···
Log in / Register

Can I Wait for the 12-Point Deduction to Reset Automatically?

6Answers
VonConnor
07/29/2025, 05:28:10 PM

You cannot wait for the 12-point deduction to reset automatically. Here are the relevant details: 1. 12-point deduction: Drivers who accumulate 12 points must attend a study session and retake the subject one test at the vehicle management office where the driver's license was issued or where the violation occurred. Only after passing the test can the points be reset. Otherwise, the driver's license cannot be used normally. 2. Less than 12 points: If the accumulated points in a scoring cycle are less than 12, the scoring system will automatically reset the points from the previous cycle at the start of the next cycle. The cumulative scoring cycle for road traffic safety violations is 12 months, with a maximum of 12 points, calculated from the date the driver's license was first issued.

Was this review help?
112
Share
AdalynnRose
08/15/2025, 04:19:11 PM

As an experienced driver with years of driving under my belt, I must say waiting for 12 penalty points to automatically reset is completely unacceptable. The driver's license point system isn't a simple countdown timer; once you accumulate 12 points, the traffic authorities will immediately suspend your license. You'll need to personally attend a safety education course (usually lasting one week) and pass a traffic regulations test to regain your driving privileges. If left unaddressed, not only could your license be revoked, but continuing to drive would constitute unlicensed operation - exposing you to fines, detention, or even legal consequences. I've witnessed cases where people delayed action and faced serious trouble. Safety should always come first. My advice: take immediate action when you hit 12 points instead of gambling with time. This proactive approach can also help you develop better habits to avoid future penalties.

Was this review help?
8
Share
Expand All
EliLee
10/16/2025, 11:56:33 PM

I've driven and experienced similar situations before, so let me tell you—don't naively think you can just wait for the 12-point deduction to reset. Hitting 12 points on your license automatically triggers a suspension mechanism. You'll need to report to the traffic management station for mandatory education and testing to clear the points. During the waiting period, you can't drive. If you're caught driving anyway, it counts as unlicensed driving, leading to even heavier fines and point deductions. I tried it myself—ended up obediently taking the course and test, which turned out to be quite practical. Now I drive much more carefully. Handling it early saves trouble; don't delay and make things worse for yourself. Safety first—watch traffic videos before driving to avoid repeated violations.

Was this review help?
14
Share
Expand All
JudahDella
11/29/2025, 11:40:25 PM

You cannot wait for the points to be automatically cleared after accumulating 12 penalty points on your driver's license. Regulations require you to attend traffic rule courses and pass the exam to reinstate your license. If left unaddressed, your license will be suspended, and driving poses high risks. It is recommended to directly contact the administrative authorities to make arrangements. The process is straightforward—don't delay and affect your daily life.

Was this review help?
11
Share
Expand All
DeAsher
01/20/2026, 01:02:21 AM

It's not advisable to wait for the 12-point deduction to reset while driving, as your driver's license will be suspended. You must attend educational training and pass the exam to clear the points. Continuing to wait only invites trouble, potentially leading to license revocation or penalties for driving without a valid license. Having driven for ten years, I've found that addressing the issue promptly actually saves hassle. Reflect on your driving behavior, such as avoiding speeding or illegal parking, to reduce future point deductions. Prioritizing safe travel is essential—take action promptly to protect yourself and others.

Was this review help?
16
Share
Expand All
AliviaMarie
04/16/2026, 01:49:08 AM

Once I got 12 points deducted for running a red light. At first, I naively thought the points would reset to zero after half a year. However, upon checking, I learned that I had to take a course and pass an exam; otherwise, my driver's license would become invalid. I promptly attended the classes at the traffic center, passed the exam easily, and had my points reset. Delaying action only increases the risk to your license and makes driving more stressful. My advice: if you max out your points, take immediate action—don’t waste time. The process isn’t complicated, and it can even enhance your safety awareness.

Was this review help?
9
Share
Expand All
More Q&A

What are the gear positions of the BMW 5 Series?

Here is a detailed introduction to the gear positions of the BMW 5 Series: 1. P (Park): This gear is usually located at the top of the gear lever. It should be engaged when parking for an extended period. If the vehicle is turned off without engaging the park gear, the park gear should be engaged before starting the vehicle next time. 2. R (Reverse): This gear is used for reversing. It can only be engaged after the vehicle has come to a complete stop by pressing the brake. It cannot be engaged while driving. 3. N (Neutral): The torque converter is in an idle state, and power cannot be transmitted to the planetary gears. Neutral is used for short-term parking. 4. D (Drive): This gear is used for driving forward and is located below the neutral position. 5. S (Sport): Sport mode is mainly used for aggressive driving. In this mode, the engine's performance is optimized, but fuel consumption will increase.
111
Share

What is the function of the CRV center console buttons?

