···
Log in / Register

What to Do If the Driver's License Renewal is Overdue?

1Answers
Elise
07/28/2025, 11:07:36 PM

You can go to the traffic management department to renew your "Motor Vehicle Driver's License". If you fail to participate in the review and still drive a motor vehicle, the traffic management department will impose a fine. If the license has been expired for more than one year but less than three years without renewal, the driver needs to take a regulations test at the vehicle management office before renewing the license. A regulations test is required for renewal. If the license has been expired for more than three years without renewal, the "Motor Vehicle Driver's License" will be revoked, and the driver will need to retake the "Motor Vehicle Driver's License" exam.

Was this review help?
111
Share
More Q&A

Has the BYD F3 been discontinued?

BYD F3 has been discontinued. Here is detailed information about the BYD F3: 1. Overview: The BYD F3 is an A+ class passenger car launched by BYD Auto, officially released on April 16, 2005. The design concept of the F3 draws on the successful experience and models of Japanese and Korean car development. The "MM" design concept (which means maximizing the space that people can enjoy inside the car while minimizing the space occupied by necessary machinery) runs through the entire F3 design. 2. Others: The wheelbase is 2600mm. The vehicle dimensions are 4.533 meters, 1.705 meters, and 1.490 meters. The trunk volume is 480 liters. The fuel consumption is 5.9L/100km. The fuel tank capacity is 50 liters. The engine type is BYD473QE, a VVL variable valve lift engine. The top speed is 170km/h. The acceleration time is 11.3 seconds. The drive type is front-wheel drive.
105
Share

Why does the engine stall?

Reasons for engine stalling are as follows: 1. Misoperation. Wrong gear engaged, braking too abruptly, improper clutch-throttle coordination, accidentally touching the car key causing stall - simply restart the engine. 2. Dirty throttle body/idle control valve. Mostly occurs during idling, often accompanied by engine shaking. When restarting, gently press the accelerator to provide some fuel for successful ignition. Timely throttle body cleaning is recommended. 3. Fuel system malfunction. Possible causes include poor fuel quality, fuel depletion, fuel pump burnout, clogged fuel lines, damaged fuel pump fuse, or faulty fuel pressure sensor - inspect related components. 4. Ignition system failure. Includes spark plug issues, faulty ignition coil/module, or aging cylinder wires - examine relevant parts. 5. Throttle body or idle control valve failure. Stalling caused by damaged throttle assembly or idle control valve. 6. Power supply system faults (generator or battery). Dead battery prevents starting, generator failure stops electricity generation - check battery power status and generator condition.
114
Share

How long can demerit points be left unprocessed?

Normally, traffic violations can be left unprocessed within one scoring cycle. If a violation remains unprocessed beyond one scoring cycle, the violation record will be carried over to the next scoring cycle, affecting its usage. Below are specific details about traffic violations: 1. Revocation: If a violation exceeds 12 points and remains unprocessed for three years, the driver's license will be revoked. According to relevant regulations, after accumulating 12 points, the driver must attend a full-score education program at the traffic police department within 15 days. Failure to participate in the study or examination will result in the traffic police department announcing the suspension of the driver's license. 2. Late fees: Therefore, it is essential to promptly address any traffic violations. For on-the-spot fines issued by traffic police, they must be processed within 15 days; otherwise, late fees will be incurred.
114
Share

What are the reasons for the BYD F3 display screen not lighting up?

The reasons for the BYD F3 display screen not lighting up may include car host power supply failure or abnormal accessory quality. Below is detailed information about the BYD F3: 1. Overview: The BYD F3 is an A+ class passenger car produced by BYD Auto, officially launched on April 16, 2005. The design concept of the F3 draws on the successful experiences and models of Japanese and Korean car development. The "mm" design concept (which means maximizing the space for people to enjoy inside the car while minimizing the space occupied by necessary machinery) runs through the entire design of the F3. 2. Others: The wheelbase is 2600mm. The vehicle dimensions are 4.533 meters, 1.705 meters, and 1.490 meters. The trunk volume is 480 liters. The fuel consumption is 5.9L/100km. The fuel tank capacity is 50 liters. The engine type is BYD473QE, a VVL variable valve lift engine. The top speed is 170km/h. The acceleration time is 11.3 seconds. The drive method is front-wheel drive.
103
Share

Where is the Wuling Rongguang motor located?

Under the front passenger seat. Maintenance precautions for the car motor are as follows: 1. Good starting habits: Generally, do not start for more than 5 seconds. Wait at least 15 seconds before restarting if the first attempt fails. If the car still doesn't start after the third attempt, wait for one minute before trying again. Avoid prolonged continuous starting to prevent burning out the starter motor. 2. Regular battery inspection: Ensure the battery has normal capacity and sufficient power to start the engine. Car starting batteries are maintenance-free with a lifespan of about one and a half to two years, depending on the frequency of vehicle use. Have it checked at a professional repair shop when necessary. 3. Regular engine compartment cleaning: Prevent dust and oil from corroding and aging the engine wiring harness, which may cause poor contact or rust at the starter interface leading to conductivity issues. If you notice grinding noises or weak starting, take the car to a repair shop for maintenance.
107
Share

Does the Wuling Hongguang S have a three-way catalytic converter?

Wuling Hongguang S is equipped with a three-way catalytic converter. Symptoms of a clogged "three-way catalytic converter": 1. The first stage is the mild clogging phase: At this stage, chemical complexes are adsorbed on the surface of the catalyst. The only manifestation is a reduced exhaust purification function, resulting in excessive exhaust emissions. 2. The second stage is the moderate clogging phase: Chemical complexes have accumulated to a certain extent on the catalyst surface. At this stage, exhaust back pressure increases, fuel consumption rises, and power decreases. 3. The third stage is the severe clogging phase: Due to severe clogging, the operating temperature of the "three-way catalytic converter" rises. High-temperature sintering blockages form at the front end of the three-way catalytic converter. 4. High-temperature sintering blockages: One type is metal sintering blockage, and the other is carbon deposit sintering and coking blockage. This is determined by whether the fuel contains lead or manganese anti-knock agents. At this stage, the vehicle experiences a severe drop in power, frequent stalling, and in severe cases, the exhaust pipe may turn red, potentially leading to vehicle self-ignition.
114
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.