How to Start a Husqvarna 345BT Cordless Blower?

[McBraxton]

Starting your Husqvarna 345BT cordless blower safely and effectively is straightforward. Here's a step-by-step guide:

Starting a Cold Engine:

1. Set the choke control to the closed choke position.
2. Press the air purge bulb several times to fill it with fuel.
3. Move the throttle control to the fast idle position.
4. Place the blower on a flat surface.
5. Hold the blower securely with one hand and step onto the foot plate with your foot for stability.
6. Slowly pull the starter rope handle until you feel resistance.

Starting a Warm Engine:

• If the temperature is below 32°C / 90°F, follow the same cold engine procedure.
• If the temperature is above 32°C / 90°F, use the same procedure, but do not close the choke control.

Using the Throttle Trigger:

• Press the throttle trigger to increase the blower speed while in use.
• Release the trigger to decrease the blower speed.

Starting the Engine When Fuel is Too Hot:

1. Move the blower to a cooler area, away from direct sunlight.
2. Allow the blower to cool down for at least 20 minutes.
3. Press the air purge bulb for 10-15 seconds.
4. Follow the cold engine starting procedure.

Operating the Blower:

• Use the blower during appropriate work hours and comply with local regulations.
• Adjust the blower speed according to the task at hand.
• Hold the blower nozzle close to the ground for effective performance.

Stopping the Blower:

• Avoid stopping the blower at full speed.
• Press the stop switch to turn off the engine.

For comprehensive instructions and safety guidelines, always consult your Husqvarna 345BT cordless blower's user manual.