Wiring Help How do I correctly wire the Signature Hardware 442426 Windsor Gate Vanity Light during installation?

[BennettMarie]

To properly wire your Signature Hardware 442426 Windsor Gate Vanity Light, follow these steps from the instruction manual: First, thread the mounting screws (A) into the corresponding holes on the circular strap (B). Next, secure the circular strap (B) to your outlet box using the outlet box screws (C). Now, connect the white wire from your fixture to the white wire from your outlet box, and connect the black wire from your fixture to the black wire from your outlet box. Use the provided wire connectors to cover these two wire connections, and for added security, wrap them with electrical tape. After that, connect the copper ground wires from the fixture and the outlet box to the ground on the circular strap, securing the connection with electrical tape. By carefully following these steps, you should be able to safely and correctly wire your Signature Hardware vanity light. If you feel unsure at any point, consulting a qualified electrician is always recommended.