···
Log in / Register

Can I Take the Subject 4 Exam on Statutory Holidays?

6Answers
HadleyDella
08/29/2025, 11:10:03 PM

No, but you can make an appointment. Related information: Appointment method: You can make an appointment through the 12123 platform. You can log in to 12123 10 days in advance to check if there are exams on weekends and make an appointment. Additional information: A driver's license is a document that motor vehicle drivers are required to obtain in accordance with the law. The minimum age to obtain a driver's license is 18 years old. After obtaining a motor vehicle driver's license, the validity period of the license is divided into three types: 6 years, 10 years, and long-term. Drivers must hold the corresponding driver's license to drive on the road, otherwise they may face criminal liability.

Was this review help?
115
Share
VonJaxson
09/11/2025, 03:16:28 AM

Many young learners nowadays prefer to take driving tests during holidays, but the arrangement for the subject four test on statutory holidays depends on the local vehicle management office. Last month, I accompanied a friend to handle this matter and specifically checked the system of Traffic Management 12123—vehicle management offices are generally closed on national statutory holidays, while there might be extra sessions on weekends. However, some cities are piloting holiday test services. For example, Shenzhen opened self-service test centers during the National Day holiday last year. The most reliable method is to check for available test slots on the Traffic Management 12123 APP seven days in advance or directly call the local driving test center to inquire, as the schedules vary significantly between cities. Before taking the subject four test, it's advisable to practice more with the question bank and review the wrong answers several times for better preparation.

Was this review help?
10
Share
Expand All
Holden
10/25/2025, 04:06:05 AM

Actually, the scheduling of the Subject 4 driving test is tied to the working hours of the vehicle management office. On national statutory holidays such as New Year's Day and Spring Festival, invigilators and system maintenance personnel take time off, and test centers are generally closed. However, some cities may reschedule tests around the holidays. For example, last year during the Dragon Boat Festival, our local center arranged three consecutive days of additional test sessions. It's advisable to check the test reservation page on the Traffic Management 12123 app ten days in advance, as available slots are updated in real time. If you're in a hurry to get your license, you might also consider test centers in neighboring cities or counties, as they sometimes offer special holiday sessions. Remember to bring your ID card and student file, and avoid staying up late before the test to ensure clear judgment.

Was this review help?
6
Share
Expand All
Mackenzie
12/08/2025, 03:29:58 AM

For the subject four exam, you need to check the specific schedule of the local vehicle management office. Most test centers are closed during statutory holidays, but some cities are piloting convenient services, such as Beijing and Shanghai, which keep self-service test centers open during short holidays. Last month, when I helped my cousin make an appointment, I noticed that the weekend slots on the Traffic Management 12123 APP were more abundant than those on weekdays. If your appointment happens to coincide with holidays like Qingming Festival or Dragon Boat Festival, it's advisable to call the driving test center three days in advance to confirm. Actually, taking the exam a few days later might not be a bad thing; reviewing the question bank a few more times can help you better memorize those confusing traffic marking questions.

Was this review help?
3
Share
Expand All
SimonRose
01/28/2026, 09:49:08 PM

Whether you can take the Subject 4 exam during holidays really varies by location. For example, Hangzhou opened five test sites during last year's National Day holiday, but some third or fourth-tier cities might completely close theirs. The key is to check the notice board at your local vehicle management office—some test centers recently posted their schedules at the entrance. I recommend checking the official 12123 booking system for the most accurate information, where red dates indicate exam suspension and gray dates mean no booking slots are open. If you're in a hurry to get your license, avoiding long holidays like Spring Festival is more reliable. Nowadays, many test centers offer evening exams, which tend to be less crowded after work hours. Practicing with mock tests on apps like Drive Test Master five or more times before the exam significantly improves your passing rate.

Was this review help?
12
Share
Expand All
ColinMarie
04/24/2026, 02:25:02 AM

The scheduling of Subject 4 exams on statutory holidays depends on the situation. During national unified holidays, the DMV will definitely be closed, but local adjusted working days may still hold exams. Last Labor Day, I encountered a student who made a wasted trip because the local holiday arrangement resulted in the test center being closed for five consecutive days. The most hassle-free method is to download the Traffic Management 12123 app, where you can select 'Exam Date' during the reservation process to see all available time slots. If the app shows no exam slots available on holidays, immediately contact your driving school instructor to check the internal schedule. As a reminder, on the exam day, remember to wear a light-colored top, as the on-site photo background is dark blue and may cause issues.

Was this review help?
20
Share
Expand All
More Q&A

What are the functions of the buttons next to the Civic's gear shift?

Introduction to the buttons next to the Civic's gear shift: 1. The top left button is for Auto Hold, which refers to an automatic braking function; 2. The bottom left button is for the Electronic Parking Brake (EPB), a technology that achieves parking braking through electronic control; 3. The top right button is for the Engine Start-Stop system, which temporarily stops the engine when the vehicle comes to a halt (e.g., at a traffic light); 4. The bottom right button is for Eco Mode, which, when activated, enhances fuel efficiency for more economical driving. Here are some related details: 1. Auto Hold is an automatic braking function. Once activated, for instance when stopping at a traffic light, it eliminates the need to manually engage the handbrake or electronic parking brake, simplifying the operation. 2. The Electronic Parking Brake works on the same principle as the mechanical handbrake, both achieving parking braking through the friction between the brake disc and brake pads. The only difference is that the control method has evolved from a mechanical handbrake lever to an electronic button. 3. The Engine Start-Stop system automatically shuts off the engine when the vehicle comes to a temporary stop (e.g., at a traffic light) during driving. When it's time to move forward again, the system automatically restarts the engine.
114
Share

Should the GSX250 use 92 or 95 octane fuel?

