Installing Jensen Triaxial Series car audio speakers enhances your in-vehicle sound. Follow these steps for a successful installation: First, carefully review the Jensen Triaxial Series speaker's instructions. Safety first disconnect the negative terminal of your car battery. Next, consider these pre-installation guidelines: Check the mounting depth and ensure the speaker fits without obstructions. Avoid cutting or drilling into critical components like fuel lines. Run speaker wires inside the car for protection, using rubber grommets where wires pass through metal. Keep speaker wires away from high-current sources. Make sure you connect the wires with the correct polarity (+ and -). Now for the installation steps: Remove your car's existing speakers. Position the new Jensen Triaxial Series speakers and align them with the mounting holes. Connect the positive (+) and negative (-) speaker terminals, ensuring correct polarity. Connect the speaker outputs from your head unit to the speakers. Use factory wiring harness adapters if available. If needed, run new speaker wire carefully, using quality connectors or solder connections securely. Avoid wiring speakers out-of-phase. For mounting, determine the ideal speaker locations, ensuring sufficient space. Refer to the specifications chart for the appropriate hole size. Use the grille as a template to mark mounting locations. Drill the holes with a 3/32" bit. Finally, mount the speakers using the provided screws or grilles. For any specific questions, consult the Jensen product manual or contact Jensen's customer support.
