Are pickup trucks exempt from highway tolls during National Day?

1 Answers
VanMaddox
07/29/25 11:05am
Pickup trucks are not exempt from highway tolls during National Day. As pickup trucks are classified as light-duty ordinary trucks, all trucks are required to pay tolls during the National Day holiday. During the four statutory holidays—Spring Festival, Qingming Festival, Labor Day, and National Day—only passenger vehicles with seven seats or fewer (including seven seats) are exempt from highway tolls. All trucks and passenger vehicles with eight seats or more (including eight seats) are still subject to tolls. Highways, abbreviated as expressways, are roads specifically designed for high-speed automobile travel. The definition of highways varies across different countries, regions, eras, and academic fields. According to China's highway engineering technical standards, highways are multi-lane roads exclusively for automobiles, featuring directional separation, lane separation, and full access control.
Was this review help?
16
4
Share
More Forum Discussions

How to Solve the Illuminated Engine Warning Light in the Tiguan?

If the engine warning light in your Tiguan is illuminated, you can follow these steps to address the issue: First, check whether the engine is running normally and if there are any issues such as shaking or black smoke. If these symptoms are present, avoid restarting the engine. Note: If the light is red, do not restart the engine under any circumstances. If the engine can start, turn it off and wait for 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the 'ON' position without engaging the clutch. The vehicle will perform a self-diagnostic check upon powering up. Wait for 5-10 seconds and observe whether the warning light on the dashboard turns off. If the warning light remains illuminated, visit a service center as soon as possible to diagnose the issue. The service center can use a portable diagnostic tool to read the trouble codes, identify the problem, and perform targeted repairs. The engine warning light resembles a water tap icon and comes in two colors: yellow and red. A yellow light indicates a warning, while a red light signifies a prohibition. When the yellow light is on, it means certain vehicle system parameters may be outside the set range, and the car can still be driven, albeit with some functions restricted. If the red light is illuminated, the vehicle must be stopped immediately, the engine turned off, and further driving prohibited until the issue is inspected. Common causes of an illuminated engine warning light include: sensor failure, fuel quality issues, poor combustion of the air-fuel mixture, turbocharger problems, intake or exhaust issues, and anti-theft system malfunctions.
19
0
Share

What brand is the transmission of the Volvo S90?

The transmission of the Volvo S90 is from Aisin, a world-renowned professional developer and manufacturer of automotive automatic transmissions established in 1969. In the field of automotive automatic transmissions, Aisin's products hold the highest market share globally. The Volvo S90 comes standard with an 8-speed automatic transmission, which can quickly respond to changes in engine speed, ensuring smooth gear shifts. The multiple switchable gear ratios mean the engine's torque and power range can be effectively utilized. Two of these gears are overdrive gears, which can save fuel when driving at a constant engine speed. Manual gear selection is also available, and the current gear can be displayed on the screen in front of the driver. When using the transmission of the Volvo S90 in daily driving, the following points should be noted: Do not delay changing the transmission oil for too long. Although many models now come with maintenance-free transmission oil, maintenance-free does not mean it never needs to be changed. Prolonged failure to change the transmission oil can lead to damage to internal components such as bearings and the housing. Avoid coasting in neutral for extended periods. While driving manual transmission vehicles, many experienced drivers may coast in neutral, but for automatic transmission vehicles, this can cause the transmission to overheat and may result in a jolt when shifting back into Drive (D) mode. Never shift into Drive (D) or Reverse (R) before the vehicle has come to a complete stop. Many drivers, aiming to demonstrate smooth operation, shift directly into reverse while the vehicle is still moving, which can significantly damage the transmission gears and, over time, lead to issues like gear grinding. Do not frequently climb steep slopes in Drive (D) mode. When facing steep inclines, automatic transmission vehicles can overheat due to high load or may shift up too early, resulting in insufficient climbing power. In such cases, using manual mode to limit the gear to a lower speed or switching to sport mode can help protect the transmission. Avoid long-distance towing. If an automatic transmission vehicle breaks down, it should be transported using a flatbed tow truck with the vehicle in Neutral (N) mode, rather than being towed directly with a tow rope or similar methods.
13
1
Share

What does EPC mean on a car dashboard?

