Do I still need to display the vehicle annual inspection sticker?

How to Reset the Tire Pressure Warning on a Sagitar?

First, restore the tire pressure to the normal level; start the vehicle; find the tire option on the central control screen and press the reset button. If the tire is damaged, it needs to be replaced. The following describes the replacement method: 1. First, park the vehicle on a level road. If on the road, place a safety warning sign behind the vehicle, then loosen all the tire nuts. When removing the nuts, loosen them diagonally to avoid uneven force distribution on the wheel hub. 2. Place the jack directly under the support point, then slowly adjust the jack to raise the chassis. Once the tire is off the ground, it can be removed. 3. Position the new tire in place, then slowly lower the vehicle. Tighten the nuts with a special tool, ensuring to use the diagonal tightening method. The tightening operation should be performed when the wheel touches the ground.

16

3

Share

How to Upgrade the In-Car Multimedia System?

To upgrade the in-car multimedia system, first determine whether the system is factory-installed or aftermarket. If it's aftermarket, download the required system program onto a USB drive, then upgrade the system via the interface without interrupting the power supply. Additional details are as follows: 1. In-car multimedia systems in vehicles are divided into two types: one is factory-installed, and the other is aftermarket. The upgrade methods for these two systems differ. The factory-installed multimedia system can only be upgraded at an authorized 4S shop for system map updates. The aftermarket multimedia system can be upgraded simply via USB transfer. 2. During the upgrade, note that some vehicle models have a dedicated USB cable for the host unit, which is not universal across all models. During the upgrade process, the central control interface will display a 'Connecting for Upgrade' message—do not disconnect the power. Power interruption may cause upgrade errors, which can be troublesome. After the upgrade is complete, restart the vehicle to access the upgraded interface.

9

5

Share

Can Deformed Car Tires Cause Body Vibration?

Deformed car tires can indeed cause body vibration. While driving, deformed tires may produce a sensation of up-and-down shaking, which can affect the comfort of the vehicle. If a car's tires are found to be deformed, they must be replaced immediately to prevent any impact on the normal use of the vehicle. Additionally, there are many other factors that can cause body vibration. Vibration during startup is often caused by insufficient fuel combustion, leading to a lack of power. Idle vibration can be due to severe engine carbon buildup, issues with the ignition system, or unstable oil pressure. High-speed vibration may result from excessively high or low tire pressure, abnormal tire wear, deformed rims, failed shock absorbers, or tire balance issues. Engine mount aging. Engine mounts act as the shock absorption system for the engine, absorbing minor vibrations during operation. If the engine mounts are faulty, vibrations can transfer to the steering wheel and cabin, causing the car to shake. The solution for body vibration caused by deformed car tires is: It is necessary to promptly visit a 4S shop for inspection and replacement of the car tires.

17

1

Share

How to Deal with Brake Failure While Driving?

The methods to handle brake failure while driving are as follows: 1. Remove your foot from the accelerator pedal and press the brake pedal with both feet to confirm the brakes are ineffective; 2. Use the handbrake in coordination, but avoid pulling it too quickly to prevent the handbrake from failing; 3. Pay attention to the direction of the vehicle and ensure you are wearing a seatbelt, which can help reduce injuries; 4. Continuously honk the horn to alert others to the vehicle's abnormality; 5. Adjust the seat backward to create space for impact; 6. Relax your joints and prepare for the impact. The following are the causes of brake failure: 1. Improper operation leading to mechanical failure; 2. Severe overloading increases the vehicle's inertia due to gravitational acceleration, directly causing brake failure; 3. Lack of regular maintenance of the brake system. Excessive impurities in the brake pump, poor sealing, or severe contamination of brake fluid can lead to brake pump oil leakage, air tank or pipeline interface air leakage when the brake system overheats, resulting in brake failure.

1

0

Share

Where is the manual transmission of the Roewe RX5 produced?

The manual transmission used in the Roewe RX5 is the SCM250 manual transmission from Shanghai Gear Works. It is the same model as that used in the MG GS and is based on technology originally from Germany's LUK company. Below are the relevant details: 1. The 1.5T and 2.0T engines in the Roewe RX5 are the same as those in the earlier-launched MG GS, and both are produced at SAIC's Lingang factory. 2. The 1.5T engine is paired with either a 6-speed manual transmission or a 7-speed dry dual-clutch transmission, while the 2.0T engine is matched with a 6-speed wet dual-clutch transmission. Apart from the manual transmission option for the 1.5T, all other transmissions are dual-clutch types. 3. Compared to automatic models, the manual transmission in the Roewe RX5 offers more direct power delivery and a more engaging driving experience. Additionally, manual transmission models are generally priced lower, making them a more economical choice for consumers.

11

5

Share

How long will it take for the vehicle transfer to expire after successful completion?

There is no time limit for the vehicle transfer application after it is successfully completed. It should be noted that the vehicle inspection must be completed within three working days from the date of acceptance by the vehicle management office of the destination, and the application cannot be made within two years after expiration. Vehicle transfer requires the replacement of license plates and the vehicle registration certificate, and the procedures should be handled separately in two vehicle management authorities, including the procedures for transfer out and transfer in. Materials required for vehicle transfer: Identity proof of the current vehicle owner. Proof and certificate of vehicle ownership transfer. Vehicle registration certificate, vehicle license. For vehicles under customs supervision, the "Certificate of Release from Supervision of the People's Republic of China Customs" or a customs-approved transfer certificate should also be submitted. For vehicles that have exceeded the inspection validity period, the vehicle safety technical inspection qualification certificate and the compulsory traffic accident liability insurance certificate should also be submitted. Precautions before handling vehicle transfer business: If the annual inspection period is approaching, the inspection qualification mark must be applied for first before handling the transfer. The existing license plate needs to be handed over to the vehicle management office, and dismantling tools should be prepared in advance.

8

4

Share

Do I still need to display the vehicle annual inspection sticker?

How to Reset the Tire Pressure Warning on a Sagitar?

How to Upgrade the In-Car Multimedia System?

Can Deformed Car Tires Cause Body Vibration?

How to Deal with Brake Failure While Driving?

Where is the manual transmission of the Roewe RX5 produced?

How long will it take for the vehicle transfer to expire after successful completion?

What Causes Moisture Inside the Car?

What is the reason for the occasional black screen on the Audi A6 display?

Do New Energy Vehicles Really Have Radiation?

Should I Refuel When There Are Two Bars of Fuel Left?