Installing your new SeaGull Lighting Holman 2, 3, or 4 Light Wall fixture is straightforward. Here’s a step-by-step guide to help you get it done right:
- Mounting Plate Setup: Begin by using the provided mounting plate screws to firmly attach the mounting plate to your electrical box.
- Grounding: Connect the fixture's ground wire to your home's grounding system, always adhering to your local electrical codes for safety.
- Wiring Connections: Carefully connect the wires as follows:
- Link the white fixture wire to the neutral power line wire using a wire nut.
- Connect the black fixture wire to the hot power line wire, also using a wire nut.
- Fixture Base Attachment: Align the fixture base with the mounting plate studs and secure it in place with the two ball nuts.
- Shade Assembly: Position the shade onto the shade base and use the shade tool to secure them by screwing the shade collar nut onto the socket.
- Lamp Installation: Insert the appropriate lamp into the socket.
- Multi-Shade Fixtures: If your Holman fixture has multiple shades, repeat steps 5 and 6 for each shade.
Always remember to switch off the power to the electrical box before you begin. For any challenges during the installation, consider consulting a qualified electrician to ensure everything is correctly and safely installed. For additional support, contact Sea Gull Lighting at 800.323.3226 or explore their website at www.SeaGullLighting.com.
