···
Log in / Register

who is on the front of a nickel

1Answers
DelAlex
12/01/2025, 04:37:22 AM

While the provided context includes links to relevant sources, the text itself consists of website navigation and security information and does not contain the answer to the question.

Based on general knowledge, the person featured on the front, or obverse, of the United States nickel is Thomas Jefferson. As the third President of the United States and a principal author of the Declaration of Independence, his portrait has graced the five-cent piece since 1938.

The current design, which has been in circulation since 2006, depicts a forward-facing portrait of Jefferson. This image replaced the long-standing profile view of Jefferson that was used for most of the coin's history. The word "Liberty" and the year of minting are also included on the front of the coin.

Was this review help?
106
Share
More Q&A

How do I connect the X-NUCLEO-OUT12A1 expansion board to my STM32 Nucleo board?

Connecting the X-NUCLEO-OUT12A1 expansion board to your STM32 Nucleo development board is straightforward. Follow these steps for a successful setup: First, physically connect the X-NUCLEO-OUT12A1 to the STM32 Nucleo board by aligning and plugging it onto the Arduino® UNO R3 connector pins on the Nucleo board. Next, power the STM32 Nucleo board by connecting a mini-USB or micro-USB cable from your computer, depending on your specific Nucleo board model (e.g., NUCLEO-F401RE or NUCLEO-G431RB). Then, upload the appropriate firmware (.bin file) to the STM32 Nucleo microcontroller using software tools like the STM32 ST-LINK utility, STM32CubeProgrammer, or an Integrated Development Environment (IDE) such as IAR, Keil, or STM32CubeIDE, as detailed in the user manual. After the firmware is loaded, connect the ISO808A device supply voltage via CN1 on the X-NUCLEO-OUT12A1. Also, provide the digital supply voltage according to the Digital section of the X-NUCLEO-OUT12A1 user manual. To connect your load, use the output connector on the X-NUCLEO-OUT12A1 expansion board. To initiate or reset the example sequence, press the black button on the STM32 Nucleo board. Finally, to select among the example applications available in the default firmware package, use the blue button on the STM32 Nucleo board. By following these steps, you will be able to properly set up the X-NUCLEO-OUT12A1 expansion board with your STM32 Nucleo development board.
111
Share

How do I safely and effectively charge my Soundcore HPS01 Wireless Charging Bluetooth Speaker

To ensure your Soundcore HPS01 Wireless Charging Bluetooth Speaker charges correctly and safely, follow these essential steps: First, always use the original charging cable included with your speaker, or a cable that is certified for use with your device. This helps to prevent charging issues. Avoid wearing or using the speaker while it is charging. Before plugging in, make sure the charging port is completely dry, free of any liquid, sweat, or moisture to prevent damage. When charging, keep the speaker away from extreme temperatures; the ideal storage temperature ranges from -20 to 45 degrees Celsius (-4 to 113 degrees Fahrenheit). Also, avoid direct sunlight while charging. Finally, if your speaker has a waterproof rating, consult the user manual for specific guidance on handling water exposure. Adhering to these guidelines will help to extend the life and performance of your Soundcore HPS01 speaker.
110
Share

How do I set the time on my Abovsare WC7500 Digital Wall Clock?

Setting the time on your Abovsare WC7500 Digital Wall Clock is straightforward. Follow these steps: Plug in your clock: Make sure the clock is plugged into a working power outlet using the included power cord. Access the Menu: Grab the remote control that came with your clock. Press the "Menu" button to open the clock's settings menu. Navigate to Time Settings: Use the arrow buttons on the remote control (usually up, down, left, and right) to scroll through the menu options until you find "Time". Enter Time Setting Mode: Once "Time" is highlighted, press the "OK" button (or the button that serves a similar function; it might be labeled "Enter" or have a checkmark icon). Adjust the Hours and Minutes: Now you can adjust the time! Use the arrow buttons again. Usually, the left and right arrows will adjust the hours, and the up and down arrows will adjust the minutes. Some models might use different arrow combinations; refer to your clock's manual if needed. Confirm and Save: When the time is correct, press the "OK" button (or the button used to enter settings) to save the changes. Exit the Menu: Press the "Menu" button again to exit the settings menu and return to the main clock display. For more detailed visuals and troubleshooting tips, please consult the official Abovsare WC7500 Digital Wall Clock user manual.
117
Share

How can I adjust the cord length on my HAILEY HOME PD1656 Jordyn Matte Black Dome Pendant Light?

Adjusting the cord length of your HAILEY HOME PD1656 Jordyn Matte Black Dome Pendant Light allows you to customize its hanging height to perfectly suit your space. Here's how: First, decide on the ideal hanging height by measuring from your ceiling to where you want the pendant to sit. Next, carefully feed the extra cord length through the small cord grip, typically indicated as part (C). Use the tightening tool, often part (D), to secure the cord grip against the cord, ensuring it holds the desired length. Make sure the cord is firmly secured to prevent any slipping or safety hazards. Following these steps, you can easily adapt the HAILEY HOME pendant light to fit your room's style and functionality.
102
Share

How do I accurately use the GERCHWAY 200PSI 360° Tire Pressure Gauge?

Using your GERCHWAY 200PSI 360° Tire Pressure Gauge is a breeze. Here's a simple guide to get you started: First, unscrew and remove the valve stem cap from your tire. Next, firmly attach the gauge's swivel chuck to the valve stem, ensuring a tight seal for an accurate reading. Hold the gauge steady until the pressure reading on the dial stops changing. Take note of the pressure displayed on the gauge. Compare this reading with the recommended tire pressure for your vehicle; this information is usually located on a sticker inside your driver's side door or in your owner's manual. If the pressure is below the recommended level, inflate the tire using an air compressor until it reaches the correct PSI. After inflating, recheck the pressure using the gauge and repeat the inflation process if needed. Finally, carefully detach the gauge from the valve stem and securely replace the valve stem cap. For further details and specific instructions, always consult the user manual that came with your GERCHWAY 200PSI 360° Tire Pressure Gauge.
117
Share

How do I switch modes on my WEofferwhatYOUwant GR-B6ZM-3ZKS Portable First Harp?

Changing modes on your WEofferwhatYOUwant GR-B6ZM-3ZKS Portable First Harp is easy. Here's how: Power On: Locate the power switch and turn your harp on. Find the Mode Button: Identify the control buttons; one of these is the mode selection button. It may be labeled "Mode" or have an icon representing different settings. Cycle Through Modes: Press the mode button repeatedly. Each press will cycle through the available options, such as lullaby or other musical selections. Listen to the harp as you cycle to identify each mode. Select Your Mode: Continue pressing the mode button until you find the desired mode. The harp will begin playing the associated melodies or sounds. Start Playing: Once you have selected your preferred mode, you can play the harp by strumming the strings or using the keys. If you're still experiencing issues, consult the user manual for more detailed instructions or contact WEofferwhatYOUwant customer support for assistance.
103
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.