Installing your Signature Hardware Stavros Vanity Sconce involves a few key steps. Safety first; if you're uncomfortable with electrical work, it's best to consult a professional. Always turn off the power at the circuit breaker or fuse box before beginning.
Before You Begin:
- Inspect the Sconce: Carefully unpack your Signature Hardware Stavros Vanity Sconce and check for any shipping damage. If you find any issues, contact Signature Hardware Customer Relations immediately.
- Gather Supplies: Make sure you have all the necessary tools and components as listed in the Stavros Vanity Sconce's manual.
Installation Steps:
- Prepare the Mounting Strap (Fig 1): Thread the mounting screws into the holes on the circular strap.
- Attach the Strap: Secure the circular strap to the outlet box using outlet box screws.
- Wire Connections: Connect the white wire from the sconce to the white wire from the outlet box and the black wire from the sconce to the black wire from the outlet box. Use the provided wire connectors and electrical tape to ensure secure connections.
- Grounding: Connect the copper ground wires from the sconce and the outlet box to the ground screw on the circular strap.
- Tuck Wires: Carefully tuck the connected wires inside the outlet box.
- Attach the Front Plate: Raise the front plate, aligning the mounting screws with the holes on the front plate. Secure the front plate using the ball nuts.
- Install the Glass (Fig 2): Slip the glass over the socket and secure it with the clip.
- Install Bulb: Insert the light bulb supplied with the sconce. Make sure not to exceed the maximum wattage indicated on the socket.
Care Instructions:
- Cleaning: To clean your Signature Hardware Stavros Vanity Sconce, use a soft cloth. For the glass, use mild soap. Avoid abrasive materials.
If you have further questions or require assistance, Signature Hardware provides support through their Help Center on their website. You can also contact their Customer Service for product and warranty information.
