Can I renew my B2 driver's license in a different location?

1 Answers
DeColeman
07/29/25 11:56pm
You can renew your B2 driver's license in a different location. Renewing an expired driver's license in a different location: For renewing a driver's license in a different location, you can generally renew it at the issuing authority or the local vehicle management office within three months before the license expires. However, if the license has already expired, it can only be renewed at the issuing authority. When renewing, since the current driver's license management system is fully connected to the internet, the vehicle owner can bring their ID card, driver's license, and health certificate directly to the local vehicle management office to complete the renewal. Failure to renew on time: According to the "Regulations on the Application and Use of Driver's Licenses," motor vehicle drivers should apply for renewal at the vehicle management office of the issuing authority within 90 days before the expiration of their driver's license. If the driver's license is not renewed within one year after expiration, it will be revoked. If the license is revoked but not more than two years, the driver can restore normal use of their license by passing the subject one exam. If the revocation exceeds two years, the driver will need to reapply for a new license.
Was this review help?
17
0
Share
More Forum Discussions

Why is it okay to drive at 100 when the speed limit is 80?

The reasons for not being penalized when driving at 100 in an 80 speed limit zone are as follows: No nearby cameras during speeding: Nowadays, highways are equipped with hidden cameras or interval speed monitoring, making it difficult to speed arbitrarily. This situation often occurs on some national roads lacking cameras. Generally, on various roads, only speeding exceeding 10% will result in substantial penalties. If the speeding does not reach 10%, only a warning will be issued. The Measures for the Implementation of the Road Traffic Safety Law of the People's Republic of China stipulate in Article 86 that motor vehicles driving on roads in violation of speed limits shall be penalized as follows: If the speed exceeds the limit by less than 10%, a warning shall be issued; On roads with a speed limit below 50 km/h, if the speed exceeds the limit by 10% or more but less than 20%, a fine of 50 yuan shall be imposed; if it exceeds the limit by 20% or more but less than 50%, a fine of 100 yuan shall be imposed; if it exceeds the limit by 50% or more but less than 70%, a fine of 300 yuan shall be imposed; if it exceeds the limit by 70% or more, a fine of 500 yuan shall be imposed; On roads with a speed limit between 50 km/h and 80 km/h, if the speed exceeds the limit by 10% or more but less than 20%, a fine of 100 yuan shall be imposed; if it exceeds the limit by 20% or more but less than 50%, a fine of 150 yuan shall be imposed; if it exceeds the limit by 50% or more but less than 70%, a fine of 500 yuan shall be imposed; if it exceeds the limit by 70% or more, a fine of 1000 yuan shall be imposed; On roads with a speed limit between 80 km/h and 100 km/h, if the speed exceeds the limit by 10% or more but less than 20%, a fine of 150 yuan shall be imposed; if it exceeds the limit by 20% or more but less than 50%, a fine of 200 yuan shall be imposed; if it exceeds the limit by 50% or more but less than 70%, a fine of 1000 yuan shall be imposed; if it exceeds the limit by 70% or more, a fine of 1500 yuan shall be imposed; On roads with a speed limit above 100 km/h, if the speed exceeds the limit by 10% or more but less than 50%, a fine of 200 yuan shall be imposed; if it exceeds the limit by 50% or more but less than 70%, a fine of 1500 yuan shall be imposed; if it exceeds the limit by 70% or more, a fine of 2000 yuan shall be imposed. Article 87 states that for tourist buses, highway passenger transport vehicles, hazardous chemical transport vehicles, and civil explosive transport vehicles, if the speed exceeds the limit by less than 50%, a fine of 200 yuan shall be imposed; if it exceeds the limit by 50% or more, a fine of 500 yuan shall be imposed, with an additional 200 yuan for every 5 km/h over the limit, but the total fine shall not exceed 2000 yuan.
17
2
Share

How to use the dash cam in Emgrand GS?

