···
Log in / Register

Can you go straight when the left-turn lane is green?

6Answers
LeGrace
09/01/2025, 04:32:09 AM

You cannot go straight when the left-turn lane is green. Here is more information about green lights: 1. Reason: Going straight in a left-turn lane when the light is green violates the "Road Traffic Safety Law" for not driving in the designated lane, resulting in a fine of 20-200 yuan. 2. Correct approach: The correct approach is to continue driving in the direction specified by the original lane (either make a left turn or a U-turn), then look for an opportunity at the next entrance or exit to find your route, or make a U-turn to go around a large circle and return to the original road to continue driving. This is better than losing 2 points.

Was this review help?
106
Share
VanDante
09/14/2025, 12:09:31 AM

As a veteran driver with over twenty years of experience, I've seen many such incidents. When the left-turn lane has a green light, you absolutely cannot go straight! This is because the lane is specifically designed for left turns, and the green light only permits you to turn left. If you insist on going straight, not only is it illegal, but it can also cause serious accidents, such as collisions with straight-moving vehicles or rear-end accidents. I remember once seeing a guy do this at a highway entrance, and he ended up being fined and penalized by the traffic police. Driving requires following traffic signals and road signs—don’t cut corners to save a few meters, only to invite trouble. Safety comes first, and obeying the rules is fundamental. Lane purposes are clear: a green light in the left-turn lane means only left turns are allowed; going straight is a different matter. Develop good habits to ensure road safety—everyone’s well-being is what truly matters.

Was this review help?
4
Share
Expand All
DelHarrison
10/28/2025, 12:52:45 AM

I just got my driver's license not long ago, and I'm always very careful in such situations. The instructor repeatedly emphasized that when the left-turn lane has a green light, you must only turn left and absolutely cannot go straight. The reason is simple: the lane type determines your direction; the green light is for a specific action, and going straight violates traffic rules, which could result in being caught by cameras and fined, or even causing a scrape. When driving, I always remember what the rulebook says—this is called designated lane usage, and ignoring it increases risks. Once, I almost made a mistake, but fortunately, I remembered the reminder in time and avoided trouble. As a beginner, I suggest always observing the signals carefully and not taking risks. Following the rules is responsible for both yourself and others—after all, smooth roads and everyone's safety bring peace of mind. Simply obeying the rules ensures no mistakes.

Was this review help?
8
Share
Expand All
EllaLee
12/11/2025, 12:08:42 AM

When the left-turn lane signal turns green during driving, only left turns are permitted, and proceeding straight is strictly prohibited. This is a mandatory traffic safety regulation. Going straight could cause lane confusion, potentially leading to collisions or congestion. Drivers should understand the specific meaning of green signals: they authorize movement in a designated direction. Ignoring this may result in traffic violations and penalties. More importantly, it's a safety consideration—preventing accidents relies on self-awareness. Rules serve everyone's convenience. Please strictly adhere to traffic instructions while driving.

Was this review help?
16
Share
Expand All
OJuliette
01/31/2026, 01:13:43 AM

On urban roads, I often see reckless driving behavior. Some people take it for granted to go straight in a left-turn lane when the light is green, but this is completely wrong! From personal experience, I once witnessed a rear-end collision caused by such behavior on my way home from work, and the scene was terrifying. Strictly speaking, the lane is designed only for left turns, and the green light specifies the direction of operation. Going straight is a violation, which can easily lead to fines and endanger others. I recommend everyone to observe and learn more, cultivating good habits. Community traffic relies on rules. Maintain order to reduce problems.

Was this review help?
11
Share
Expand All
OJosie
04/25/2026, 06:53:45 PM

From the logic of the traffic system, it is absolutely forbidden to go straight when the left-turn lane has a green light. This is because traffic signals are set based on lane types, and going straight violates regulations, which may trigger violation cameras or intervention by traffic police. The underlying principle is the clear division of lanes to ensure smooth and safe traffic flow. I usually pay attention to these details to avoid unnecessary risks. Consequences of violations include fines and accidents; the correct approach is to enter the corresponding straight lane and wait for the signal. Details determine the level of safety.

Was this review help?
20
Share
Expand All
More Q&A

How much will the premium increase next year after a vehicle accident?

