Absolutely! Here's how to set up your Bushnell 119904V Cellucore 20 Trail Camera: First, download the free Bushnell Trail Camera app on your smartphone (available on the App Store for iPhones and Google Play for Android devices). Once installed, open the app and either log in or create a new account. Inside the app, tap the Camera icon, usually found at the bottom of the screen, and then tap the "+" symbol to add your camera. Next, you'll need to scan the QR code located on the label inside your Bushnell Cellucore 20, or manually enter the serial number. This connects your camera to your account. Before you begin, remove any protective plastic coverings from the camera lens and the PIR sensor. Now, install 12 AA batteries. We recommend Energizer lithium batteries. Be sure to insert them correctly, paying close attention to the polarity markings. Insert a new SD card (up to 32GB) – a high-speed card (class 6 or higher) is best if you plan on recording video clips. Then, switch the power to "On" at your chosen location. The camera's default settings are designed for general scouting use, but you can customize them through the app or on a computer. Before closing the camera, confirm it has acquired a cellular signal by checking the camera status indicator lights. To mount your Bushnell Cellucore 20, use the included tree strap or the 1/4"-20 mounting socket. Use the leveling arm to get the perfect angle. You're now ready to go! Use the mobile app or the management website to view images, adjust settings, monitor battery life, and more. For more detailed information, be sure to consult the user manual, which provides in-depth instructions on all the settings and features.
