···
Log in / Register

What are the fault issues with the Qin Plus DMI?

6Answers
CooperMarie
07/29/2025, 04:23:56 PM

The fault issue with the Qin Plus DMI is oil burning. Below is an introduction to the BYD S6: Introduction: The BYD S6 is BYD's first SUV, positioned as a mid-to-high-end domestic SUV, which was launched in September 2010. Its dimensions are 4810/1855/1680mm in length/width/height, with a wheelbase of 2720mm, ranking among the top in its class. A minimum ground clearance of 190mm ensures excellent off-road capability. Powertrain: The S6 offers three engine options: 1.5T, 2.0L, and 2.4L, available in four variants: Manual Luxury, Manual Premium, Automatic Premium, and Automatic Ultimate. It is equipped with either the BYD483QB engine or the Mitsubishi 4G69 engine. The BYD483QB is an engine independently developed by BYD, featuring Bosch's fuel injection management system and BIVT variable intake system. The BYD S6 boasts a stylish and dynamic exterior design with sharp lines, fully embodying the bold character of an urban SUV.

Was this review help?
102
Share
OOlive
08/14/2025, 01:04:21 PM

I've been driving the Qin PLUS DM-i for over a year, and I feel its common faults mainly focus on the hybrid system and battery. There's sudden shaking or delay during power switching, especially when shifting from electric to fuel mode—the car vibrates like it's hiccuping; battery degradation is also quite annoying, with the range directly halving when using AC in summer, and charging is painfully slow. Additionally, that large infotainment screen occasionally freezes, leaving the navigation stuck in place, requiring a restart to fix. Minor issues like weak AC cooling make long drives uncomfortably hot. I later realized that regular battery health checks are crucial—it's best to get a comprehensive inspection at the 4S store every six months, since safety comes first.

Was this review help?
19
Share
Expand All
LeCora
10/16/2025, 12:09:25 AM

As a young car enthusiast who often tinkers with vehicles, I find the electronic systems in my BYD Qin PLUS DM-i to be quite problematic. The onboard software frequently has bugs—for instance, after an OTA update, the reversing camera lags or fails, requiring a manual factory reset. The touchscreen is sluggish, making it difficult to even operate the air conditioning. These bugs leave me scrambling, especially on the highway. That said, the hybrid mode runs stably, though the battery occasionally drains quickly, possibly due to aging wiring. I recommend paying attention to software update notifications and manually checking connection ports to avoid short circuits. Safety-wise, these minor glitches don’t usually affect driving, but it’s best to keep an emergency manual handy.

Was this review help?
16
Share
Expand All
DeJesse
11/28/2025, 11:57:00 PM

From a daily usage perspective, the powertrain of the Qin PLUS DM-i can sometimes be temperamental. The hybrid module malfunctions, causing the engine to start unexpectedly with really loud noise. The battery charging efficiency is also low, taking an hour longer to fully charge than the claimed time. Additionally, the brake alarm frequently triggers false warnings, which is quite startling. Fortunately, the car's reliability is decent, and most issues can be resolved through software updates at the 4S store. I recommend regular battery maintenance and checking the wiring connections.

Was this review help?
14
Share
Expand All
Andrew
01/19/2026, 01:20:59 AM

I'm concerned about the safety implications of BYD Qin PLUS DM-i malfunctions, such as sudden power interruptions during traffic jams which can be terrifying; or the air conditioning failing to cool in summer, causing headaches during prolonged drives. Most of these minor issues stem from battery thermal management or circuit aging, especially given the complexity of hybrid systems which are prone to glitches. My advice is to perform monthly self-checks on vehicle condition, replace filters and clean dust to prevent major repairs through early intervention. Road safety is no trivial matter - pull over immediately if any issue arises.

Was this review help?
14
Share
Expand All
OLeilani
04/15/2026, 02:29:47 AM

After long-term use of the Qin PLUS DM-i, I found that battery degradation is a persistent issue, with a noticeable drop in range after three years; the poor hybrid switching leads to a surge in fuel consumption, costing extra on gas each month. Software glitches like erratic navigation are also annoying, though they don't affect driving. Proper maintenance can prevent many problems—I insist on quarterly checks of electronic modules and the cooling system to ensure stable operation. Choosing this car was still a wise decision, but regular upkeep is essential.

Was this review help?
6
Share
Expand All
More Q&A

Does the MG Dual-Clutch Transmission Fluid Need to Be Replaced?

MG dual-clutch transmission fluid does need to be replaced. The hazards of not replacing transmission fluid for a long time include: 1. Damage to the transmission's shift control mechanism; 2. Abnormal wear of gears and clutch plates inside the transmission; 3. Affecting the normal operation of the transmission, leading to damage to the transmission valve body. Different vehicle models have different replacement cycles. Below are the replacement cycles for transmission fluid: Manual Transmission: Manual transmission fluid is generally recommended to be replaced every three years or approximately 100,000 kilometers. Automatic Transmission: Automatic transmission fluid is generally recommended to be replaced every two years or approximately 40,000 kilometers. Continuously Variable Transmission (CVT): CVT fluid is generally recommended to be replaced every two years or approximately 60,000 kilometers. The signs that indicate the need for transmission fluid replacement are: vehicle shaking, jerky gear shifts; the dashboard showing a transmission overheating warning; the car stalling; unusual noises. The methods for replacing MG dual-clutch transmission fluid are as follows: Unscrew the drain plug at the bottom of the transmission to drain the old fluid before refilling. Remove the transmission oil pan directly to drain and refill the fluid: This method is more thorough than the previous one, as it removes impurities from the bottom of the oil pan. Use a circulating machine to replace automatic transmission fluid: Using an intelligent circulating machine for dynamic fluid replacement can filter and clean out sludge and impurities inside the automatic transmission.
103
Share

What to Do If Someone Else Uses Your ETC?

