···
Log in / Register

Can I change the unflattering photo on my driver's license?

6Answers
StBethany
07/29/2025, 03:26:14 PM

You can replace the unflattering photo on your driver's license by applying for a replacement at the vehicle management office. A fee is required for the replacement, and you can apply even if your license isn't lost. When applying, submit a carefully selected, good-looking one-inch photo with a white background. Notes on driver's license replacement: After the replacement application is successful, you cannot drive with the original license while waiting for the new one. If the replacement process is initiated but the new license isn't issued on the same day, driving during this interim period is prohibited and will be considered as driving without a license. Once a new license is issued, the original driver's license becomes invalid. If your license was lost and you've obtained a replacement, even if you later find the original, it will be deemed invalid, and the new license will be the valid one. For a lost or damaged license replacement, a medical certificate is not required; only a loss statement is needed. However, for license renewal upon expiration, both the original and a copy of the medical certificate must be provided.

Was this review help?
106
Share
OEleanor
08/14/2025, 10:13:30 AM

It's quite common for driver's license photos to turn out unflattering. Last time I went to the DMV to get mine replaced because mine looked like I was half-asleep. Actually, it's very easy to change – just apply for a reissue at your local vehicle administration office. Bring a few new standard ID photos, making sure the size matches official requirements, like a 2-inch blue or white background photo. You'll also need to bring your ID card and old driver's license, fill out a simple form, and pay a small fee (usually a few dozen yuan). Normally, you'll get the new license in a few days. My advice is to take the photo in good lighting to avoid regrets later. After changing to a better photo, I felt much better driving, without worrying about awkward moments during traffic stops. Don’t change it too frequently – at most once a year – to avoid raising identity concerns. For safety, it's best to handle such details properly.

Was this review help?
4
Share
Expand All
MacAdrian
10/15/2025, 01:13:05 AM

I've encountered a similar issue before when my driver's license photo was too blurry, which was really annoying. The good news is that the photo can be replaced by reapplying at the vehicle management office. You'll need to prepare recent ID photos, your original ID card, and pay a small fee, usually under 50 yuan. The process is straightforward: fill out an application form, submit the required materials, and wait for notification to collect your new license. I recommend going early during office hours to avoid queues. After changing the photo, recognition becomes clearer, and it reduces daily hassles. Don't forget to check local specific requirements, as regulations may vary between cities—some might require appointments via an app. Having a decent-looking photo on your driving documents boosts confidence and gives peace of mind while driving.

Was this review help?
10
Share
Expand All
JoelFitz
11/28/2025, 01:04:45 AM

Thinking back to my old driver's license photo, the one taken when I was younger really didn't look good. Of course, you can change it. Just go to the DMV to reapply. Bring a few new photos and your ID card, pay a small fee, and it's done. I've changed mine once before—the process was quick and easy. With a clearer photo, it's much more pleasant to use. Just take care of it simply, so it doesn't interfere with the joy of driving.

Was this review help?
4
Share
Expand All
SanJameson
01/18/2026, 02:28:32 AM

As a road trip enthusiast, I often pay attention to the aesthetics of my driver's license. Ugly photo? You can totally replace it! Just apply for a new license at the DMV. I replaced mine last time: prepare a new ID photo, ID card, old driver's license, fill out the form and pay the fee, which costs about 40 yuan. Got the new license in a week, super convenient. The new photo must be standard size with a light-colored background, avoid fancy filters. After changing it, long-distance driving feels more comfortable, and there are no obstacles during inspections. It's recommended to update it every two years, especially when there are significant facial changes, to maintain a professional image.

Was this review help?
16
Share
Expand All
LeCamille
04/14/2026, 03:57:58 AM

I'm a detail-oriented person, and a bad driver's license photo can ruin the overall impression. It can be changed, and the method is quite simple: just go to the DMV to submit an application for a reissued license. Bring standard ID photos, identification documents, and possibly copies and a small fee. I've done it once, and the process was smooth: fill out the form, get it reviewed, and wait a few days to receive the new license. The new photo should be clear and professional, avoiding glare or blurriness to ensure it can be properly recognized. Pay attention to protecting the photo in daily use to avoid damage that could affect its appearance. Handling this small matter well can enhance your daily driving experience.

Was this review help?
16
Share
Expand All
More Q&A

What is the cause of the P2A00 fault code in the Infiniti G37s?

P2A00 fault code, applicable to all car manufacturers, means oxygen sensor circuit range/performance. The function of the oxygen sensor is to measure the oxygen content in the engine exhaust to correct the fuel injection amount, so that the engine can obtain the optimal air-fuel ratio. Extension: In OBD fault codes, you will often see references to which row and which oxygen sensor. Row 1 refers to the row where cylinder 1 is located, and the remaining row is Row 2. Regardless of the row, the first sensor always refers to the upstream oxygen sensor (before the catalytic converter), and the second sensor always refers to the downstream oxygen sensor (after the catalytic converter).
120
Share

Does the vehicle width include the rearview mirrors?

