Wiring and installing the TREND LIGHTING TW40006ASL Vitozzi Antique Silver Leaf 27 Lighting Sconce safely involves several steps. First, attach the wall anchor (6) to the wall, then secure the mounting plate (7) to the outlet box (1) using the provided mounting screws (15). Next, carefully connect the wires: connect the white wire from the light to the white wire (4) from your power source and the black wire from the light to the black wire (3) from your power source. Loop the ground wire (2) to the mounting plate (7) using a ground connector (8). After making these connections, neatly tuck the wires into the wall outlet box. Place the back plate (10) over the mounting plate (7) and secure it with the ball nut (13). Attach the frame (14) to the back plate (10) by aligning the threaded holes and inserting the four back plate screws (11) using the allen wrench (12) until secure. Finally, install the appropriate bulbs (not included), making sure not to exceed the recommended maximum capacity. Before starting any electrical work, always turn off the main power at the circuit breaker to prevent electrical shock. Ensure all electrical connections comply with local and National Electrical Code (N.E.C.) standards. If you are uncertain about any step, consult a qualified electrician. Following these instructions will help you properly wire and install your TREND LIGHTING TW40006ASL Vitozzi Antique Silver Leaf 27 Lighting Sconce.
