Maintaining your Cleveland MKGL Series Gas Floor Model Vertical Mixer Kettle involves regular cleaning to ensure optimal performance and safe operation. Here's a step-by-step guide: First, turn off the unit and allow it to cool down to a safe temperature. Remove the drain screen, if your model has one, and wash it with warm water and a mild detergent, either by hand or in a dishwasher. Next, prepare a solution of warm water and mild detergent inside the kettle. Use a nylon brush to scrub away any food residue. For particularly stubborn food particles, consider soaking them at a low temperature setting. After scrubbing, drain the unit completely and thoroughly rinse the interior with fresh water. If your kettle has a Tangent Draw-Off Valve, disassemble it and clean the inside of the valve body using a nylon brush, then rinse with fresh water and reassemble. For models with a Butterfly Valve, open the valve and clean it with warm water and a mild detergent, removing any food deposits with a nylon brush. Rinse with fresh water and leave the valve open when the unit is not in use. To clean the exterior, use a damp sponge with mild soapy water, then rinse and dry. For tougher cleaning tasks, you can use alcohol, baking soda, vinegar, or a diluted ammonia solution. Avoid using chloride-based detergents, quaternary salt cleaners, metal bristle brushes, scrapers, or steel wool, as these can damage the stainless steel surface of your Cleveland MKGL Series kettle. For detailed information and additional care instructions, consult the Nafem Stainless Steel Equipment Care and Cleaning manual provided with your unit. Always prioritize safety and ensure the unit is powered off and cooled down before commencing any cleaning procedures.
