
Yes, you can fit three car seats in a Chevy Colorado, but it's a tight squeeze that requires careful and specific types of car seats. The crew cab model is your only option, as the extended cab lacks full rear doors and sufficient space. The key challenge is the Colorado's rear bench width, which is narrower than a full-size truck like a Silverado.
The most critical step is selecting the right car seats. You will almost certainly need a combination of narrow-profile seats, often called "three-across" seats. Infant carriers with bases are generally too wide. Your best bet is to use three slim convertible seats or a mix of a narrow booster seat for an older child and two convertible seats for younger ones. Proper installation is non-negotiable; you will likely need to use the seat belts instead of the lower LATCH anchors, as the Colorado's outboard LATCH positions are too close together to accommodate three seats side-by-side.
| Car Seat Model | Type | Approx. Width | Key Feature for 3-Across |
|---|---|---|---|
| Diono Radian 3RXT | Convertible | 17 inches | Exceptionally narrow, steel frame |
| Graco SlimFit3 LX | Convertible | 19 inches | Compact design, rotates for easier loading |
| Chicco MyFit SE | Harness Booster | 18.5 inches | Slim profile for older kids |
| Clek Foonf | Convertible | 18.5 inches | Rigid LATCH for secure install |
| BubbleBum | Inflatable Booster | 12 inches (inflated) | Ultimate space-saver for occasional use |
Before committing, it is highly recommended to test-fit your specific car seats in the truck. The process can be frustrating and time-consuming, and you may find that while three seats fit, accessing the seat belt buckles in the center becomes difficult. For a family that frequently transports three children, a wider vehicle like a full-size crew cab truck or a large SUV would provide a more comfortable and practical long-term solution.

















We did it in our 2022 Colorado, but it was a puzzle. We had to get two Diono Radian seats for the twins and a simple booster for our oldest. Forget using the built-in LATCH hooks; we had to use the seat belts for all three. The passenger up front has to sit pretty far forward. It works for school runs, but I wouldn't want to take a long road trip like that. It's doable, but just barely.

As a salesperson, I see this often. The crew cab Colorado's spec sheet says it seats five, but three car seats push that to the limit. You'll need "three-across" specific seats—Diono and Graco make good slim ones. The center seat has no LATCH, so you'll be using the seat belt for installation. It's a capable truck, but if you have three young kids, most families find a full-size truck or a midsize SUV like a Pilot is a more comfortable fit for daily life.

From a safety perspective, the physical fit is only half the battle. The Colorado's rear seat is narrow, which can lead to "overhang" where car seats press against each other or the door panels, potentially compromising their integrity in a crash. Ensure each seat is installed tightly with less than one inch of movement at the belt path. If you must do this, consult a Child Passenger Safety Technician (CPST) to verify your installation is safe and correct for all three seating positions.

The Colorado is a great truck, but it's not a minivan. The back seat is best for two adults or two car seats comfortably. Trying to cram three in there means everyone is sacrificing space—the kids are squeezed together, the front passenger loses legroom, and it's a hassle to buckle everyone in. If this is a daily need, you'll be happier with a wider vehicle. If it's just for occasionally carpooling a third child, a narrow inflatable booster like a BubbleBum can be a temporary fix.


