Can the Dongfeng HUV be launched in 2021?

2 Answers
Eileen
07/24/25 2:10am
Dongfeng HUV will not be launched in 2021. Known as the "domestic Hummer," the Dongfeng HUV features a very rugged exterior, with sharp and angular body design that delivers strong visual impact. The side profile adopts a floating roof design, with smooth and dynamic lines, while the rear end has a square and full shape, giving a sense of solidity and reliability. Below is an introduction to the Dongfeng HUV: 1. Interior: The four-spoke steering wheel is very eye-catching, paired with cannon-style mechanical instrument clusters that exude a sporty feel. The dashboard is wrapped in large areas of soft plastic, and the central control screen and air vents, enhanced by silver chrome trim, blend ruggedness with fashion, giving the cabin a high-end feel. 2. Powertrain: The vehicle is equipped with a 180 kW 2.0T four-cylinder turbocharged diesel engine, mated to a 5-speed manual transmission, and comes with a four-wheel-drive system. It is expected that the production version will also offer a gasoline variant paired with an automatic transmission.
Was this review help?
19
2
Share
StBrianna
08/10/25 9:45pm
I remember back in 2021, many car enthusiasts were discussing whether the Dongfeng HUV would actually hit the market. As someone who has been following it since the 2012 Beijing Auto Show, I can confidently say that it never entered mass production that year. This vehicle remained stuck in the concept phase, with no traceable Ministry of Industry and Information Technology filing information, indicating that R&D progress had stalled. At that time, the manufacturer focused mainly on new energy vehicles and commercial vehicles, as this type of hardcore off-roader belonged to a niche market. In reality, transitioning from a concept car to mass production requires solving platform adaptation and supply chain issues—just look at its exposed hinge door design, and you’ll realize the production challenges were significant. Now, in 2024, even spy shots of test vehicles are extremely rare, suggesting the project was likely shelved long ago. If you’re looking to buy an off-roader, the Tank 300 actually made it to market and, surprisingly, became a hot seller.
Was this review help?
5
0
Share
Expand All
More Forum Discussions

What is the introduction of the 8th generation Accord automatic transmission?

The introduction of the 8th generation Accord automatic transmission is as follows: 1. P (Parking) gear: The P gear is the parking gear, used when the vehicle is parked for a long time. It utilizes a mechanical device inside the transmission to lock the rotating parts of the car, preventing movement. For automatic transmission models, it is necessary to first engage the handbrake and then shift into P gear; otherwise, the mechanical parts of the automatic transmission may be damaged. 2. R (Reverse) gear: The R gear is the reverse gear, used when the vehicle needs to move backward. When the gear lever is in R gear, the hydraulic system's reverse gear circuit is engaged, causing the drive wheels to rotate in reverse for backward movement. To operate, the brake must be pressed, and the shift lock on the gear lever must be pressed before moving the lever to R gear. It is important to note that the R gear should not be forcibly engaged when the vehicle has not completely stopped, as this may damage the transmission. 3. N (Neutral) gear: The N gear is the neutral gear, used when the vehicle is parked for a short time without turning off the engine, such as when waiting at a red light or in traffic. When in N gear, the engine's power is not transmitted to the wheels, and pressing the accelerator will not move the vehicle. 4. D (Drive) gear: The D gear is also known as the forward gear or drive gear. When the gear lever is in D gear, the vehicle will automatically shift gears based on throttle opening and speed data. This gear is suitable for normal road driving, and the driver can control the speed by adjusting the accelerator pedal. 5. S (Sport) gear: The S stands for Sport mode, allowing the vehicle to accelerate quickly, suitable for overtaking and climbing hills.
6
2
Share

What Causes Blue Smoke from the Exhaust Pipe?

Blue smoke from the exhaust pipe indicates severe oil burning. When this occurs, you should immediately check the cause of the oil burning and proceed with repairs. Engine oil burning is relatively common, but when it reaches the point of emitting blue smoke, it becomes very serious. Immediate repair is necessary in such cases, as prolonged neglect can cause significant damage to the engine. Engine oil is often referred to as the lifeblood of the engine, serving not only as a lubricant but also providing cleaning, sealing, buffering, rust prevention, and heat dissipation functions. Without oil, the engine cannot operate properly. During engine operation, oil forms a protective film on the surfaces of various components, preventing direct contact and friction between them.
11
0
Share

How to Clean Tar Spots on a Car?

Methods for cleaning tar spots on a car: 1. Specialized automotive tar remover: Tar removers are commonly used products in car detailing, mainly for cleaning organic hydrocarbons such as tar and pitch; 2. Organic solvent cleaning: If scrubbing is difficult to remove, organic solvents can be used, but be sure to choose solvents that do not dissolve the paint, such as alcohol-based or benzene-based solvents. The main component of tar is hydrocarbons, which are insoluble in water but soluble in carbon disulfide. Therefore, washing the car won’t remove tar spots from the paint, and rubbing hard with a towel is not only ineffective but also risks scratching the paint.
15
0
Share

Is the Car's Recirculation Light On or Off?

When the car's recirculation light is on, it indicates that the recirculation mode is activated. The primary function of recirculation is to promptly and effectively prevent external dust and harmful gases from entering the vehicle. For example, when driving through areas with smoke, dust, unpleasant odors, or in heavy traffic, it blocks harmful exhaust emissions from vehicles ahead. The role of the external circulation mode is to replenish fresh air, while recirculation mode isolates the vehicle from outside polluted air. In recirculation mode, the airflow passage between the inside and outside of the vehicle is closed. Without the fan turned on, there is no airflow circulation. When the fan is on, the airflow drawn in comes solely from inside the vehicle, creating an internal airflow circulation within the car.
8
3
Share

How to Turn on the Vehicle's External Air Circulation?

To activate the external air circulation in a vehicle, you can directly press the button on the central control panel. The symbol for the external circulation button is an arrow pointing from the outside of the front windshield into the car, while the internal circulation button symbol is an arrow making a circle inside the car. Generally, external circulation can be turned on when driving on highways, while internal circulation is suitable for city roads. The external air circulation draws outside air into the car, similar to opening the window for ventilation, but it filters out impurities and harmful gases from the external air, preventing them from entering the cabin and polluting the environment. Internal circulation, on the other hand, recirculates the air inside the cabin. In harsh conditions such as traffic jams or sandstorms, internal circulation helps maintain airflow inside the car, prevents stuffiness, and blocks external pollutants and harmful gases from entering.
13
0
Share

What is the tire model of the Tayron?

The tire model and size of the Tayron are mainly divided into three categories: 1. The tire model and size for the Tayron Comfort version is 215/65/R17; 2. The Luxury and Premium versions use 235/55/R18 tires; 3. The R-Line and Flagship versions are equipped with 235/50R19 tires. Below is relevant information about car tires: 1. When the tire surface wears down to the position of the triangular indicator, it should be replaced promptly to prevent safety hazards. 2. After replacing or repairing tires, it's essential to perform a four-wheel alignment and dynamic balancing to prevent abnormal vibrations during high-speed driving. Additionally, avoid driving at high speeds over potholes to prevent tire blowouts.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.