Can Temporary License Plates Be Renewed Online?

Has the fuel tank noise issue of the Geely Xingrui been resolved?

There is currently no solution for the fuel tank noise issue in the Xingrui. Relevant information is as follows: Introduction: As the first model of Geely's 4.0 era, the Xingrui carries the important mission of Geely's high-end transformation. After its launch, it quickly became a dark horse in the market with its "disruptor" stance, featuring a size comparable to mid-size cars, a 2.0T high-performance engine, and a price similar to compact cars. Powertrain: The most notable highlight of the Xingrui is its powertrain, which includes the same Volvo 2.0TD T4 engine, delivering a maximum power of 190 horsepower and a maximum torque of 300Nm.

116

Share

What are the differences between the Land Cruiser and the Highlander?

The differences between the Land Cruiser and the Highlander are as follows: Different manufacturers: The Land Cruiser is manufactured by FAW Toyota; the Highlander is manufactured by GAC Toyota. Different dimensions: The Land Cruiser measures 5015mm in length, 1930mm in width, and 1750mm in height, with a wheelbase of 2790mm; the Highlander measures 4890mm in length, 1925mm in width, and 1720mm in height, with a wheelbase of 2790mm. Different fuel consumption: The Land Cruiser has a fuel consumption as low as 4.9L per 100km; the Highlander has a fuel consumption of 11.4L per 100km.

108

Share

What is the ground clearance of the Nissan Sylphy?

Nissan Sylphy has a ground clearance of 165cm, which is relatively low. Relevant details are as follows: Tires: The tire size of the Nissan Sylphy is somewhat unconventional. The diameter of the 195/60R16 tires is slightly larger than that of the 195/65R15 tires, resulting in a half-wheel height of 31.5cm, making it one of the tallest among the 16 compact car models. Cabin: The lowest point of the Sylphy's cabin height is 39.5cm, slightly higher than most models, but its exhaust pipe height is only 25.5cm, the lowest among several common compact cars. Drivers may need more precise throttle control to overcome potential exhaust blockage. These specific height parameters primarily reflect the vehicle's wading performance.

103

Share

What does the highway toll ETC mean?

Highway ETC (Electronic Toll Collection) translates to electronic toll collection, which is a non-stop toll collection system. On highways, there will be one or more ETC lanes. ETC toll collection method: Through microwave-specific short-range communication between the RFID tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station, the system uses networked technology to conduct background settlement processing with the bank, thereby achieving the purpose of vehicles passing through bridge toll stations without stopping to pay tolls. Banks install this type of ETC express card with a post-payment system. ETC application conditions are as follows: Provide the original and photocopy of the vehicle owner's valid ID card and vehicle registration certificate. The photocopy of the driver's license must include the page with the most recent annual inspection seal. Credit card application form. This credit card is used to bind the ETC card. After obtaining the credit card, swipe it twice and present the POS slip to the designated outlet to receive and install the ETC onboard device for free, with no additional charges. Must be between 18 and 60 years old. Must own a vehicle under personal name. Below are the precautions for installing ETC: Do not obstruct the view. It is best to install it behind the rearview mirror: Many car models have a large inclination angle of the windshield, resulting in a smaller driver's field of vision. If ETC installation does not consider this, it will increase the driver's blind spots. Install it on the right side behind the rearview mirror to avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement because it has a solar panel on the back for self-charging. Therefore, during installation, avoid the blackened areas on the windshield and positions that may block the solar panel. Once installed, do not remove it arbitrarily: The button in the middle of the adhesive is an anti-removal lever connected to a switch. After installation, the windshield will press the anti-removal lever in. If removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable, requiring a visit to an ETC service point for unlocking. This is designed to prevent multiple vehicles from sharing one device. Precautions for using ETC: The ETC transaction sensing range is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters from the vehicle in front to avoid automatic sensing and paying for the vehicle ahead. The ETC lane recognition speed is 20 kilometers per hour. Excessive speed may prevent reading the vehicle device information, leading to failed toll deduction. When using a debit card bound to ETC, insufficient balance may also cause toll deduction failure.

104

Share

What are the differences between the 153 rear axle and the 457 axle?

