Connecting your Durite 0-852-30 DC-DC Battery Charger correctly is key to ensuring it functions safely and efficiently. Here's a step-by-step guide based on the Durite manual:
-
Installation Location: Select a suitable spot for the charger. Ideal locations include the chassis rail, engine bay, or driver's cabin. Make sure it's away from excessively hot engine parts.
-
Cable Sizing: If the provided wires aren't long enough, consult the manual for the recommended wire gauge. Always use wires equal to or thicker than specified to maintain a stable and reliable connection.
-
Wiring Connections:
- OUTPUT (Red): Connect this wire to the positive (+) terminal of your auxiliary battery.
- GND (Black): Connect this wire to the negative (-) terminal of the auxiliary battery or to the vehicle's chassis ground.
- Alternator (Yellow): Attach this wire to the positive (+) terminal of your starting battery.
- IGNITION (Blue): This connection depends on your vehicle's alternator type.
- For standard alternators: Do not connect this wire, but ensure it's insulated to prevent shorts.
- For smart alternators: Connect this wire to the ignition terminal of your vehicle.
- Solar (Green): If you're using a solar panel, connect this wire to the positive (+) terminal of the solar panel. If not using solar, leave it unconnected.
- Reconnect the negative terminal of the battery to complete the circuit.
-
Fuse Installation: Install the recommended fuses in series within the circuit. Bolt-down fuses are preferred for their low resistance connections. Avoid blade-type fuses and self-resetting circuit breakers.
Following these steps will enable your Durite 0-852-30 DC-DC Battery Charger to safely and efficiently charge your auxiliary battery using both your vehicle's alternator and, optionally, a solar panel.