The dash cam page can be seen by swiping right on the main interface. The original car usually comes with an 8GB card, which can record about an hour of video. If you frequently drive medium to long distances, it is recommended to replace it with a 64GB card. The usage method of the dash cam: The dash cam is installed on vehicles (such as cars, motorcycles) to record driving and driving status information, as well as complete video and audio recordings during the journey, providing evidence in case of traffic accidents or disputes. In the past, dash cams were only used as evidence for traffic accidents. In foreign countries, they are mandatory installations; otherwise, the vehicle is not allowed on the road. In China, this concept is not as strong, and it was only in recent years that the widespread use of dash cams was noticed. However, a significant portion of car owners still don’t even know what a dash cam is used for. So, let’s understand how to use a dash cam properly. First, turning on and off: 1) Press the power button to turn on or off. 2) When connected to a charger, the DVR turns on automatically. When disconnected, it delays for 5 seconds before automatically turning off. Second, photo mode: After turning on, press the mode key to select photo mode, then press the OK key to take a photo. Third, video mode: After turning on, the DVR automatically enters video mode, with the recording indicator flashing. During recording, press the OK key to stop. Note: Please insert an SD card before use. Fourth, preview mode: After turning on, press the mode key to select preview mode, then use the up/down keys to choose a video file. Press the OK key to play or pause, and press the mode key to exit. Fifth, AV OUT function: Use an AV cable to connect the DVR to an HD TV or other output terminal, allowing you to view and play video files on the TV. Sixth, screen display switch: After turning on the DVR, press the switch key to toggle between front camera display, rear camera display, and dual-camera simultaneous display. Seventh, screen saver function: During standby or recording, long-press the power button to turn the screen saver on or off. Eighth, motion detection function: Set the option in the system menu to to activate motion detection. When an object moves in front of the DVR, it will automatically start recording. When the object stops moving, it will automatically stop recording and enter standby mode. Exiting motion detection will automatically turn off the function. Ninth, date and time settings: After turning on, press the menu key to enter the settings menu, use the down key to select the "date setting" option, and press the OK key to enter the sub-menu. Use the mode key/switch key/up key/down key to adjust the year, month, day, and time. After setting, press the OK key to confirm and exit the sub-menu. Tenth, infrared night vision function: While the device is on, press the up key to turn the rear camera infrared light on or off. Eleventh, charging: The DVR can be charged using a DC 5V charger, USB 5V charger, or computer USB port. The red indicator light turns on during charging and turns off when fully charged. Twelfth, connecting to a computer: 1. USB drive function: Connect the DVR to the computer using a USB cable. On the DVR screen interface, select the USB-Disk option and press the OK key to enter USB drive mode.
4
3
Share

How to resolve the tire pressure system malfunction in Audi Q3?

Press the reset button on the dashboard, select the tire pressure option, and click confirm to deactivate the tire pressure warning. The system provides timely alerts for high pressure, low pressure, and high temperature in tires to prevent traffic accidents caused by tire malfunctions, ensuring driving safety.
11
4
Share

How to Start a Cadillac Car?

Press the one-touch start button to cycle through three modes: Accessory, Ignition/Run/Start, and Off/Lock/Close. The remote key must be inside the vehicle to operate. If the electronic start does not work, the vehicle may be in an area with strong signal interference, which affects the electronic start system.
4
0
Share

How to Replace the Rear Wiper on a Ford Kuga?

First, replace the co-pilot wiper. Lift the wiper arm to engage its self-locking mechanism. Use your right hand to pinch the two dovetail clips. Rotate the wiper blade at a certain angle and pull it upward to remove. Install the new wiper blade by rotating it clockwise at a certain angle until it clicks into place.
14
4
Share

Where is the keyhole for Cadillac's one-button start?

This slot is hidden in a certain part of the car's interior. Some models may have it designed under the mat of the cup holder, and the exact location depends on the specific model. For some one-button start models, the hidden mechanical keyhole is located behind the one-button start button. You need to pry out the plastic one-button start button to see it.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.