···
Log in / Register

what's a 1941 d nickel worth

1Answers
DiAlexander
12/01/2025, 05:00:31 AM

Hello there! That's a great question. The value of a 1941-D Jefferson nickel really comes down to its condition, as it's a very common coin from a year with high production numbers.

In heavily worn, circulated condition, the kind you might find in old pocket change, a 1941-D nickel is typically worth a little over its face value, perhaps 15 to 50 cents. These nickels are made of a copper and nickel alloy and do not contain any silver, unlike the "war nickels" that were produced starting in mid-1942.

The value starts to climb significantly for coins that are in uncirculated, or mint, condition. A basic uncirculated 1941-D nickel might fetch a few dollars. If the coin is in a pristine, "gem" uncirculated state with great luster and very few marks, its value can increase to between $15 and $30.

For serious collectors, a key detail is the "Full Steps" on Monticello on the reverse of the coin. If all five or six steps are sharp and complete, it indicates a strong strike and makes the coin much rarer and more desirable. A 1941-D nickel with Full Steps in a high uncirculated grade can be worth hundreds of dollars. For an accurate assessment, it's always best to have the coin examined by a professional coin dealer.

The provided search results were not relevant to your question, so this information is based on general numismatic knowledge.

Was this review help?
114
Share
More Q&A

How to align the door panel on my COSTWAY JVI0716 Side Cabinet

To adjust the door panel on your COSTWAY JVI0716 Side Cabinet, consult the product's instruction manual for detailed guidance. The process typically involves these steps: First, loosen the adjustment screw or mechanism (specific details are in the manual). Then, gently move the door panel forward or backward to achieve the desired alignment. Once the door panel is correctly positioned, tighten the adjustment screw or mechanism to secure it. Always refer to the COSTWAY JVI0716 Side Cabinet instruction manual for precise instructions and diagrams to ensure proper adjustment and avoid any potential issues.
101
Share

What's the process for installing the landing gear on my Hangar 9 Pawnee Brave 20cc ARF?

Installing the landing gear on your Hangar 9 Pawnee Brave 20cc ARF model is crucial for successful flights. Here's a step-by-step guide: Axle Attachment : Use two 1/2-inch wrenches to securely fasten the axle to the landing gear. Wheel Collar Preparation : Using a 1.5mm hex wrench, loosen the setscrews in the wheel collars. Remove the outer wheel collar. Wheel Collar Placement : Slide the remaining wheel collar firmly against the hex area and tighten the setscrew. Apply a small amount of threadlock to the setscrew before tightening to prevent it from vibrating loose. Lubrication : Apply a single drop of light machine oil to each axle to ensure smooth wheel rotation. Wheel Installation : Mount the wheel onto the axle. Then, install the remaining wheel collar, ensuring the setscrew is tightened onto the flat surface designed on the axle. Again, apply a drop of threadlock to this setscrew. Fuselage Mounting : Attach the landing gear to the fuselage using four M4 x 20 socket head cap screws and four M4 washers. Tighten these screws using a 3mm hex wrench. Apply threadlock to each screw to secure them. Always consult your Hangar 9 Pawnee Brave 20cc ARF manual for specific details or any variations that may apply to your model.
106
Share

How do I connect my Bling LED Wireless Microphone Speaker to my phone using Bluetooth?

Pairing your Bling LED Wireless Microphone Speaker with your mobile device is easy. First, power on the Bling LED Wireless Microphone Speaker. Next, enable Bluetooth on your mobile device, ensuring you're within 32.8 feet of the speaker. Your phone should then search for available Bluetooth devices. Locate and select "BT BUNG Mic" from the list of available devices. You'll know the pairing is successful when you hear a beep sound. If you're having trouble, double-check that the microphone is in pairing mode and that Bluetooth search is enabled on your phone. Also, make sure the devices are close enough for Bluetooth to work properly. For more detailed instructions and troubleshooting tips, consult the Bling LED Wireless Microphone Speaker's instruction manual.
110
Share

How can I connect my SENSSUN iN4901D Smart Nutritional Scale to my device using Bluetooth?

Connecting your SENSSUN iN4901D Smart Nutritional Scale to your smart device via Bluetooth involves a few simple steps. First, enable Bluetooth on your smartphone or tablet. Next, power on your SENSSUN iN4901D scale. Open the accompanying app for the scale and create a new user profile. Make sure the scale is turned on and within range of your device for a stable connection. If you're experiencing connection problems, check the scale's battery life and replace the batteries if needed. Try relaunching the app on your device. If the issue continues, restart your device and attempt to pair the scale again. For optimal performance, ensure only one device is connected to the scale at a time. Also, verify that your device supports Bluetooth 4.0 or a later version for compatibility. If you need more detailed instructions or troubleshooting help, please consult the product manual or contact SENSSUN customer support for further assistance.
102
Share

How do I install an Acuity Brands HNLS11 Night or Step Light?

Installing the Acuity Brands HNLS11 Night or Step Light involves several key steps. First, the HNLS11 is designed to fit a standard switch box that's flush with the wall. Make sure the box is at least 3-1/2 inches deep; the Steel City “CX” series is a good choice. Next, consult the wiring diagrams in the instruction manual to connect the wires correctly. Connect the power supply wires to the driver input wires, following the diagram's instructions. After that, remove and discard the nuts holding the screws on the LED unit and faceplate. Do not separate the LED unit from the faceplate. Apply silicone sealant to the gasket on the back of the faceplate to create a good seal. Place the LED unit into the box, aligning the holes in the faceplate with those in the box. Then, use screws to secure the fixture to the switch box, threading them through both the faceplate and the LED unit. Finally, ensure the holes in the faceplate align with those in the LED unit and secure everything with screws. Always refer to the Acuity Brands HNLS11 manual for detailed instructions, or reach out to Acuity Brands Lighting, Inc. for assistance if needed.
104
Share

How do I install my KOHLER K-25875 Hyten White Elongated Slow Close Toilet Seat?

Installing the KOHLER K-25875 Hyten White Elongated Slow Close Toilet Seat is straightforward. Here's a step-by-step guide to help you: First, make sure your existing toilet bowl is clean and dry. Next, position the new KOHLER toilet seat onto the bowl, carefully aligning the mounting holes on the seat with the corresponding holes on your toilet. The included Grip-Tight installation hardware is designed for easy top-mount installation. Secure the seat by using this hardware to fasten it firmly to the bowl. Once installed, gently test the seat to ensure it's stable and doesn't move. With the KOHLER K-25875 installed, you can enjoy its elongated, closed-front design for comfort, along with the convenient Quiet-Close feature. If you have any issues during installation, consult the manual or contact KOHLER customer support at 1-800-456-4537 for further assistance.
104
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.