···
Log in / Register

rena sofer is she leaving gh

1Answers
StJuliette
12/01/2025, 07:42:34 AM

Based on the provided information, it appears that Rena Sofer, who plays the character Lois Cerullo on "General Hospital," is indeed departing from the show.

The context indicates that Sofer announced she is moving out of Los Angeles, where the program is filmed, and relocating to New York state after living on the West Coast for nearly 35 years. One source explicitly states that the "General Hospital star Rena Sofer is saying goodbye." Her physical move away from the show's production center, combined with reports of her "saying goodbye," strongly suggests an exit from her role on the ABC soap opera.

Was this review help?
115
Share
More Q&A

How do I charge my SARINA SA-KRK-SLV Karaoke Wireless Mic and Speaker?

Charging your SARINA SA-KRK-SLV Karaoke Wireless Mic + Built-in Speaker is straightforward. Here's how: Locate the micro USB port on the karaoke microphone. Plug the micro USB end of the charging cable into this port. Connect the USB end of the charging cable to a USB port on your computer or a USB wall charger (not included). A red LED indicator on the microphone will light up, signaling that it's charging. Allow approximately 3 hours for a full charge. The LED indicator will turn off once the battery is completely charged. Once charged, disconnect the microphone from the charging cable, and it's ready to go. For optimal performance and to avoid potential damage, use the charging cable that came with your SARINA SA-KRK-SLV Karaoke Wireless Mic + Built-in Speaker. You can also find more detailed information and troubleshooting tips in the user manual that came with your device.
107
Share

How do I mount the Fat Cat 727 electronic dartboard on my wall?

Mounting your Fat Cat 727 electronic dartboard is a straightforward process. Here's how to do it: Choose Your Spot : Select a location with at least 10 feet of clear space in front of the board to allow for comfortable play. Mark the Bullseye : Use a tape measure to mark a point on the wall 68 inches (172.7 cm) from the floor. This mark indicates the center of the dartboard (the bullseye). Find the Studs : Use a stud finder to locate wall studs. Mounting directly to a stud provides the most secure and stable installation. Mounting Without Studs : If a stud isn't available at your desired location, use the included mounting hardware. Mark for Mounting : Measure 7 inches (17.7 cm) directly above the bullseye mark and make another mark. Ensure these two marks are perfectly vertical using a level. Left and Right Marks : From the upper mark, measure 2 3/4 inches (6.9 cm) to the left and right, and mark the wall at these points. Drill Pilot Holes : Using a drill, create pilot holes at the left and right marks. These holes will accommodate the mounting screws. Install Wall Anchors (if needed) : If you're not mounting into studs, insert wall anchors into the pilot holes, following the anchor's specific instructions. Common options include plastic anchors, toggle bolts, or hollow wall anchors. Insert Screws : Insert screws into the anchors, leaving about 1/4 inch (6.5 mm) of space between the screw head and the wall. Hang the Dartboard : Position the dartboard so that the screw heads fit into the lower part of the keyholes on the back. Then, slide the dartboard downward about 1/2 inch to secure it. Tighten Screws : Tighten the screws to firmly secure the dartboard to the wall. For the most accurate and safe installation, always refer to the specific instructions and safety recommendations provided in the Fat Cat 727 Electronic Dartboard's instruction manual.
112
Share

How to connect your Welland Smart Body Fat Scale to the Fitdays App?

Connecting your Welland Smart Body Fat Scale to the Fitdays App is easy. Follow these steps: Prepare the Scale: Insert four AAA batteries into your Welland Smart Body Fat Scale and place it on a hard, flat surface. Enable Bluetooth: Turn on Bluetooth on your smartphone or tablet. Download and Install Fitdays: Download and install the Fitdays App from the Apple Store or Google Play. Alternatively, scan the QR code in the Welland Smart Body Fat Scale manual. Register in Fitdays: Open the Fitdays App and register for a new account using your email address or social media account. Enter Personal Data: Input your personal information, including gender, age, and height, into the app. Accurate data is essential for precise measurements. Pair the Scale: In the Fitdays App, go to "Mine" then "My device" to find the scale named "common." Select it to connect your phone to the scale. Activate the Scale: Tap your foot on the scale to activate the display. Wait until it shows "0.0" (kg/lb/st). Take Your Measurement: Step onto the scale with bare feet, ensuring full contact with the four electrodes on the handlebar and the metal plates on the scale. Remember to use bare feet for complete data; otherwise, only weight and BMI will be displayed. Data Transfer: The display will flash as the scale weighs and analyzes your body composition. Remain on the scale until the display shows "0.0.0," indicating that the data has been transferred to your phone. View Your Results: You can view additional data parameters by clicking on "More Data" in the Fitdays App. The analysis includes body weight, BMI, body fat rate, muscle mass, and bone mass. Manage Users: To switch users or add new user profiles, go to "Me" then "Manage users" in the Fitdays App. The scale can recognize users and prompt the correct profile. Each account supports up to 24 users. Baby Mode: To weigh a baby, select "+" and then "Baby Mode" in the Fitdays App. Weigh yourself first, then hold the baby to get their weight. These instructions are based on the Welland Smart Body Fat Scale Instruction Manual.
113
Share

How to Pair Your Welland Smart Body Fat Scale with the Fitdays App?

