···
Log in / Register

Can I schedule the exam if the required hours for Subject 2 are not completed?

6Answers
LaElias
07/29/2025, 08:59:13 AM

You can schedule the exam even if the required hours for Subject 2 are not completed. If you have already made an appointment, you can contact your instructor for further guidance. Here is some additional information: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment. It refers to the field driving skills test. For small vehicles (C1/C2), the test items include five mandatory components: reverse parking, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving (commonly known as S-curves). Some regions may include a sixth item: high-speed toll card collection. For large vehicles (A1/A2/A3/B1/B2), the test items include: stake test, stopping and starting on a slope, parallel parking, crossing a single-plank bridge, curve driving, right-angle turns, passing through a limited-width gate, navigating continuous obstacles, driving on undulating roads, narrow road U-turns, simulated highway driving, continuous sharp turns on mountainous roads, tunnels, rain (fog) conditions, slippery roads, and emergency handling.

Was this review help?
120
Share
AlexanderAnn
08/13/2025, 10:06:18 PM

I just got my driver's license not long ago. I remember the requirements for the subject two training hours were very strict - if you didn't complete enough hours, you simply couldn't book the exam. The driving school system would automatically lock you out. If your training hours weren't sufficient, the system would block your exam registration. I think this is quite reasonable, as the required hours ensure that beginners get enough practice with skills like reverse parking and parallel parking. I've seen people who tried to take shortcuts by not completing their hours - they failed the test and nearly caused accidents. The training hours actually help you accumulate experience and hone your skills, so you won't panic during the exam. I suggest everyone follow the proper procedures - don't rush it. It's much safer to take the test only after completing all required hours, otherwise you'll just waste money and time. Driving schools usually have apps to check your training progress, so practice more in advance to avoid last-minute stress. There's no need to hurry when learning to drive - safety always comes first.

Was this review help?
1
Share
Expand All
SanEmilio
10/09/2025, 03:05:49 AM

I've been driving for almost ten years now. Looking back on my driving school days, it's true that you can't take the test if you haven't completed enough hours for Subject 2. The required hours are a mandatory threshold—you must complete the specified number of hours before the exam system allows you to schedule a test. This rule is in place to ensure everyone masters the basic skills and prevents new drivers from causing accidents on the road. If your hours are insufficient, the booking button will appear grayed out and unclickable. My personal advice is to plan your driving practice time in advance and avoid cramming at the last minute. Completing the required hours will boost your confidence and help you pass the test more easily. In fact, those hours are part of the learning process—practicing parking and reversing a few more times will make you more skilled. Your driving instructor will remind you of your progress, so don’t think about taking shortcuts. Getting a driver’s license isn’t the end goal—safe driving is what truly matters.

Was this review help?
7
Share
Expand All
SanJake
11/22/2025, 03:21:24 AM

I have been training students for many years, and the required hours for Subject 2 must be fully completed before booking the exam. The rules are clear: the system monitors the training hours, and insufficient hours will block the exam booking. These hours help reinforce essential skills like clutch control and steering. Don’t slack off—practice diligently to ensure a smooth exam experience. I’ve noticed that students who complete the required hours have higher first-time pass rates and fewer accidents. Regularly check your progress to avoid last-minute surprises. Driving schools usually have supervision mechanisms, and falsifying hours can lead to exam bans. In short, the required hours are there to protect everyone, so take them seriously.

Was this review help?
20
Share
Expand All
SanCollin
01/12/2026, 10:09:08 PM

As a safety-conscious driver, I firmly believe that scheduling the exam without completing the required hours for Subject 2 is absolutely unacceptable. The training hours are mandated by regulations, and insufficient hours will result in the system rejecting your exam appointment. This measure prevents inexperienced drivers with inadequate skills from causing accidents. Based on my research, students who complete the full training hours have a significantly lower accident rate. The training focuses heavily on steering and brake control, which are crucial for the road test. I recommend planning ahead to avoid a last-minute shortage of training hours. Driving schools can help you check your records and arrange additional practice sessions in advance. Falling short on training hours not only wastes time but may also lead to fines—steadily building your skills is the better approach. Safety is no trivial matter; only take the exam after completing the required hours to ensure your confidence and security.

Was this review help?
15
Share
Expand All
Morgan
04/09/2026, 01:44:25 AM

From a policy perspective, it's simply not feasible to book the driving test without completing the required hours for Subject Two. The exam system is designed with a mandatory training hour threshold to ensure every learner receives adequate practice. These hours cover both practical and theoretical lessons – if incomplete, the booking button remains disabled. This safety regulation aims to minimize risks posed by unprepared drivers. I recommend using your driving school app or online platform to track progress and make up any shortfall early. Taking the test only after fulfilling all hours is more efficient – it boosts pass rates and saves money in the long run. Don't cut corners; these hours tangibly improve skills that benefit real-world driving. Rules exist for good reason – following them is the smartest approach.

