···
Log in / Register

Do 4S shops charge labor fees for maintenance?

6Answers
VanAaliyah
07/24/2025, 04:08:03 PM

4S shops do not charge labor fees for the first maintenance. The following is a detailed introduction to car maintenance items: 1. Engine oil and oil filter replacement. This is mainly for the maintenance of the lubrication system. The main function of the lubrication system is to effectively lubricate various parts of the car engine to prevent excessive wear. The function of the oil filter is to remove various impurities from the engine oil to ensure the normal operation of the lubrication system. The oil filter should be replaced together with the engine oil during an oil change. Under normal circumstances, the car needs to be maintained every 5000KM. 2. The function of the air filter is to filter the air before it enters the cylinder, removing impurities, dust, sand, and other foreign objects. The cleaning and maintenance of the air filter depend on the usage environment. The gasoline filter is generally replaced after driving 20000-25000KM. 3. Spark plugs are consumable parts and should be replaced every 20000KM. In addition, components such as brake fluid, transmission oil, battery, throttle, fuel injector, and brake pads are all inspection items during routine maintenance, and maintenance should be carried out according to the usage conditions.

Was this review help?
109
Share
DeCamille
08/10/2025, 05:16:38 AM

I usually enjoy studying car maintenance and often go to 4S shops for repairs. They do charge labor fees, which are essentially service fees calculated based on the actual time mechanics spend working. For example, tasks like changing engine oil or inspecting brakes each have estimated time allocations, multiplied by an hourly rate for the total cost. Fees may vary by shop, with first-tier cities possibly charging around 200 yuan per hour, while smaller cities may have lower rates. It's advisable to get a quote in advance and clearly review the breakdown of labor and material costs. If you want to save money, you can visit certified repair shops, where labor fees are usually cheaper. Remember, labor fees ensure service quality, preventing technicians from rushing through the job. I think understanding these details can help avoid being overcharged. Here's a little tip: regular maintenance can reduce cumulative labor fees.

Was this review help?
5
Share
Expand All
SanMiguel
09/26/2025, 12:33:15 AM

I'm someone who drives to work every day and have been to the 4S shop for maintenance several times. Their labor fee is charged as the staff's work compensation. After each maintenance, the bill is divided into labor fee and parts fee. For example, last time I replaced an air filter, the labor fee alone cost 150 yuan, plus the material fee, the total was not low. I think although it's a bit expensive, the technology is reliable, and the risk of car problems is small. Compared to independent repair shops, 4S shops are more standardized, but the prices are higher; it's recommended to make an appointment in advance and ask for detailed costs to avoid unexpected expenses.

Was this review help?
18
Share
Expand All
DeAdaline
11/09/2025, 01:36:47 AM

I was quite surprised when I went to the 4S shop for my first maintenance after getting my driver's license and buying a new car - they charged labor fees. This refers to the cost of manual labor, such as paying for half an hour's work to repair a component. When I saw the various labor fees itemized on my bill, I realized maintenance wasn't free and included various costs. Gradually I got used to it and understood this was normal practice; next time I'll check average prices online beforehand to have a rough estimate.

Was this review help?
7
Share
Expand All
VonGenesis
12/30/2025, 03:22:00 AM

I'm quite cost-conscious. 4S shops definitely charge labor fees, sometimes accounting for more than half of the total price. For example, a minor service might have labor fees of just one or two hundred, while major projects are even more expensive. I recommend comparing prices at chain stores; some large auto repair chains may charge only half the labor fees. The advantage of 4S shops is genuine parts and guarantees, but the cost is high. If you're on a budget, finding a reliable alternative can also solve the problem, provided you confirm the technicians' qualifications.

Was this review help?
19
Share
Expand All
MacEverly
03/27/2026, 10:33:13 PM

As a homemaker responsible for our family car's maintenance, when I take it to the 4S shop, they charge labor fees, which include the technicians' work costs. I think spending a bit more is worthwhile because safety comes first, especially ensuring thorough inspections when the kids are in the car. The cost varies depending on the service items—for example, inspecting the chassis might take 30 minutes and cost a few dozen yuan in labor fees. By inquiring about prices in advance, I can better manage the budget. Compared to regular repair shops, 4S shops handle details more meticulously.

Was this review help?
16
Share
Expand All
More Q&A

Why Do Tires Fall Off During a Car Collision?

Tires fall off during a car collision due to external force impact, tire damage, and improper vehicle usage. Hazards of tire detachment: It poses safety risks to the vehicle itself and the surrounding environment. The stability of a truck significantly deteriorates after a tire detachment, which can easily lead to loss of control and accidents. The detached tire may also force following vehicles to make sudden evasive maneuvers, severely disrupting their normal driving. Post-collision procedures: Move to a location that does not obstruct traffic to handle compensation matters independently. Report the incident to the police and your insurance company for damage assessment by the insurer and liability determination by traffic police.
119
Share

What are the new regulations regarding electric motorcycles?

