Absolutely! Here's a step-by-step guide to help you connect the wires for your Uolfin A04310 15 Inch 2-Light Matte Gold with Globe Glass Modern-Contemporary Vanity Light. Remember to always turn off the power at the circuit breaker before starting any electrical work.
- Prepare the Mounting Plate: Remove the studs (F) from the back plate (E) and set them aside.
- Mount the Plate: Feed the supply wires from your outlet box through the mounting plate (C). Secure the mounting plate (C) to the outlet box using the mounting screws (A).
- Make the Wire Connections: This is a crucial step:
- Identify the wires. You'll need to connect the wires according to the included wiring chart. The bare copper wire is the ground wire; never connect any other wires to the ground.
- Twist the wires together using the plastic wire connectors until they're tightly joined. Then, wrap each connector with approved electrical tape to ensure no wire strands are exposed.
- Carefully tuck all the connected wires into the outlet box.
- Attach the Light Fixture: Align the holes in the back plate (E) with the mounting plate (C). Secure them together using the studs (F) you set aside earlier.
- Install the Bulbs and Shades: Insert the light bulbs (not included) into the sockets (H). Then, attach the glass shades (I).
- Final Check: Before you turn the power back on, double-check that everything is properly installed. If you're unsure about any of these steps, it's always best to consult a licensed electrician for assistance.