Was this review help?
12
Share
Expand All
More Q&A

Which gear should a motorcycle be in when waiting at a red light?

Motorcycles should be in neutral gear when waiting at a red light. Here is a detailed introduction about it: Motorcycle: A two-wheeled or three-wheeled vehicle driven by a gasoline engine, steered by handlebars to control the front wheel. It is lightweight, flexible, and fast, widely used for patrol, passenger and cargo transportation, and also serves as sports equipment. An internal combustion engine vehicle with two or three wheels arranged in a row, equipped with one or two saddle-shaped seats for passengers. Classification: Broadly speaking, motorcycles are divided into street bikes, road racing motorcycles, off-road motorcycles, cruisers, touring bikes, etc. Development history: Since 1885 when German Daimler invented and manufactured the world's first motorcycle powered by a gasoline engine, the development of motorcycles has undergone over 100 years of tremendous changes.
104
Share

What Causes the Failure of the Driver's Side Window to Roll Up and Down?

Here are the reasons for the failure of the driver's side window to roll up and down: Aging, excessive dirt, or deformation of the window seal: This creates resistance to the window's upward or downward movement. Dirty window lift tracks: This is also a lubrication issue. Cleaning the window lift tracks and applying grease can resolve the problem. Battery issue: Low battery power may also cause difficulty or failure in window operation. If there is sufficient power and no resistance, but the window still struggles to move, it is likely a motor failure. Window regulator failure: This includes issues with the window lift tracks, cables, sliders, etc., and the only solution is to replace the window regulator.
106
Share

What is the speed for manual transmission?

2nd gear corresponds to a speed of 5-20km/h, 3rd gear corresponds to 20-40km/h, 4th gear corresponds to 40-60km/h, and 5th gear corresponds to 60-100km/h, or the maximum speed. Below are detailed explanations about it: Introduction 1: The minimum speed for each gear is the speed when the vehicle is idling in that gear. The power output from the fuel engine is transmitted through the drivetrain to the drive wheels. Introduction 2: If the engine speed is higher, the vehicle speed will naturally be faster; if the engine speed is lower, the vehicle speed will naturally be slower.
102
Share

What is the normal clearance for a VVT pulley?

VVT pulley rotation with clearance is normal. The VVT pulley is part of the engine's variable valve timing technology. Its principle is to adjust the intake (exhaust) volume, as well as the valve opening and closing time and angle, based on the engine's operating conditions. This ensures the optimal amount of air intake and improves combustion efficiency. Below is a detailed introduction about it: Introduction 1: If the VVT timing pulley has issues, it can cause timing misalignment, leading to symptoms such as unstable idle and poor acceleration. In severe cases, it can affect the engine's normal operation and cause damage. Introduction 2: VVT, or variable valve timing, is a technology used in piston engines. Currently, many manufacturers produce engines equipped with VVT technology, which is quite common.
108
Share

Can I Pass the Annual Inspection Without Changing the Wheel Hub Size?

Vehicle wheel hubs can be modified, but there are requirements and restrictions. Modifications to wheel hubs of the same size only require registration changes at the vehicle management office to pass the annual inspection. However, modifications to wheel hubs of different sizes are not approved and cannot be filed even after modification, thus failing the annual inspection. Only by reverting the wheel hubs before the inspection can the vehicle pass. Below is a detailed introduction about it: Car wheel hub modification: This is a high-risk modification. If done improperly, it can lead to serious consequences, which is not worth the loss. Wheel hub replacement: After replacing the wheel hubs, it is best to replace the tires to match them and adjust the vehicle's computer data to ensure driving safety.
105
Share

How Long Does It Take for the Adhesive to Dry After Replacing the Windshield?

The adhesive used when replacing a windshield typically takes 3 to 5 days to fully dry. After windshield replacement, avoid washing the car for three days, and remove the positioning tape securing the windshield after this period. Additionally, regular maintenance of the windshield is essential. Precautions After Windshield Replacement: Avoid washing the car for three days post-replacement, and remove the positioning tape only after this period. Try to avoid driving on excessively bumpy roads, and refrain from sudden braking or rapid acceleration to prevent windshield displacement. Do not insert parking permits or other cards into the gap between the windshield and the dashboard. Windshield Maintenance Methods: Glass cleaner can be used for windshield maintenance. Currently, there are three main types of glass cleaners on the market: summer glass cleaner, winter antifreeze glass cleaner, and special antifreeze glass cleaner. Summer glass cleaner is primarily used to remove insect residues from the glass surface. During regular glass maintenance, choose the appropriate glass cleaner based on the season and weather conditions. When the windshield surface appears blurry, cleaning with the right glass cleaner can significantly improve clarity. If you notice issues with random reflections on the glass at night, wiping it with glass cleaner can also help.
109
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.