According to the official vehicle manual recommendation, the GSX250 should use 92 octane gasoline. In addition to checking the appropriate fuel grade in the vehicle manual, you can also find it on the fuel tank cap, which will also be indicated. Generally, the fuel grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. However, with the application of some new technologies, the fuel grade cannot be solely determined by the compression ratio. A high compression ratio can also be tuned to use lower octane fuel. This is because, besides the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the fuel grade, the higher the octane number and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the GSX250 occasionally uses the wrong fuel grade, simply switch back to the correct grade after consumption. However, long-term use of the wrong fuel grade can have the following effects: For vehicles recommended to use lower octane fuel, using higher octane fuel will not cause damage, but the increase in octane number will alter the fuel's ignition point, leading to delayed combustion in the engine. This means both the engine's power output and thermal efficiency will decrease, resulting in poorer performance in practice. For vehicles recommended to use higher octane fuel, using lower octane fuel can cause engine knocking. Because the octane number is too low, the fuel's ignition point decreases, causing premature ignition during the compression stroke. If the fuel ignites before the spark plug fires during the compression stroke, resistance will occur during the upward stroke. This resistance makes the engine run very unstably. If the knocking is imperceptible, it only increases noise without significant damage to the engine. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring.
120
Share

Can Water Enter the Engine Through the Spark Plug?

Under normal rainy conditions, water will not enter the spark plug of a car unless the rainfall is extremely heavy, reaching the level of the car's hood. In such cases, water can seep into the spark plug from under the hood. Spark plugs are installed on the side or top of the engine. In earlier models, spark plugs were connected to the distributor via ignition cables. However, over the past decade, most car engines have switched to direct connections between the ignition coil and the spark plug. Under high voltage, the air between the center electrode and the side electrode of the spark plug rapidly ionizes, forming positively charged ions and negatively charged free electrons. When the voltage between the electrodes reaches a certain level, the number of ions and electrons in the gas increases like an avalanche, causing the air to lose its insulating properties. A discharge channel forms in the gap, leading to a "breakdown" phenomenon. At this point, the gas becomes a luminous body, creating a "spark." Along with the heat expansion, a "crackling" sound is also produced. The temperature of this electrical spark can reach 2000–3000°C, which is sufficient to ignite the air-fuel mixture in the engine's combustion chamber.
102
Share

Parallel Parking: Watch for the Curb Corner Disappearing or the Door Handle?

Parallel parking involves watching for the curb corner to disappear, then reversing a bit further and turning the steering wheel fully to the right. Here is more information about parallel parking: The rules of parallel parking require the driver to correctly operate the vehicle and accurately park it into the designated parallel parking space. The operational rules state that the wheels must not cross the boundary lines when entering the parking space, and the vehicle body must not exceed the parking space limits when stationary. Parallel parking is widely used in real-life situations, especially in residential areas where it is frequently encountered, making it a highly practical assessment item. Parallel parking technique: After starting from the initial position, turn your head to look through the small window of the right rear door until you see pole No. 1, then turn the steering wheel fully to the right. After turning the wheel fully, check the left rearview mirror until the vehicle body aligns with pole No. 4, then turn the steering wheel back to the center. Continue reversing while watching the left rearview mirror until the left rear wheel is centered over the line, then turn the steering wheel fully to the left. Straighten the vehicle to complete the parking.
118
Share

Can traffic violations before the score reset be handled after the reset?

Traffic violation points incurred before the driver's license score reset can be handled after the reset date. If a motor vehicle driver's accumulated points within a scoring cycle do not reach 12 points, and all fines have been paid, the points will be cleared. If the accumulated points do not reach 12 points but there are unpaid fines, the points will carry over to the next scoring cycle. If a motor vehicle driver's accumulated points reach 12 points or more twice within a scoring cycle, in addition to having their driver's license confiscated, attending training, and taking exams as stipulated in Article 23, they must also undergo a driving skills test. Driver's license point deductions are penalties for traffic violations. Depending on the severity of the violation, points can range from a minimum of 1 to a maximum of 12 per offense. The scoring cycle corresponds to one inspection period. If a driver accumulates 12 points in one cycle, they lose their driving privileges and must typically undergo no less than 7 days of traffic safety education. Only after passing the exam can their driving privileges be restored.
101
Share

What is the difference between positive and negative profile shift in automotive gears?

Automotive gears can have either positive or negative profile shifts. While the tooth height remains the same, the tooth thickness differs. Gears with increased tooth thickness have positive profile shifts, while those with reduced tooth thickness have negative profile shifts. When the center distance between two gears cannot be changed, a positive profile shift is applied to the pinion (to avoid undercutting) and a negative profile shift to the larger gear, maintaining the same center distance. In this case, the absolute values of the profile shifts are equal. Standard gears mesh with their pitch circles tangent to each other. Gears with profile shifts mesh on the operating pitch circles, where they are tangent. The pressure angle on the operating pitch circle is called the working pressure angle, which differs from the pressure angle on the standard pitch circle (standard pressure angle). The working pressure angle is an important factor in designing gears with profile shifts. Profile shifting can prevent undercutting during manufacturing when the number of teeth is small. It allows achieving the desired center distance and, in cases with a large gear ratio, applying a positive profile shift to the pinion (which is more prone to wear) to increase its tooth thickness. Conversely, a negative profile shift is applied to the larger gear to reduce its tooth thickness, balancing the service life of both gears.
105
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.