. Different vehicle models are equipped with different plugs—some have 10A plugs, while others have 16A plugs. The 10A plug is the same size as standard household appliance plugs, with smaller pins. The 16A plug has larger pins, similar in size to an air conditioner socket, making it relatively less convenient to use.
110
Share

What Type of Oil Should Be Used for an Air Compressor Pump?

It depends on the type of air compressor. For small air pumps, general mechanical oil is usually sufficient, as long as the viscosity is not too high. For compressors with a capacity of 0.6 cubic meters or more, specialized compressor oil should be used. High-pressure or high-capacity compressors operating continuously in factories should use lubricants as specified in the manual. Below are some related introductions: Introduction 1: The automotive air compressor works by drawing in natural air and pumping it into the air storage tank or reservoir in the vehicle's chassis. For vehicles with air brakes, insufficient air pressure can affect starting, while for other air-brake vehicles, it can impact braking performance. Introduction 2: When an air compressor fails to build sufficient air pressure, it is often referred to as: insufficient brake air pressure, low brake pressure, the air pump failing to build pressure, the air pump not pumping air, slow air pressure buildup, low air pressure during high-speed driving, normal air pressure during regular driving, or the air pressure not rising, among other terms.
115
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.