Installing your Eurotech Lighting KP914 Daisy Pendant requires careful attention to detail. Follow these steps for a safe and correct installation:
Mounting the Fixture:
- Use the mounting brackets as a template to mark and drill two holes in your ceiling.
- Insert the provided white expansion tubes into the drilled holes.
- Secure the brackets to the ceiling by screwing them into the expansion tubes through the bracket holes.
Connecting the Wires:
- Identify the live, neutral, and earth markings on the connector block.
- Carefully connect the corresponding wires to the connector block, ensuring a secure connection.
- Attach the ceiling rose to the mounting bracket.
Final Steps:
- Insert the LED lamp into the fitting.
- Attach the glass component.
- Double-check all connections and the fixture's stability before turning on the power to test the installation.
Important Safety Information:
- This LED luminaire should be installed by a qualified electrician, adhering to local regulations.
- Ensure that cables are not pinched or damaged by sharp edges during installation.
- Clean the light fixture with a soft cloth and a pH-neutral detergent.
- Any modifications or misuse of the fixture will void the warranty.
- Do not install the pendant on unsuitable, deformed, or high-temperature surfaces.
- Avoid installation in areas with corrosive or explosive materials.
Always prioritize safety and consult a professional if you're unsure about any step of the installation process. Properly installing your Eurotech Lighting KP914 Daisy Pendant will ensure its longevity and your satisfaction.
