
To ensure your LPX-751 Intelligent Laser Smoke Sensor functions optimally, cleaning is recommended at least annually. Here's a step-by-step cleaning procedure based on the manufacturer's instructions: First, remove the sensor from its system. Then, use a small standard screwdriver to release the four cover removal tabs and detach the cover. Carefully vacuum the outside of the screen without removing it. Next, pull the screen assembly away from the sensing chamber base; replacement screens are available if necessary. Use a vacuum or clean compressed air to remove any dust or debris from the sensing chamber. Reinstall or replace the screen assembly, aligning the arrow on the screen assembly with the arrow on the sensor, and pushing it down until it snaps into place. Finally, realign the cover with the sensor using the LEDs, carefully snapping it back into place, and restore system operation. Remember to test the sensors after cleaning, as detailed in the testing section of the manual. Regular using these guidelines will help maintain your LPX-751's performance.


