···
Log in / Register

Can the Rear Window of Ora Black Cat Be Rolled Up and Down?

6Answers
LaCharlie
09/06/2025, 03:17:24 AM

Ora Black Cat's rear window cannot be rolled up and down. The rear window of Ora Black Cat adopts a snap-fit design, so it cannot be rolled up or down, and none of the Ora Black Cat models come with one-touch window control functionality. One-touch window control refers to a system where the car window glass can be controlled to roll up or down to the desired position with a single press of a button. If a car is equipped with one-touch window control, the driver can press and release the switch, and the car window will automatically fully open or close, avoiding distractions caused by operating the window and improving safety. One-touch window control also features an "anti-pinch" function to prevent the risk of pinching fingers. Generally, if a car window cannot be rolled up or down, it may be due to a circuit fault, the car battery being disconnected, or the window control circuit being disconnected during maintenance. In such cases, simply resetting the window system is usually sufficient. Window system reset method: Turn on the car's ignition switch, hold the window switch to keep the window in the rising position, wait for the glass to reach the top and continue holding for more than three seconds, release the switch and immediately press it again to keep the window in the descending position, wait for the glass to descend completely for more than three seconds, and then repeat the rising action once more. This will complete the reset of the window's rolling system.

Was this review help?
102
Share
Karl
09/18/2025, 02:57:12 AM

The rear window of the Ora Black Cat is indeed fixed and cannot be rolled up or down, which stems from its design philosophy as a two-door compact electric vehicle. Having test-driven this car myself, I found that the fixed glass structure of the rear window simplifies mechanical components, reduces costs, and enhances the overall sealing of the vehicle, effectively isolating external noise and dust. Cleaning is quite convenient, as the standard rear wiper can handle it. This design also improves safety by reducing the risk of accidental operation by children or component failures. In daily use, it's quite hassle-free, especially for urban commuting—opening and closing the front windows is sufficient for air circulation adjustment, and rear passengers can still enjoy good visibility through the fixed small windows. Overall, the fixed rear window of the Ora Black Cat is a standout feature that highlights its compact, efficient, and practical nature.

Was this review help?
7
Share
Expand All
LiamAnn
11/01/2025, 03:24:17 AM

As a long-time owner of a two-door car, I can confirm that the rear windows of the Ora Black Cat cannot be rolled down. This is a common practice among many compact electric vehicles, aimed at reducing weight and maintenance burdens. I find this design quite clever—it avoids the common failure issues of traditional roll-down windows, such as wire harness wear or motor malfunctions. Additionally, the fixed rear windows ensure driving stability, especially at high speeds where wind noise interference is minimized. While they don’t open for ventilation, the dual front-window system provides excellent airflow, and the rear seats feature integrated vents to maintain fresh air. It also lowers ownership costs by eliminating the need for additional inspections or replacement of window lift components. For me, this perfectly aligns with the Ora Black Cat’s positioning—an economical, reliable, and stylish urban commuter.

Was this review help?
19
Share
Expand All
VonAlejandro
12/15/2025, 02:32:14 AM

The rear windows of the Ora Black Cat are fixed in design and cannot be rolled up or down, which is quite common among small electric vehicles. I understand this stems from vehicle structure optimization to reduce weight and improve electric range efficiency. Fixed rear windows eliminate the need for complex lifting mechanisms, reducing potential malfunctions and making maintenance simpler. Additionally, they help enhance sound insulation, resulting in a quieter driving experience.

Was this review help?
4
Share
Expand All
LaArcher
02/04/2026, 03:24:42 AM

When traveling with my family in the ORA Black Cat, I noticed that the rear window is fixed and cannot be rolled up or down. Initially, I was concerned about stuffiness, but the actual effect was quite good. The design includes rear ventilation slots to ensure smooth airflow, and my child sits safely in the back seat without the danger of opening the window. Cleaning only requires regular wiping, eliminating concerns about aging window mechanisms. Overall, this fixed solution feels more reliable and reduces car maintenance hassles.

