Keeping your ATLONA AT-OME-EX-RX Omega 4K-UHD HDMI Over HDBaseT Receiver with USB updated ensures peak performance. Here's how to update its firmware:
- Requirements: You'll need the AT-OME-EX-RX unit, the correct firmware file, a Windows PC, and a USB-A to USB mini-B cable.
- Power Down: Unplug the power supply from your AT-OME-EX-RX unit.
- Connect USB: Connect your computer to the unit's FW port using the USB-A to USB mini-B cable.
- Power Up: Plug the power supply back into the AT-OME-EX-RX.
- Access Firmware Drive: A USB UPDATE drive should appear. If it doesn't, locate and select it in Windows Explorer.
- Clean the Drive: Delete any files currently in the USB UPDATE drive.
- Add Firmware: Drag and drop the new firmware file into the USB UPDATE drive.
- Update in Progress: The PWR LED on the front will blink green during the update. Do not disconnect the USB cable during this process. Wait until the PWR LED turns solid green.
- Disconnect USB: Once the light is solid green, the update is complete. Disconnect the USB cable.
Following these steps will ensure your ATLONA AT-OME-EX-RX is running the latest software, optimizing its functionality.