The specific differences between the 153 rear axle and the 457 axle are as follows: 1. Bearings: The 457 axle has enlarged bearings, but its load capacity remains the same as the 153. According to parameters, the 153 is a Dongfeng 10-ton axle, while the 457 is a 13-ton axle, and the 457 definitely has a stronger load-bearing capacity than the 153. The 435 axle is a 10-ton axle with eight half-shaft bolts and six drive shaft threads, whereas the 457 axle is a 13-ton axle with ten half-shaft bolts and eight drive shaft threads. 2. Diameter: For the 457, this number indicates that the pitch circle diameter of its driven gear is 457mm, 485mm, or 498mm, with varying output torque—the 457 can reach 45,000 N·M. In fact, there are many factors that affect load-bearing capacity, including the main and driven gears, axle housing, half-shafts (for example, single-stage axles are prone to breaking, so engineering vehicles generally use Steyr and Mercedes wheel-reduction axles), etc. (Heavy loads also involve components like brakes.) The 153 axle, with a driven gear pitch circle diameter of 435mm, was originally introduced by Dongfeng using Nissan Diesel technology, with a 5T front axle and a 10T rear axle, installed on Dongfeng's original 153 model, hence the name 153 axle.

113

Share

What Causes the Engine Warning Light to Illuminate in the Baojun 360?

The main reasons for the engine warning light to illuminate in a vehicle include sensor issues, engine misfires, maintenance problems, fuel quality issues, poor combustion of the air-fuel mixture, engine intake problems, turbocharging issues, exhaust problems, and anti-theft system malfunctions. Additionally, during vehicle startup, the system performs a self-check on the engine. Normally, the engine warning light should turn off after the self-check is completed. If it remains illuminated for an extended period, it is advisable to promptly visit a repair station for professional assistance to diagnose and eliminate potential safety hazards. Below is a detailed explanation of each type of fault: Sensor Issues: Sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors can cause the engine warning light to illuminate if they are damaged, have poor connections, or experience signal interruptions. This prevents the vehicle's ECU from accurately obtaining engine data. Solution: Seek professional inspection at a repair center to promptly address safety concerns. Maintenance Issues: Poor engine maintenance is one of the most common causes of the engine warning light illuminating. Vehicles have specific maintenance schedules, and failure to adhere to these schedules, combined with poor driving habits, can increase the burden on the engine, eventually triggering the warning light. Solution: Follow the maintenance schedule outlined in the vehicle's manual, including time or mileage intervals, to ensure comprehensive maintenance and eliminate non-maintenance-related issues. Fuel Quality Issues: This refers to both fuel and engine oil. Vehicles require specific fuel grades and types of engine oil (semi-synthetic or fully synthetic). If the recommended fuel or oil is not used, prolonged use can lead to engine wear and trigger the warning light. Solution: Use the recommended fuel grade and appropriate engine oil for the vehicle. Poor Combustion of the Air-Fuel Mixture: Issues such as faulty spark plugs, fuel pump malfunctions, or clogged fuel lines can lead to poor combustion of the air-fuel mixture. This results in engine carbon buildup or knocking, which the oxygen sensor detects and reports to the ECU, causing the warning light to illuminate. Solution: Inspect the engine ignition coils and spark plugs. Check the performance of relevant sensors, such as oxygen sensors (front and rear), coolant temperature sensor, intake temperature sensor, throttle position sensor, air flow meter, and intake manifold pressure sensor. Inspect the air filter for contamination—if clogged, it can cause an overly rich mixture, requiring cleaning or replacement (as needed). Check for fuel injector leaks and the performance of the fuel pressure regulator, as malfunctions can also lead to an overly rich mixture. Intake Issues: During combustion, the engine requires air intake, making the air filter crucial. A dirty or uncleaned air filter can obstruct airflow, potentially leading to blockages and, in severe cases, triggering the engine warning light. Solution: Regularly clean or replace the vehicle's air filter to ensure proper intake system operation. Turbocharging Issues: Problems with the intake boost piping or turbocharger can also cause the engine warning light to illuminate. Common issues include turbocharger damage, accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Solution: Visit a 4S shop for inspection and replacement of the turbocharger. In most cases, repairs are not cost-effective, and replacement is recommended. Exhaust Issues: Faults in the rear oxygen sensor, catalytic converter, exhaust camshaft, or bearings can trigger the warning light. The most common issue is catalytic converter failure, often caused by physical damage or fuel system malfunctions. Solution: Use lead- or silicon-based lubricants to maintain and clean the catalytic converter. Anti-Theft System: If the vehicle's anti-theft system malfunctions or if the anti-theft controller is incompatible with the engine ECU, the engine may not operate correctly, and the warning light may illuminate. Solution: Visit a professional repair shop for a systematic diagnosis, as this issue cannot be resolved independently. Engine Misfire:

106

Share