Pairing the transmitter and receiver is essential for the Shanghai Ganite Control Technology BSN-MMN Industrial Wireless Remote Controller to function correctly. Here's a step-by-step guide to help you establish a secure connection:
-
Transmitter Activation:
- Insert the battery into your transmitter.
- Release the emergency stop button located on the side of the transmitter.
- Find the "Start" button, typically on the upper right of the remote control panel, and press it to activate the transmitter.
- Observe the red "signal indicator" on the transmitter; it should blink once per second.
-
Establishing Communication:
- Once the transmitter is activated, it will automatically attempt to connect with the receiver.
- The "power/communication" indicator light on the receiver will also blink once per second when a connection is successfully established.
-
Sending Control Signals:
- Use the side buttons, rocker, or the head switch on the transmitter to send control signals.
- The "signal indicator light" on the transmitter will blink rapidly, three times a second, when a control code signal is being sent.
- The receiver's "function" indicator light will do the same, confirming the reception of the control signal.
-
Emergency Stop Function:
- In case of an emergency, press the "emergency stop" switch on the transmitter.
- The receiver's "emergency stop/failure" indicator light will flash red and blue alternately, indicating that the emergency stop function is activated.
Following these steps will ensure your Shanghai Ganite Control Technology BSN-MMN Industrial Wireless Remote Controller transmitter and receiver are correctly paired, allowing for reliable wireless control within the specified operational distance, typically 20 meters or more.