Vehicle width does not include the rearview mirrors. According to regulations: The total width of a vehicle (excluding rearview mirrors) must not exceed 2.5 meters, and this measurement does not include the rearview mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. The height restriction ensures adequate vertical clearance under bridges and overhead utilities like cables, as well as maintaining the vehicle's rollover stability. Additional information: 1. Information one: The limitation on total vehicle length affects the time required for overtaking or when a vehicle crosses another road or railway line. Internal vehicle dimensions such as front overhang, rear overhang, wheelbase, and minimum turning radius influence the required width on curves and the vehicle's load capacity. 2. Information two: Vehicle width is the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the fixed protruding parts on both sides of the vehicle, i.e., the distance between the two extreme points in the width direction of the vehicle. The mentioned "fixed protruding parts on both sides" do not include rearview mirrors, side marker lights, position lamps, turn signal indicators, fenders, or the deformation of the tire-ground contact area.
103
Share

What Does the Triangle Exclamation Mark Mean?

If a triangle exclamation mark appears, it indicates a potential issue with the vehicle. For safety reasons, it is recommended to have it inspected and repaired. Below are the details: 1. Symbol: A triangle with an exclamation mark in the middle is a general fault indicator. Vehicle fault indicators are categorized into warning lights and reminder lights. 1. Possible reasons for the light to illuminate include: Overheating of the dry dual-clutch transmission clutch; Fuel cut-off system intervention or malfunction; Parking sensor failure; External light malfunction; Engine oil pressure sensor failure; Traction control system warning or malfunction.
111
Share

Where is the fuse box of the Buick Verano located?

The fuse box of the Buick Verano is located below the original air conditioning control panel. You need to remove the gear shift lever side panels, then unscrew the 4 screws behind them. After removing the panels, take out the cigarette lighter and remove the cover plate to access the fuse box. Below is an introduction to the Buick Verano: The Buick Verano is built based on Buick's latest family design language, featuring a winged chrome grille, LED automatic sensing headlights, LED taillights, 17-inch ten-spoke dual-tone aluminum alloy sport wheels, and a fastback roof. The interior of the Buick Verano follows the 360-degree wraparound design concept, with dynamic lines and a new cool black color scheme, creating a youthful and sporty atmosphere. It is equipped with a two-piece oversized panoramic sunroof, front multifunctional seats, a three-spoke sport multifunction steering wheel, dual barrel-style gauges with a 4.2-inch high-definition trip computer, and dual-zone independent automatic air conditioning.
119
Share

What is the height of a sedan?

The height of a sedan generally ranges between 1400mm and 1600mm, with lengths typically between 3800mm and 4300mm, and widths between 1600mm and 1800mm. Different models of sedans may vary in size. Length: Micro cars range from 3 to 4 meters, compact cars around 4 meters, midsize cars around 5 meters, and luxury cars over 5 meters. Width generally falls between 1.4 and 1.8 meters. Width primarily affects seating space and flexibility. For passenger cars, if three seats are to be arranged side by side with sufficient width, the car width usually needs to reach 1.8m. The length, width, and height of a car refer to the outermost dimensions of the vehicle. The front and rear length includes the bumper, the width does not include the side mirrors (when the manufacturer provides multiple width measurements, the one excluding the mirrors is added; if only one measurement is given, that is used), and the height includes the roof rack but not the antenna. Specifically: Car length is the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetrical plane, touching the most protruding parts at the front and rear. Car width is the distance between two planes parallel to the vehicle's longitudinal symmetrical plane, touching the fixed protruding parts on both sides (excluding rearview mirrors, marker lights, position lights, turn signals, flexible mudguards, folding steps, anti-skid chains, and the part of the tire in contact with the ground). Car height is the distance between the vehicle's support plane and the horizontal plane touching the highest protruding part of the vehicle.
106
Share

What are the differences between the three driving modes of the BMW 220i Convertible?

The BMW 220i Convertible offers three driving modes: ECO mode, SPORT mode, and standard mode. The main differences are that ECO mode has softer suspension, SPORT mode has stiffer suspension, and standard mode is a balanced compromise. ECO Mode: In ECO mode, the BMW's throttle response is more delayed, the transmission shifts up quickly, and the suspension becomes softer. SPORT Mode: SPORT mode makes the throttle more responsive, the transmission shifts up at higher RPMs, and the suspension becomes stiffer. Standard Mode: Standard mode is a compromise between these two modes. Typically, ECO mode is suitable for urban areas with light traffic and frequent stops; SPORT mode is ideal for high-speed driving on highways; and standard mode is recommended for congested traffic conditions.
120
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.