New regulations for electric motorcycles include the cancellation of purchase tax, simplified licensing procedures, and reduced difficulty in driving tests. Electric motorcycle purchase tax: If an electric motorcycle is classified as a taxable vehicle, it is subject to approximately a 10% purchase tax. Electric motorcycle classification criteria: Speed exceeding 50 kilometers per hour. Classification of electric vehicles: Electric vehicles can be categorized by the number of wheels and structural type into electric bicycles, electric motorcycles, electric unicycles, electric four-wheelers, electric tricycles, and electric scooters. Based on power source, they can be classified as pure electric vehicles, range-extended electric vehicles, hybrid electric vehicles, and fuel cell vehicles. According to the method of power supply, they can be divided into two major categories: one that connects to an external power source to obtain electricity, and the other that uses fuel cells or energy storage devices (such as storage batteries or supercapacitors) as the power source. By drive type, they can be classified as pure electric vehicles, hybrid electric vehicles (series, parallel, and series-parallel), and fuel cell electric vehicles.
103
Share

Is It Dangerous to Drive Without the Fuel Tank Cap?

Driving without the fuel tank cap is dangerous. Driving without the fuel tank cap can easily lead to traffic safety accidents: The shaking and jolting of a gasoline vehicle while driving can generate small friction sparks or static electricity at any time, which may trigger safety incidents. Any exposure to open flames or static electricity poses a safety risk, endangering people nearby and potentially causing significant harm or hazards to the vehicle or other objects. Driving without the fuel tank cap can easily cause environmental pollution: Gasoline is a volatile substance. In summer, leaving the fuel tank cap open allows gasoline to evaporate easily, leading to excessive fuel consumption. Diesel fuel contains more impurities, and its combustion produces more smoke and dust, contributing to air pollution. The pollution caused by smoke and dust includes benzene compounds from gasoline, and leaving the cap off allows these compounds to evaporate, affecting the atmospheric environment.
106
Share

What does the P gear mean in a car?

P gear stands for the parking gear, which means the wheels are mechanically locked. P gear is used for parking on flat ground: The P gear is both a neutral gear and equipped with a braking mechanism, so its direct function is parking. When temporarily stopping on a level road, shifting to P gear puts the car's transmission in neutral operation, completely interrupting power transmission from the engine to the output shaft. The driver does not need to turn off the running engine during short waiting periods. P gear is used for parking on slopes: The core function of P gear is to achieve durable and safe slope parking for automatic transmission cars. When the vehicle is parked on flat ground, both automatic and manual transmission cars can be securely held in place for long periods using just the handbrake.
114
Share

What Causes the Front Wheels to Make a Rumbling Noise When Driving Slowly on Flat Roads?

The front wheels making a rumbling noise when driving on flat roads may be due to foreign objects stuck in the tire treads or a fault in the vehicle itself. Diagnosing Vehicle Faults: Check if any warning lights are illuminated on the dashboard. Hazards of Foreign Objects in Tire Treads: They can puncture the tire and cause a blowout. Small, hard, and sharp objects like stones stuck in the tires can easily puncture them, leading to air leakage and a rapid drop in tire pressure, which may result in a blowout. If this happens during high-speed driving, it could even cause the vehicle to lose control or overturn. Reduced tire drainage capability. The tread patterns on tires help quickly drain water when driving in rainy or snowy conditions. However, if the tires are filled with a large number of stones or other hard objects, their drainage efficiency will be significantly reduced. This can also affect the braking performance of the tires, increasing the likelihood of skidding. Especially when driving through waterlogged areas, the tires may even lose their grip.
102
Share

Where is the appropriate location to install the ETC device?

The ETC device is generally installed on the upper middle part of the front windshield for passenger vehicles, while for large vehicles such as trucks and buses, it is installed on the lower middle part. The suitable installation position should be no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 to 90 degrees. For vehicles with pre-installed or aftermarket explosion-proof film, which may affect the signal transmission of the microwave communication link, the device should be installed on the microwave sunroof strip. ETC stands for Electronic Toll Collection. To apply for ETC, the vehicle owner must provide their valid ID card and the original and photocopy of the vehicle registration certificate. If the application is made by a proxy, the proxy's valid ID card is also required. The photocopy of the vehicle registration certificate should include the page with the most recent annual inspection stamp. Additionally, a bank card for deducting highway tolls is needed, and the vehicle must be registered under the name of an individual aged between 18 and 60. For company vehicles, the required documents include: An introduction letter from the vehicle owner (with company seal); photocopy of the organization code certificate or business license (with company seal); original ID card of the proxy; original vehicle registration certificate; and the vehicle for which ETC is to be applied. Here are some considerations for installing ETC: Do not obstruct the driver's view; it is best to install it behind the rearview mirror: Many car models have a steeply inclined windshield, which can reduce the driver's field of vision. If ETC is installed without considering this, it may increase the driver's blind spot. Installing it behind the rearview mirror on the right side can help avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement, as it has a built-in solar panel for self-charging. Therefore, during installation, avoid the blackened areas on the windshield and positions that may block the solar panel. Once installed, do not remove it arbitrarily: The button in the middle of the adhesive is an anti-removal lever connected to a switch. After installation, the windshield will press the anti-removal lever in. If the device is removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. In such cases, the user must visit an ETC service point to unlock it. This mechanism is designed to prevent multiple vehicles from sharing one device. When using ETC, note the following: The ETC transaction sensing range is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters from the vehicle ahead to avoid automatic toll deduction for the preceding vehicle. The ETC lane recognizes vehicles at a speed of 20 kilometers per hour; driving too fast may result in failure to read the vehicle's device information, leading to toll deduction failure. When using a debit card linked to ETC, insufficient balance may also cause toll deduction failure.
112
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.