To install your TREND A800026-1-S Solo Crystal Pendant Light, follow these steps for a safe and successful setup: First, ensure the power is turned OFF at the circuit breaker. 1. Secure the mounting bar to your outlet box using the box screws provided. 2. Carefully pull the outlet wires (black, white, and ground) from the outlet box. Connect the wires as follows using wire connectors: Connect the black wire from the light fixture to the black (hot) wire from your power source. Connect the white wire from the light fixture to the white (neutral) wire from your power source. Connect the ground wire from the light fixture to the mounting bar using the ground screw or a suitable ground connector. 3. Position the canopy against the outlet box, aligning it with the mounting bar, and secure it using the ball nuts and mounting screws. 4. Prepare the crystal element by gently loosening the glass holder and sliding the K9 crystal up the cable. 5. Insert a G9 bulb (not included) into the light socket. 6. Carefully slide the crystal back down the cable and tighten the glass holder to secure it. 7. Avoid touching the G9 bulb with your bare hands during installation. Once you have followed these steps, your TREND A800026-1-S Solo Crystal Pendant Light should be securely wired and installed. Remember to double-check all connections to ensure everything is properly installed before restoring power. For any doubts, always consult a qualified electrician.