Connecting your Welland Smart Body Fat Scale to the Fitdays App is straightforward. First, insert 4 AAA batteries into your scale and place it on a hard, level surface. Next, enable Bluetooth on your smartphone or tablet. Download and install the Fitdays App from the Apple App Store or Google Play Store, or by scanning the QR code in your Welland scale's manual. Open the Fitdays App and create an account using your email or social media login. Input your personal details, including gender, age, and height – accuracy here is key for precise body composition readings. Now, pair the scale with your device. In the Fitdays App, go to "Mine," then "My device," and locate the scale, which is typically labeled "common." Once connected, tap your foot on the scale to activate it, waiting until the display shows "0.0" (kg/lb/st). Step onto the scale with bare feet, ensuring full contact with the four electrodes on the handlebar, and stand on the metal plates with your bare feet as indicated in the manual's photos. Note: Wearing socks or a loose cable connection may limit readings to weight and BMI only. The display will flash as it weighs and analyzes your body composition. Remain still until the display shows "0.0.0," indicating data transfer completion. Access additional data by tapping "More Data" within the Fitdays App. Here, you'll find an analysis of metrics like body weight, BMI, body fat percentage, muscle mass, and bone mass. To switch users or add profiles, go to "Me," then "Manage users" within the app; the scale can identify users and prompt profile selection. Each account supports up to 24 users. For weighing a baby, select "+" then "Baby Mode" in the Fitdays App; weigh yourself first, then weigh yourself holding the baby to calculate the baby's weight. These instructions are based on the Welland Smart Body Fat Scale user guide.
103
Share

How do I set up my AcuRite 00829 weather station?

Setting up your AcuRite 00829 weather station is straightforward. Here's a step-by-step guide: Unpack and Inspect: Begin by unpacking all components: the display unit, outdoor sensor, and the instruction manual. Remove Protective Film: Peel off the protective film from the display unit's LCD screen. Sync Channels (A-B-C Switch): On both the outdoor sensor and the display unit, locate the A-B-C switch. Set both switches to the same letter (A, B, or C). This ensures the units communicate correctly. Install Batteries in Outdoor Sensor: Open the battery compartment of the outdoor sensor and insert 2 AA batteries, ensuring the correct polarity. If you live in a cold climate (below -4ºF / -20ºC), use lithium batteries. Install Batteries in Display Unit: Open the display unit's battery compartment and insert 3 AA alkaline batteries, again paying close attention to polarity. Set Time, Date, and Units: Press the " " button on the display unit to enter SET MODE. Use the " " and " " buttons to adjust the settings. Press the " " button to save and advance to the next setting. The order is: TIME ZONE, DST (Daylight Saving Time), CLOCK HOUR, CLOCK MINUTE, CALENDAR MONTH, CALENDAR DATE, CALENDAR YEAR, TEMPERATURE UNITS, and PRESSURE UNITS. Place Display Unit: Position the display unit in a dry, dust-free location. You can place it on a tabletop using the stand or mount it on a wall. Position Outdoor Sensor: Place the outdoor sensor outside, ideally in a spot protected from direct rain and sunlight. A location 4 to 8 feet above the ground with shade and good airflow is best. You can use the integrated hang holes or a hanger. Ensure Range: Make sure the display unit and outdoor sensor are within 330 ft (100 m) of each other to maintain a good wireless connection. Allow Synchronization: Give the sensor and display unit a few minutes to synchronize. If you experience any issues, consult the troubleshooting section of your AcuRite manual. Once set up, your AcuRite 00829 will provide accurate weather information and forecasts. For further assistance, contact AcuRite customer support at (877) 221-1252 or visit their website at www.AcuRite.com.
115
Share

How can I change the access code on my Schlage BE365 PLY 619 keypad deadbolt?

To modify the access code on your Schlage BE365 PLY 619 Keypad Deadbolt, follow these straightforward steps: Begin by pressing the Schlage button on the keypad. Next, press the number 2 key. You'll then need to wait for the Schlage button to illuminate orange three times, accompanied by three beeps. After this, input your desired new 4-digit code. Finally, wait for the Schlage button to flash orange three times, and listen for three beeps, confirming that your new code has been successfully programmed. For detailed instructions and troubleshooting advice, please consult the official Schlage BE365 PLY 619 user manual, which can be downloaded from the Schlage website or found through a quick online search.
105
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.