Was this review help?
3
Share
Expand All
SanMaggie
04/30/2026, 12:46:21 PM

The rear windows of the ORA Black Cat cannot be rolled down, featuring a static glass design, which is part of the new energy vehicle trend. I've experienced this during my commutes—the fixed design optimizes aerodynamics, reducing wind resistance and extending battery range. Compared to traditional roll-down windows, this solution is more eco-friendly and durable, minimizing material and energy waste. Additionally, it enhances cabin insulation, making the heating system more efficient in winter. Simply put, the fixed rear windows of the ORA Black Cat represent a smart and practical integration.

Was this review help?
19
Share
Expand All
More Q&A

What Does On-the-Road Price Mean?

On-the-road price refers to the total cost of purchasing a car and all the necessary legal procedures to drive it on the road (if it's a loan, the interest is calculated separately). The on-the-road price of a car is the sum of the purchase price, vehicle purchase tax, insurance, license plate fees, and other expenses. Below are the relevant details: 1. Calculation method: The calculation method for the new vehicle purchase tax is: (naked car price ÷ 1.17) × 10% (the current vehicle purchase tax rate is 10%). Note: The taxable price for taxpayers purchasing self-use taxable vehicles does not include value-added tax (VAT) (starting from May 1, 2018, the VAT rate for manufacturing, automobiles, and other industries was reduced from 17% to 16%, and the VAT rate for transportation, construction, basic telecommunications services, and agricultural products was reduced from 11% to 10%). 2. VAT: Since the purchase price in the special invoice for motor vehicle sales includes VAT, when calculating the vehicle purchase tax, the 17% VAT must first be deducted, i.e., the taxable price for vehicle purchase tax = invoice price ÷ 1.17, and then the vehicle purchase tax is calculated at a 10% rate.
113
Share

What are the symptoms of a blown engine head gasket?

When an engine head gasket blows, the following symptoms may occur: 1. Overheating: The main symptoms include weakened acceleration, a sputtering sound during acceleration when a cylinder is misfiring, a small amount of water being expelled from the exhaust pipe, white smoke emission, and if there is an oily liquid in the radiator, it indicates a coolant passage leak, while water in the engine oil indicates an oil passage leak. 2. Gas leakage: High-pressure and high-temperature gases may escape through the head gasket, leading to reduced engine power, stalling, or inability to operate at high speeds or under full load. 3. Oil leakage: Engine oil may leak from the head gasket, causing excessive oil consumption in the oil pan and potentially leading to engine issues such as crankshaft burning. 4. Coolant leakage: Coolant may leak from the head gasket, resulting in significant coolant loss, which can cause engine dry burning and cylinder deformation. 5. Coolant entering the oil pan: Significant coolant loss and emulsification of engine oil may occur, leading to crankshaft burning and engine dry burning, causing cylinder deformation. 6. Gas entering the oil pan: This can cause the breather to leak gas, resulting in poor lubrication of engine components such as the camshaft and rocker arms, and reduced engine power. 7. Gas entering the coolant system: This can cause the radiator to leak gas, leading to reduced engine power, poor cooling, and cylinder deformation.
115
Share

What are the names of the different parts of a car?

Automotive components can be divided into six major categories: engine parts, transmission system parts, braking system parts, steering system parts, running system parts, and electrical instrument system parts. Below is a related introduction to the various parts of a car: 1. Engine parts: throttle body, engine, engine assembly, oil pump, fuel injector, tensioner pulley, cylinder block, bearing shell, water pump, fuel injection, gasket, camshaft, valve, etc. 2. Transmission system parts: transmission, gear shift lever assembly, reducer, clutch, pneumatic and electric tools, magnetic materials, electronic components, clutch disc, clutch cover, etc. 3. Braking system parts: brake shoe, brake pad, brake disc, brake drum, compressor, brake assembly, brake pedal assembly, master cylinder, wheel cylinder, ABS-ECU controller, electric hydraulic pump, brake camshaft, etc. 4. Steering system parts: steering gear, steering knuckle ball joint, steering wheel, steering gear, booster assembly, tie rod, etc. 5. Running system parts: rear axle, air suspension system, balance weight, steel plate, tire, leaf spring, axle shaft, shock absorber, wheel assembly, axle bolt, axle housing, frame, assembly, front axle. 6. Electrical instrument system parts: sensor, car lamp, buzzer, spark plug, battery, wiring harness, relay, audio, alarm, regulator, distributor, starter (motor), one-way clutch, car instrument, switch, fuse, etc.
115
Share