Detailed introduction to the premium increase ratio after a vehicle accident: 1. If the vehicle has one accident, the owner is at fault but the accident does not involve death, the premium for the second year will be the standard rate without any discounts. 2. If the vehicle has two or more accidents, the owner is at fault but the accident does not involve death, the premium will increase by 10%. 3. If the owner is involved in drunk driving or an accident involving death, the premium will increase by 30%. Claims process after a vehicle accident: 1. Report the accident. After the accident, you need to call the insurance company to report the claim. 2. Investigation. The insurance company will send someone to the scene to investigate and confirm the situation. 3. Damage assessment. The insurance company will notify an inspector to assess the damage at the scene. 4. Review. Submit the insurance policy and other required documents to the insurance company for review. 5. Settlement. If the review is approved and meets the claim conditions, the insurance company will proceed with the compensation.
111
Share

How to Use the Free Light Air Conditioner?

JEEP Free Light air conditioner usage method: First press the AUTO button, then rotate the temperature control knob to set the desired temperature. At this time, the air conditioner is in automatic constant temperature state and defaults to dual-zone control. Press the AUTO button again to turn it off. The following is an introduction to car air conditioning: Car air conditioning refers to the air conditioning device installed in the car, which can cool, heat, ventilate and purify the air in the compartment, providing a comfortable riding environment for passengers, reducing the driver's fatigue and improving driving safety. The car's air filter will have impurities after prolonged use, so cleaning and replacement are very important.
101
Share

Can You Shift Directly from D to L in an Automatic Transmission?

You can shift directly between them since both are forward gears. However, it's important to adjust the speed to around 60 km/h when shifting. Otherwise, if the speed is too high, it may cause a strong jerking sensation, excessive impact on the transmission, and reduce its lifespan. Below is an introduction to the various gears in an automatic transmission car: P (Parking) Gear: This is the "Park" gear, used when parking. After arriving at your destination or when parking for an extended period, shift the gear lever into this position. Note: The vehicle must be completely stopped before shifting into P gear. Shifting into P gear before the vehicle has fully stopped can damage parts of the automatic transmission. When in P gear, the wheels are mechanically locked, preventing the vehicle from moving forward or backward. Therefore, always use P gear when parking on slopes. Additionally, during short stops (e.g., at traffic lights), it's best not to shift into P gear to avoid severe transmission damage in case of a rear-end collision. R (Reverse) Gear: This is the "Reverse" gear, used when backing up. To reverse, press the safety button on the lever to shift into R gear. However, ensure the vehicle is completely stopped before shifting to avoid serious transmission damage. N (Neutral) Gear: This is the "Neutral" gear, also known as the neutral position. At traffic lights, you can shift into this gear and press the brake pedal. If the wait is long, it's advisable to engage the handbrake, allowing your foot to rest. A common misconception is that shifting into N gear while coasting downhill or at high speeds saves fuel. This is incorrect—it not only doesn’t save fuel but can also damage the transmission. D (Drive) Gear: This is the "Drive" gear, used for forward motion. Shift into this gear, press the accelerator, and the vehicle will move. In this gear, the transmission automatically shifts based on speed and throttle input. At traffic lights, you can remain in D gear while pressing the brake. For short waits, this is fine, but prolonged stops can raise transmission fluid temperature and degrade its quality. L (Low) Gear: This is the "Low" gear, used for low-speed forward motion. In this gear, the transmission operates only in low gear (equivalent to 1st gear in a manual transmission) and does not shift automatically based on speed. This gear is typically used for climbing or descending steep slopes. In low gear, the drive wheels deliver high torque, providing sufficient power for steep climbs. Prolonged braking can overheat brake pads, reducing braking effectiveness—a significant hazard on long or steep descents. Shifting into L gear uses the engine's low RPM to control the vehicle's speed, eliminating the need for constant braking. M (Manual) Gear: This is the manual mode, allowing the driver to manually shift gears up or down. It can be used for climbing or descending slopes and for quick overtaking. S (Sport) Gear: This is the "Sport" mode. In S gear, the car achieves instant acceleration, and the high engine RPM helps remove carbon deposits. Many automatic cars have an S gear. In Sport mode, the transmission shifts freely but delays shifts to keep the engine at high RPMs longer, maintaining low-gear, high-RPM operation for greater torque and acceleration—though at higher fuel consumption.
107
Share

How is tire dynamic balancing performed?

