Do you need to start the engine before getting in the car for Subject 2?

1 Answers
Cindy
07/29/25 5:10pm
Generally, there is no need to start the engine. The examinee only needs to get in the car, adjust the rearview mirrors and seat, fasten the seat belt, and wait for the test to begin. However, it is possible that the test vehicle may have stalled before the examinee gets in. Below is some relevant information about the Subject 2 test: 1. Test content: The test items for car licenses C1 and C2 include five mandatory items: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves. 2. Passing criteria: According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the Subject 2 test for C1 and C2 licenses is scored out of 100 points. Deductions for each item include failing (directly deducting 100 points), deducting 20 points, deducting 10 points, and deducting 5 points. A total score of 80 points or above is considered passing.
Was this review help?
19
3
Share
More Forum Discussions

Why is the Mazda6 called Atenza?

Atenza is the third generation of the Mazda6. Generally, when referring to the Mazda6 alone, it defaults to the first generation. There are three generations of the Mazda6: the first-generation Mazda6; the second-generation Mazda6 Ruiyi; and the third-generation Mazda6 Atenza. Relevant information about the Atenza is as follows: 1. Introduction: The Atenza is a new-generation mid-to-high-end sports sedan flagship model developed and manufactured based on Mazda's spirit of 'breaking conventions and starting from scratch.' 2. Design: The Atenza continues the exterior design of the imported version of the Atenza, adopting Mazda's KODO design philosophy, with a U-shaped front grille paired with LED headlights, enhancing its sporty feel.
6
5
Share

What is the urban fuel consumption of the Nissan Qashqai?

The urban fuel consumption of the Nissan Qashqai is 6.8-7.3 liters per 100 kilometers. Below is relevant information about the Nissan Qashqai: 1. Introduction to the Nissan Qashqai: The Qashqai, meaning 'urban nomad,' is the first product designed by Nissan's European Design Center, positioned between a compact SUV and a hatchback. Unlike Crossover models directly produced on sedan platforms, the Qashqai is a product specifically designed by Nissan for this unique market segment. 2. Features of the Nissan Qashqai: As a true urban SUV designed for driving pleasure, the Qashqai was developed with a focus on integrating multiple functionalities from the outset. It combines the characteristics of SUVs and sedans, optimizing and balancing aspects such as exterior design, interior, handling, and comfort to forge its core product strengths, making it a representative model among best-selling SUVs.
10
4
Share

What Happens When a Car Is Exposed to Prolonged Sunlight

Leaving a car exposed to sunlight for extended periods can accelerate the oxidation of the car's paint. Once the paint oxidation speeds up, the glossiness of the car's paint will diminish, and it can also affect the lifespan of the fuel tank's carbon canister. Prolonged exposure to high temperatures can lead to aging of the car's fuel lines, increasing the risk of spontaneous combustion. The car may suffer from the following damages: 1. Engine damage: If a car remains in a high-temperature environment for a long time, its cooling capacity will deteriorate, causing the engine temperature to rise more easily. This means its performance will decline, which is a fatal blow to the engine. 2. Fuel system damage: Outdoor temperatures can be relatively high, often exacerbating wear and tear on the car's components, thereby affecting the engine's service life. 3. Battery damage: When the battery temperature rises, issues may arise with the negative terminal due to the aging of the insulation layer, such as unstable voltage.
1
5
Share

What are the tips for reversing a car?

Here are some tips and methods for reversing a car: 1. Adjust the position between the car body and the corner of the garage: When reversing for the first time, lean forward to check the right rearview mirror to observe the positional relationship between the car body and the corner of the garage in advance. Predict whether the car body will be too close or too far from the corner based on the image seen in the rearview mirror, then steer to correct it. It's best to maintain a distance of 30 centimeters between the car body and the corner. 2. Correct the car body inside the garage: Adjust the direction after the rear part of the car body enters the garage space. Observe the left and right rearview mirrors to determine which side the front of the car is leaning towards and which side the rear is leaning towards, then steer towards the side the front is leaning to correct the car body. 3. Find the right stopping point: Judge when to stop by observing the relationship between the left rearview mirror and the boundary line. When the left rearview mirror covers the boundary line, immediately press the clutch to stop.
18
0
Share

Do You Need to Turn on AC When Using Car Heater?

You don't need to turn on AC when using the car heater. The AC button in a car controls the air conditioning compressor, which is essentially the cooling switch. The warm air comes from the heat generated by the coolant circulating in the engine, which is then delivered into the cabin through the air delivery system without requiring the air conditioning compressor to be activated. Therefore, there's no need to turn on the AC switch when using the heater in winter. Precautions for using car air conditioning: 1. Turn off A/C during startup and rapid acceleration: Since the air conditioning (non-independent type) consumes some engine power, it's best to turn off the A/C when starting or accelerating rapidly, then turn it back on after the car is moving. This prevents engine power shortage during acceleration and startup while also saving fuel. 2. Control air vent direction: Based on the principle that cold air sinks and warm air rises, drivers should adjust the air vents upward when using cooling and downward when using heating. 3. Don't immediately turn on AC after sun exposure: After a car has been exposed to the sun, the interior temperature is usually very high. In such cases, drivers shouldn't immediately turn on the air conditioning. It's better to first open the windows for ventilation and wait for the hot air to dissipate before turning on the AC.
8
4
Share

What to Do When the Front Windshield Fogs Up on Rainy Days?

Here are some methods to deal with fogging on the front windshield during rainy days: 1. Turn on the heater directly: Increase the fan speed, and the dry, warm air will evaporate the water molecules in the car's interior air, preventing fog from forming on the windshield. However, this method has a drawback: when the windshield starts to frost, turning on the heater raises the water temperature, and since water molecules cannot be removed in time, the fog on the glass often increases initially. But don't worry—once the overall temperature rises, the fog will disappear. 2. If the rain isn't heavy, you can open the windows slightly for a few seconds to help clear the fog: The principle is to lower the interior temperature, making it harder for moisture to condense. This method is generally more effective in winter because the air is drier, and opening the windows can help remove moisture from the car. However, on rainy days when the outside air is more humid, it may take longer. 3. Turn on the car's defroster directly: This is the simplest way to remove fog. The principle involves blowing dry, cold air from the car's interior onto the front windshield, equalizing the temperature inside and outside the glass and creating a dry air barrier. This prevents condensation of humid air inside the car and stops fog from forming.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.