Congratulations on your new Concept VR3510! Here's how to get it up and running for a sparkling clean home:
- Initial Setup and Inspection: First, carefully unpack your Concept VR3510. Check for any shipping damage before you begin. Remove all packaging materials and accessories.
- Docking Station Installation: Connect the power cord to the docking station. Place the docking station against a wall, ensuring at least 6 cm of space on the sides and 1.5 meters of open space in front of it. The charging indicator light should illuminate when plugged in and turn off when fully charged. Avoid direct sunlight near the docking station to prevent signal interference.
- Powering On and Charging: Press and hold the power button on the Concept VR3510 to turn it on. If the battery is low, place it on the docking station to charge. The robot needs a battery level of at least 15% to operate.
- Connecting to the Mobile App (Optional): For advanced features, connect your Concept VR3510 to Wi-Fi using the mobile app. Follow the app's instructions to connect.
- Starting the Cleaning Process: Start cleaning by either pressing the button on the robot or using the mobile app.
- Exploring Cleaning Modes: Use the app to select from various cleaning modes, such as complete automatic cleaning, local turbo cleaning, zone cleaning, or room-specific cleaning. Ensure the floor is clear of obstacles.
- Using the Wiping Module (Optional): Attach the wiping cloth and fill the 2-in-1 container with water. Insert the wiping module and begin cleaning. Remember to remove and clean the wiping module after each use.
- Regular Maintenance: Regularly clean the main brush, side brush, dust container, filter grid, and sensors. Consult your manual for detailed maintenance instructions.
- Troubleshooting: If you encounter any issues, refer to the troubleshooting section of your Concept VR3510 manual for solutions to common problems like starting or charging issues.
Enjoy your cleaner home with your Concept VR3510 Robotic Vacuum Cleaner!