Why does the Besturn B50 make a buzzing sound when turning the steering wheel?

Besturn B50 makes a buzzing sound when turning the steering wheel for the following reasons: Engine abnormal noise: Symptom description: There are many possibilities for abnormal noise in the engine compartment. Most people judge the source of the noise as coming from the engine compartment, usually a sharp metallic sound or a wind-like noise. Solution: Engine abnormal noise indicates that the technical state of a certain mechanism in the engine has changed. It is mainly caused by excessive wear of some parts or improper assembly and adjustment. Some abnormal noises can even predict potential catastrophic damage to the engine. Therefore, when abnormal noise occurs in the engine, it should be repaired in time to prevent the fault from expanding. It should be reminded that if the abnormal noise comes from inside the engine, most car owners cannot solve it by themselves, and it is best to send it to a factory for inspection and repair. Transmission abnormal noise: Symptom description: If there is a "rustling" sound inside the transmission while driving, and the sound disappears when the clutch or accelerator is pressed, and there is a sound similar to whistling when shifting gears. Solution: The transmission has many parts, and the causes of abnormal noise are also relatively complex. When analyzing and judging, pay attention to: whether it is related to a specific speed, such as some planetary gears making noise that is more obvious at around 50Km/h. Whether it is related to certain gears, which is very important for judging transmission faults. If a certain gear makes noise, it must be related to the parts that affect the transmission of that gear; if all gears make noise, it is often a fault of the constant-mesh gear shaft or insufficient transmission oil. Whether it is related to specific actions, such as shifting gears, starting, rapid acceleration, rapid deceleration, turning, etc., are all effective means to judge abnormal noise. Among them, changing speed and direction are particularly important for judging rear axle faults. If the transmission abnormal noise is obvious, it is recommended to send it to a professional repair shop to check the faulty parts and then replace them. Wear abnormal noise: Symptom description: When stepping on the accelerator or brake while driving, there are always some abnormal noises from certain parts of the body. The sound is not loud and does not affect normal driving, but it always makes people worry about where the fault is.
109
Share

How Many Years of Use Qualify a Car as Scrap?

For domestic 5-seat sedans and 7-seat SUVs, as well as non-commercial small and mini vehicles, there is no mandatory scrapping age. However, when the mileage reaches 600,000 kilometers, the state will guide the vehicle to be scrapped. In addition to the above-mentioned vehicles, small and mini non-commercial passenger vehicles, large non-commercial sedans, and wheeled special machinery vehicles also have no usage age limit. Common scrapping regulations for commercial vehicles: Small and mini taxi passenger vehicles have a scrapping age of 8 years, medium-sized taxi passenger vehicles have a scrapping age of 10 years, and large taxi passenger vehicles have a scrapping age of 12 years. Public bus passenger vehicles have a scrapping age of 13 years, other small and mini commercial passenger vehicles have a scrapping age of 10 years, and large and medium-sized commercial passenger vehicles have a scrapping age of 15 years. Mini commercial trucks have a scrapping age of 8 years, while light and large commercial trucks have a scrapping age of 10 years. Vehicle scrapping process: The vehicle owner applying for scrapping and renewal must fill out one copy of the "Application Form for Vehicle Modification, Transfer, Alteration, Suspension, or Scrapping" and affix the owner's seal. Apply at the registration acceptance counter, where a "Vehicle Scrapping Notice" will be issued for vehicles that have reached the scrapping age. For vehicles that have not reached the scrapping age, the vehicle inspection counter will determine if they meet the scrapping standards and issue a "Vehicle Scrapping Notice" if applicable. The vehicle owner can then choose a qualified recycling company to dismantle the vehicle, presenting the "Notice". The recycling company will dismantle the vehicle and take photos after verifying the "Notice". The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. The vehicle owner must submit the "Modification Form", "XX Province Vehicle Renewal Technical Appraisal Form", "Scrap Vehicle Recycling Certificate", and photos of the dismantled vehicle to the vehicle inspection counter for verification and signature. The license plates and certificates will be reclaimed, and the scrapping registration will be processed according to regulations.
120
Share