Tire dynamic balancing is performed as follows: 1. Remove the tire from the vehicle and secure it on the balancing machine. 2. Input the required values as prompted by the balancing machine. 3. Rotate the tire to read the dynamic balance deviation value. 4. Add balancing weights for correction. 5. Reinstall the corrected tire onto the vehicle, completing the dynamic balance correction. Dynamic balancing should be performed under the following circumstances: 1. After replacing a new tire or repairing following a collision accident. 2. When there is uneven wear on one side of the front or rear tires. 3. When the steering wheel feels excessively heavy or floats and shakes during driving. 4. When the vehicle veers to the left or right while driving straight. 5. Even in the absence of the above conditions, for maintenance purposes, it is recommended to perform dynamic balancing on new vehicles after 9 months of driving, and subsequently every six months or 10,000 kilometers.
106
Share

How often should a car's air filter be replaced?

According to the car's maintenance manual, it is generally recommended to replace the air filter every 20,000 to 60,000 kilometers. If the driving mileage is low, it is suggested to replace it every 12 months. The location of the car's air filter element varies depending on the intake form and the engine's structure. There are two types of air filters in cars: dry and wet. Dry filters are made of paper or organic materials, while wet filters are made of metal wire mesh. The function of the air filter: to filter out particulate impurities in the air, ensuring that sufficient clean air enters the cylinders and preventing airborne dust from being sucked into the engine, which could accelerate the wear of the piston group and cylinders. Air filter: It is a type of filter, also known as an air filter cartridge, air cleaner, or air element. It is mainly used in engineering vehicles, cars, agricultural vehicles, laboratories, sterile operating rooms, and various precision operating rooms. During operation, the engine inhales a large amount of air. If the air is not filtered, the suspended dust in the air will be sucked into the cylinders, accelerating the wear of the piston group and cylinders. Larger particles entering between the piston and cylinder can cause severe cylinder scoring, especially in dry and sandy working environments. The air filter is installed in front of the carburetor or intake pipe to filter out dust and sand from the air, ensuring that sufficient and clean air enters the cylinders. A dirty air filter: Using an excessively dirty air filter while driving can cause insufficient engine intake, leading to incomplete fuel combustion, resulting in unstable engine operation, reduced power, and increased fuel consumption. Therefore, it is essential to keep the air filter clean. The car air filter is a device that removes particulate impurities from the air, composed of one or several air-cleaning filter components. Its main function is to filter out harmful impurities in the air before it enters the cylinders, reducing early wear of the cylinders, pistons, piston rings, valves, and valve seats. Therefore, the air must pass through the fine filtration of the air filter before entering the cylinders. A dirty air filter can cause poor engine performance, excessive fuel consumption, and engine damage. When inspecting the air filter, if it is found to have minimal dust and light blockage, it can be cleaned by blowing compressed air from the inside out and reused. Excessively dirty air filters should be replaced promptly.
118
Share

What is the tire size specification for the Alto?

The tire size specification for the Alto is 155/65R14. In 155/65R14, the first number 155 represents the tire width of 155MM, 65 indicates the aspect ratio of the tire section is 65%, meaning the section height is 65% of the width, and 14 stands for the rim diameter of 14 inches. The middle letter "R" denotes a radial tire. Both the front and rear wheels of the Alto model feature a dynamic eight-spoke aluminum alloy design, and the spare tire is full-size. If you wish to replace the tires on your own, follow these steps: Retrieve the spare tire and jack, place the jack under the vehicle frame near the tire to be replaced, ensuring the jack contacts the metal part of the frame; Raise the jack until it supports the car, making sure the jack is positioned directly beneath the vehicle and is perpendicular to the ground; Remove the hubcap and loosen the nuts counterclockwise, but do not fully unscrew them—just enough to eliminate resistance. Keeping the tire on the ground when loosening the nuts for the first time ensures that the nuts turn, not the tire; Continue turning the nuts counterclockwise until they are loose, repeating this step for all lug nuts, then fully remove the nuts; Place the new tire on the wheel hub, carefully aligning the tire rim with the wheel bolts. Install the lug nuts and hand-tighten them until all nuts are snug. At this point, the tire replacement is complete. In addition to the model, tires also display the following common data: Tire cord material: Indicated by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, and ZG for steel radial cord tires. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters from A to Z represent certified speed ratings ranging from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Shows the rim size compatible with the tire for practical use, such as "Standard Rim 5.00F".
113
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.