When someone else uses your ETC, the first step is to contact the staff immediately. Below is some relevant information about ETC: 1. Introduction: ETC (Electronic Toll Collection), also known as an automatic road toll system or non-stop electronic toll collection system. 2. Purpose: It is a road toll method specifically designed for toll roads, commonly used on highways, toll bridges or tunnels, and certain sections of urban roads to alleviate traffic congestion. 3. Function: The fully automatic electronic toll collection system (ETC, Electronic Toll Collection) is one of the service functions of the intelligent transportation system, particularly suitable for use on highways or busy bridge and tunnel environments. There are dedicated ETC toll lanes at highway toll stations.
111
Share

How often should a family sedan undergo annual inspection?

Family sedans require inspection every 6 years. Vehicles older than 6 years need annual inspection, while those exceeding 15 years must undergo inspection twice a year. Below are relevant details: 1. Annual Inspection: This refers to the annual or biennial safety examination of vehicles, including comprehensive checks on horn, brakes, axle weight, chassis, ignition system, lighting system, exhaust system, license plate installation, etc. 2. Precautions for Vehicle Inspection: Check for any traffic violation records and handle them promptly; Avoid rainy or snowy weather as it may affect accurate brake force testing; Bring all required documents; Verify the presence of safety equipment in the trunk such as fire extinguishers, warning triangles, and reflective vests; Check for any unauthorized modifications.
117
Share

Can You Make a U-turn at Grid Lines?

Grid lines are areas where U-turns are permitted. These grid lines strictly prohibit all vehicles from parking, whether temporarily or for extended periods, to prevent traffic congestion. When there is a stationary vehicle ahead of a yellow grid line, the following vehicle must wait outside the yellow grid line until it is confirmed that there is sufficient space ahead to proceed safely. Other situations where U-turns are allowed include: Presence of U-turn signals or signs: At intersections with U-turn signals, a U-turn can be made when the U-turn signal is green. If there are U-turn signs or lane markings permitting U-turns, drivers may proceed with a U-turn while ensuring their own and others' safety. No U-turn signs but left turns are permitted (no prohibition of U-turns): At intersections where left turns are allowed and there are no signs or markings prohibiting U-turns, drivers can make a U-turn. It's important to note that the maneuver should not interfere with other vehicles and must comply with the left-turn signal. If there is a left-turn waiting area at the intersection, drivers can enter it when the straight-ahead signal is green and wait for the left-turn signal to turn green before making the U-turn. U-turns at dashed lines: U-turns are allowed at both white and yellow dashed lines. For double yellow lines where one side is dashed and the other is solid, U-turns are permitted on the dashed side if it is safe to do so. If the line on your side is solid, U-turns are not allowed. At intersections with such double lines, U-turns can be made on the dashed side, but drivers must not cross the stop line ahead.
114
Share

Should I get a B1 or B2 license first for large vehicles?

For the first time, you can apply for a B2 driver's license, while the B1 vehicle type requires an additional application. The specific details are as follows: 1. Apply for an A2 vehicle type at least three years after obtaining the B2 vehicle type: You must have held a license for medium-sized buses or large trucks for at least three years, or held a license for large buses for at least one year, and have no record of accumulating 12 penalty points in the last three consecutive scoring cycles before applying. 2. Apply for an A1 vehicle type at least five years after obtaining the B2 vehicle type: You must have held a license for city buses, medium-sized buses, or large trucks for at least five years, or held a license for tractor-trailers for at least two years, and have no record of accumulating 12 penalty points in the last five consecutive scoring cycles before applying.
108
Share

Do new cars still need to display the annual inspection sticker?

New cars do not need to display the annual inspection sticker. Vehicle owners can apply for, check, and use the electronic version of the vehicle inspection certificate through the Internet Traffic Safety Comprehensive Service Platform or the "Traffic Management 12123" mobile app. Vehicles that have already obtained the electronic inspection certificate do not need to display the paper version. Traffic police will verify the vehicle's inspection status through law enforcement terminals during traffic management. Additional information: Introduction to vehicle annual inspection: Vehicle annual inspection refers to a mandatory test for all vehicles that have obtained official license plates and registration certificates. It is equivalent to an annual physical examination for vehicles conducted in accordance with the "Technical Conditions for Motor Vehicle Operation Safety." Vehicle annual inspections help promptly eliminate potential safety hazards, encourage better vehicle maintenance, and reduce the occurrence of traffic accidents.
109
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.