Main Test Content of Subject 3?

Subject 3 test content is as follows: 1. Preparation before starting: Candidates must follow the safety officer's instructions, approach the vehicle, walk around it (from the left front door to the back), and confirm safety before opening the door to get in. After entering, first adjust the seat to a suitable position, adjust the interior and exterior rearview mirrors, and fasten the seat belt. Then perform fingerprint verification; the fingerprint scanner is located below the left air vent on the steering wheel. 2. Starting: Upon hearing the voice prompt "Please start," press the clutch, shift into first gear, turn on the left turn signal (for more than 3 seconds), and observe the left rearview mirror (turning head left) to confirm safety. Then honk, release the parking brake, start smoothly, and turn off the turn signal. 3. Right turn at an intersection: Upon hearing "Right turn ahead," turn on the right turn signal (for more than 3 seconds) and follow the guiding arrow to turn right into the driving lane. 4. U-turn: Upon hearing "U-turn ahead," turn on the left turn signal (for more than 3 seconds), observe the left rear traffic via the (left) rearview mirror, and confirm safety before reducing speed, shifting to a lower gear, and entering the U-turn zone. While entering, observe traffic conditions left and right, confirm safety, enter the new lane, proceed normally, and turn off the left turn signal. 5. Straight through an intersection: Upon hearing "Pass the intersection ahead," slow down (brake), observe road traffic, and proceed according to traffic signals. Speed should be below 30km/h, and stopping within the intersection is prohibited. 6. Left turn at an intersection: Upon hearing "Left turn ahead," turn on the left turn signal (for more than 3 seconds) and follow the guiding arrow to turn left into the driving lane. 7. Passing a bus stop: Upon hearing "Pass the bus stop," slow down (brake) or keep speed below 30km/h before entering the area. Observe left and right (turning head) to yield to buses and pedestrians, and proceed after confirming safety. 8. Gear shifting: Upon hearing "Please perform gear shifting," shift to 2nd gear, then sequentially upshift to 5th gear (exceeding 40km/h in 5th), then downshift back to 2nd. 9. Straight driving: Upon hearing "Maintain straight driving," look ahead, hold the steering wheel with both hands, and keep the vehicle straight. Do not cross lane dividers. 10. Lane change: Upon hearing "Change lanes," turn on the (left) turn signal (for more than 3 seconds), observe rear traffic via the (left) rearview mirror (turning head left), and confirm safety before turning (left) to change lanes. If conditions are not met, slow down and wait. Do not change two lanes consecutively. 11. Passing a crosswalk: Upon hearing "Crosswalk ahead," slow down (brake) or keep speed below 30km/h before entering. If pedestrians are crossing, stop outside the safety line and proceed only after they have crossed. 12. Passing a school zone: Upon hearing "School zone ahead," slow down (brake) or keep speed below 30km/h before entering. Observe left and right (turning head) to yield to students, and proceed after confirming safety. 13. Pulling over: Upon hearing "Please pull over," turn on the right turn signal (for more than 3 seconds), observe right rear traffic via the (right) rearview mirror, and confirm safety before parking parallel to the curb (or road edge solid line) within 30cm without touching it. Stop the vehicle, engage the parking brake, and shift to neutral.
104
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.