The EPC indicator light can illuminate in two states: during power-on self-test and under other circumstances. The power-on self-test is an indication that the vehicle is monitoring the status of all sensors before driving. Generally, if the engine is not started after power-on, the light will turn off by itself after about 3 seconds. If the EPC indicator light remains on under other circumstances or does not turn off for a long time after the vehicle is started, the main causes may include faults in the engine intake system, throttle valve, fuel system, engine, ECU control unit, or brake lights. Below is a detailed explanation of the reasons for the EPC light illuminating under other circumstances: Engine intake system fault: The EPC light will illuminate if the engine intake is obstructed or insufficient. Throttle valve fault: Carbon buildup is a common issue with the throttle valve. Additionally, dirt on the valve body can affect intake, causing the indicator light to illuminate. Fuel system fault: Issues such as substandard fuel, deteriorated fuel, or poor fuel atomization can trigger the light. Engine fault: Insufficient engine pressure or problems with the intake valve or other power system components can also cause the EPC light to illuminate. ECU control unit fault: For example, interference with the vehicle computer signals or false alarms from the vehicle computer. Brake light fault: Situations like brake lights not working, brake switch failure, or brake circuit issues can trigger the EPC light. Solutions for when the EPC indicator light illuminates: Troubleshoot intake system issues, use fuel with the appropriate octane rating, clean the throttle valve, etc. Remove carbon deposits from relevant components. Re-flash ECU-related data. If the EPC indicator light illuminates, the owner can first try turning off the engine and restarting it to see if the EPC light remains on. If it does not illuminate again, there may be no issue, possibly due to temporary interference affecting the EPC indicator. If the EPC light remains on or frequently illuminates, the vehicle should be taken to the nearest repair facility for professional diagnosis and troubleshooting to eliminate potential safety hazards. The full English name of EPC is Electronic-Power-Control, which translates to electronic power control. Most people refer to it as the engine electronic stability system. The EPC system primarily includes controllers and sensors related to the powertrain. When sensor data in the system is abnormal, the EPC system will take predefined measures for the powertrain. Common EPC indicator lights typically display two colors: yellow and red. If the EPC fault light is yellow and the vehicle can still operate normally, drive cautiously to a repair facility for inspection. If the EPC fault light is red, the situation is more severe, and the driver should pull over immediately and contact a repair technician. Continuing to drive could directly affect the vehicle's core components or driving safety.
17
2
Share

What is the 12123 license plate selection process?

Enter your username and password to log in to the Traffic Management 12123 platform, then navigate to the Traffic Management 12123 interface and select the motor vehicle services. Choose the type of license plate selection you wish to proceed with, such as used vehicle transfer registration, then select the corresponding province and city. Be aware of the processing time and ensure you complete the selection within the stipulated period. Select the appropriate vehicle management office for processing, noting that only small cars are supported for license plate selection. Accurately enter the transfer registration information. Begin the license plate selection process. After completing the mobile operations, proceed to the service hall for the entire process: acceptance, scanning the QR code, payment and certificate issuance, and finally receiving the license plate order.
1
4
Share

How to Use Driving License Points for Deduction?

In this step, users need to carefully read the content, including: the matters requiring attention and relevant responsibilities when handling fine payments. In this step, users need to carefully confirm the violation records requiring payment. After selecting the violation records that need to be paid, click the "Confirm Payment" button.
12
4
Share

How to Open the Door and Get in a Tesla?

Tesla's different models have slightly different ways to open the doors. For the Tesla Model-S, when you approach the car with the key fob, the door handles will automatically pop out, and you can then manually pull the door open. For the Tesla Model-X, when you approach the car with the key fob, the doors will automatically open. As you move toward the rear of the door, it will open wider. For the Tesla Model-Y, you need to place the key near the B-pillar to unlock it. Press one side of the door handle with your thumb and pull the other side to open the door. You need to press the door handle until one end lifts up, then pull to open the door.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.