Here is a detailed introduction to the CRV center console buttons: 1. Electronic Stability Control (ESC): The system is enabled by default. It is not recommended to turn it off except on slippery roads such as during rain or snow. 2. Parking Radar/Image: The central control screen displays the image while the radar provides an audible warning. 3. Blind Spot Warning System: When there are other vehicles in the blind spots on either side of the rear, the indicator lights on the rearview mirrors will flash to alert the driver not to change lanes. If the driver does not notice the flashing lights and attempts to change lanes, the system will emit a warning sound. 4. Forward Collision Warning System: When the distance between your vehicle and the vehicle ahead is too close, the system will sound an alarm to alert the driver. If the driver does not take action, the system will automatically apply the brakes to stop the vehicle.
102
Share

Why Does Frost Form on Car Windows in Winter?

The reasons for frost forming on car windows in winter are as follows: 1. The primary cause of frost inside the car during winter is the temperature difference between the interior and exterior of the vehicle. 2. Because the temperature inside the cabin is higher than outside, the car windows come into contact with the colder external environment, causing the moisture inside the cabin to condense on the inner windshield, forming frost. When the moisture in the warm air approaches the cold glass, it cools down and condenses into frost. Frost typically forms in winter or during cold mornings and evenings. Here are some solutions to prevent frost on car windows in winter: 1. Start the engine and wait for a while. If you notice frost on the car windows, you can first start the engine and let it warm up for a bit. 2. Turn on the fan and adjust it to the warm air setting. After starting the car engine, you can turn on the fan, set it to warm air, and adjust the fan position to direct airflow toward the front windshield.
111
Share

How to Clean Car Wiper Blades?

Cleaning wiper blades can be done using the following methods: 1. Utilize wiper fluid effectively: Wiper fluid can quickly remove stubborn stains, oil marks, rain marks, etc., from the windshield and form a protective film to prevent dust and oil from adhering. Its special ingredients also create a protective layer on the wiper rubber, preventing it from drying out. When using wiper fluid, note that ultra-concentrated types only require dilution with water, typically at a ratio of 1:15, and no additional additives are needed after mixing. 2. Refurbish with water sandpaper: First, immerse the wiper blade and sandpaper in water together, wait for one minute, then remove and sand the wiper blade. Pay special attention to smoothing out the rubber strip in the wiper blade, which can effectively refurbish it. 3. Use rubber protectant to extend wiper life: Currently, wiper rubber protectants on the market resemble Parker pens and are often included as free gifts with wiper fluids and other cleaning products. When applied to the wiper rubber, the protectant increases the lubrication of the wiper blade and enhances its elasticity.
110
Share

What kind of adhesive should be used for a fallen car door trim strip?

For a fallen car door trim strip, 3M adhesive should be used. In the automotive industry, 3M adhesive is widely applied in various areas such as doors, air conditioning systems, car audio and electrical appliances, navigation systems, radios, engine covers, interior and exterior trim bonding, wire harness fixation, brand logo attachment, structural reinforcement and rust prevention, as well as vibration damping and noise reduction. Advantages of 3M adhesive: strong bonding, easy application, cost and material savings, and reduction in processing steps such as drilling and welding. For example, 3M DP818 adhesive bonds metals with an effect equivalent to welding, effectively enhancing the structural strength of the vehicle. Precautions when applying car trim strips: Before application, place the trim strip in the intended installation position and adjust it accordingly; peel off the protective film with adhesive for application, avoiding finger contact with the adhesive surface during the process; when applying the decorative trim strip, press firmly for 5 to 10 minutes without releasing pressure, as this could affect the bonding effect.
107
Share

How many liters of engine oil should be added to a Mercedes-Benz E300 2.0T?

Mercedes-Benz E300 2.0T requires approximately 8 liters of engine oil for an oil change. Below are the specific details about engine oil: 1. Mineral Engine Oil: Derived from crude oil, mineral engine oil is generally very low-cost. However, since the mineral oil base is prone to oxidation, various imported additives are added. Its service life is about six months. 2. Semi-Synthetic Engine Oil: Although more expensive to refine, semi-synthetic oil has excellent oxidation resistance, making it a high-quality long-lasting oil with a service life of about twelve months. Considering the balance between price and quality, semi-synthetic oil is the most widely applicable. 3. Fully Synthetic Engine Oil: This is chemically synthesized engine oil, which can maintain its lubricating properties even when the base oil deteriorates.
102
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.